mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
123 lines
3.2 KiB
C
123 lines
3.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2011, Google Inc.
|
|
*/
|
|
|
|
#ifndef ASM_ARCH_PEI_DATA_H
|
|
#define ASM_ARCH_PEI_DATA_H
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
struct pch_usb3_controller_settings {
|
|
/* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
|
|
uint16_t mode;
|
|
/* 4 bit mask, 1: switchable, 0: not switchable */
|
|
uint16_t hs_port_switch_mask;
|
|
/* 0: No xHCI preOS driver, 1: xHCI preOS driver */
|
|
uint16_t preboot_support;
|
|
/* 0: Disable, 1: Enable */
|
|
uint16_t xhci_streams;
|
|
};
|
|
|
|
typedef asmlinkage void (*tx_byte_func)(unsigned char byte);
|
|
|
|
#define PEI_VERSION 6
|
|
|
|
struct __packed pei_data {
|
|
uint32_t pei_version;
|
|
uint32_t mchbar;
|
|
uint32_t dmibar;
|
|
uint32_t epbar;
|
|
uint32_t pciexbar;
|
|
uint16_t smbusbar;
|
|
uint32_t wdbbar;
|
|
uint32_t wdbsize;
|
|
uint32_t hpet_address;
|
|
uint32_t rcba;
|
|
uint32_t pmbase;
|
|
uint32_t gpiobase;
|
|
uint32_t thermalbase;
|
|
uint32_t system_type; /* 0 Mobile, 1 Desktop/Server */
|
|
uint32_t tseg_size;
|
|
uint8_t spd_addresses[4];
|
|
uint8_t ts_addresses[4];
|
|
int boot_mode;
|
|
int ec_present;
|
|
int gbe_enable;
|
|
/*
|
|
* 0 = leave channel enabled
|
|
* 1 = disable dimm 0 on channel
|
|
* 2 = disable dimm 1 on channel
|
|
* 3 = disable dimm 0+1 on channel
|
|
*/
|
|
int dimm_channel0_disabled;
|
|
int dimm_channel1_disabled;
|
|
/* Seed values saved in CMOS */
|
|
uint32_t scrambler_seed;
|
|
uint32_t scrambler_seed_s3;
|
|
/* Data read from flash and passed into MRC */
|
|
unsigned char *mrc_input;
|
|
unsigned int mrc_input_len;
|
|
/* Data from MRC that should be saved to flash */
|
|
unsigned char *mrc_output;
|
|
unsigned int mrc_output_len;
|
|
/*
|
|
* Max frequency DDR3 could be ran at. Could be one of four values:
|
|
* 800, 1067, 1333, 1600
|
|
*/
|
|
uint32_t max_ddr3_freq;
|
|
/*
|
|
* USB Port Configuration:
|
|
* [0] = enable
|
|
* [1] = overcurrent pin
|
|
* [2] = length
|
|
*
|
|
* Ports 0-7 can be mapped to OC0-OC3
|
|
* Ports 8-13 can be mapped to OC4-OC7
|
|
*
|
|
* Port Length
|
|
* MOBILE:
|
|
* < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
|
|
* < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
|
|
* DESKTOP:
|
|
* < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
|
|
* < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
|
|
* < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
|
|
*/
|
|
uint16_t usb_port_config[16][3];
|
|
/* See the usb3 struct above for details */
|
|
struct pch_usb3_controller_settings usb3;
|
|
/*
|
|
* SPD data array for onboard RAM. Specify address 0xf0,
|
|
* 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
|
|
* spd_address for a given "DIMM".
|
|
*/
|
|
uint8_t spd_data[4][256];
|
|
tx_byte_func tx_byte;
|
|
int ddr3lv_support;
|
|
/*
|
|
* pcie_init needs to be set to 1 to have the system agent initialise
|
|
* PCIe. Note: This should only be required if your system has Gen3
|
|
* devices and it will increase your boot time by at least 100ms.
|
|
*/
|
|
int pcie_init;
|
|
/*
|
|
* N mode functionality. Leave this setting at 0.
|
|
* 0 Auto
|
|
* 1 1N
|
|
* 2 2N
|
|
*/
|
|
int nmode;
|
|
/*
|
|
* DDR refresh rate config. JEDEC Standard No.21-C Annex K allows
|
|
* for DIMM SPD data to specify whether double-rate is required for
|
|
* extended operating temperature range.
|
|
* 0 Enable double rate based upon temperature thresholds
|
|
* 1 Normal rate
|
|
* 2 Always enable double rate
|
|
*/
|
|
int ddr_refresh_rate_config;
|
|
};
|
|
|
|
#endif
|