mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![York Sun](/assets/img/avatar_default.png)
In early MMU table, DDR has to be mapped as device memory to avoid speculative access. After DDR is initialized, it needs to be updated to normal memory to allow code execution. To simplify the code, dram_init() is moved into a common file as a weak function. Signed-off-by: York Sun <york.sun@nxp.com>
164 lines
3.2 KiB
C
164 lines
3.2 KiB
C
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <asm/arch/ppa.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <hwconfig.h>
|
|
#include <ahci.h>
|
|
#include <mmc.h>
|
|
#include <scsi.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_csu.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <power/mc34vr500_pmic.h>
|
|
#include "cpld.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
|
|
u8 cfg_rcw_src1, cfg_rcw_src2;
|
|
u16 cfg_rcw_src;
|
|
u8 sd1refclk_sel;
|
|
|
|
puts("Board: LS1046ARDB, boot from ");
|
|
|
|
cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
|
|
cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
|
|
cpld_rev_bit(&cfg_rcw_src1);
|
|
cfg_rcw_src = cfg_rcw_src1;
|
|
cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
|
|
|
|
if (cfg_rcw_src == 0x44)
|
|
printf("QSPI vBank %d\n", CPLD_READ(vbank));
|
|
else if (cfg_rcw_src == 0x40)
|
|
puts("SD\n");
|
|
else
|
|
puts("Invalid setting of SW5\n");
|
|
|
|
printf("CPLD: V%x.%x\nPCBA: V%x.0\n", CPLD_READ(cpld_ver),
|
|
CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
|
|
|
|
puts("SERDES Reference Clocks:\n");
|
|
sd1refclk_sel = CPLD_READ(sd1refclk_sel);
|
|
printf("SD1_CLK1 = %s, SD1_CLK2 = %s\n", freq[sd1refclk_sel], freq[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
fsl_lsch2_early_init_f();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
|
|
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
|
|
enable_layerscape_ns_access();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_LS_PPA
|
|
ppa_init();
|
|
#endif
|
|
|
|
/* invert AQR105 IRQ pins polarity */
|
|
out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_setup_core_volt(u32 vdd)
|
|
{
|
|
bool en_0v9;
|
|
|
|
en_0v9 = (vdd == 900) ? true : false;
|
|
cpld_select_core_volt(en_0v9);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int get_serdes_volt(void)
|
|
{
|
|
return mc34vr500_get_sw_volt(SW4);
|
|
}
|
|
|
|
int set_serdes_volt(int svdd)
|
|
{
|
|
return mc34vr500_set_sw_volt(SW4, svdd);
|
|
}
|
|
|
|
int power_init_board(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = power_mc34vr500_init(0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
setup_chip_volt();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void config_board_mux(void)
|
|
{
|
|
#ifdef CONFIG_HAS_FSL_XHCI_USB
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
u32 usb_pwrfault;
|
|
|
|
/* USB3 is not used, configure mux to IIC4_SCL/IIC4_SDA */
|
|
out_be32(&scfg->rcwpmuxcr0, 0x3300);
|
|
out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
|
|
usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
|
|
SCFG_USBPWRFAULT_USB3_SHIFT) |
|
|
(SCFG_USBPWRFAULT_DEDICATED <<
|
|
SCFG_USBPWRFAULT_USB2_SHIFT) |
|
|
(SCFG_USBPWRFAULT_SHARED <<
|
|
SCFG_USBPWRFAULT_USB1_SHIFT);
|
|
out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
int misc_init_r(void)
|
|
{
|
|
config_board_mux();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u64 base[CONFIG_NR_DRAM_BANKS];
|
|
u64 size[CONFIG_NR_DRAM_BANKS];
|
|
|
|
/* fixup DT for the two DDR banks */
|
|
base[0] = gd->bd->bi_dram[0].start;
|
|
size[0] = gd->bd->bi_dram[0].size;
|
|
base[1] = gd->bd->bi_dram[1].start;
|
|
size[1] = gd->bd->bi_dram[1].size;
|
|
|
|
fdt_fixup_memory_banks(blob, base, size, 2);
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|