mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
248 lines
7.9 KiB
C
248 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Derived from mpc85xx_ddr_gen3.c, removed all workarounds
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/processor.h>
|
|
#include <fsl_immap.h>
|
|
#include <fsl_ddr.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
|
|
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
|
|
#endif
|
|
|
|
|
|
/*
|
|
* regs has the to-be-set values for DDR controller registers
|
|
* ctrl_num is the DDR controller number
|
|
* step: 0 goes through the initialization in one pass
|
|
* 1 sets registers and returns before enabling controller
|
|
* 2 resumes from step 1 and continues to initialize
|
|
* Dividing the initialization to two steps to deassert DDR reset signal
|
|
* to comply with JEDEC specs for RDIMMs.
|
|
*/
|
|
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
|
|
unsigned int ctrl_num, int step)
|
|
{
|
|
unsigned int i, bus_width;
|
|
struct ccsr_ddr __iomem *ddr;
|
|
u32 temp_sdram_cfg;
|
|
u32 total_gb_size_per_controller;
|
|
int timeout;
|
|
|
|
switch (ctrl_num) {
|
|
case 0:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
break;
|
|
#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
|
|
case 1:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
|
|
case 2:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
|
|
case 3:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
|
|
return;
|
|
}
|
|
|
|
if (step == 2)
|
|
goto step2;
|
|
|
|
if (regs->ddr_eor)
|
|
ddr_out32(&ddr->eor, regs->ddr_eor);
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
if (i == 0) {
|
|
ddr_out32(&ddr->cs0_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs0_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs0_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 1) {
|
|
ddr_out32(&ddr->cs1_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs1_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs1_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 2) {
|
|
ddr_out32(&ddr->cs2_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs2_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs2_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 3) {
|
|
ddr_out32(&ddr->cs3_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs3_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs3_config_2, regs->cs[i].config_2);
|
|
}
|
|
}
|
|
|
|
ddr_out32(&ddr->timing_cfg_3, regs->timing_cfg_3);
|
|
ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
|
|
ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
|
|
ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
|
|
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
|
|
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
|
|
ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
|
|
ddr_out32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
|
|
ddr_out32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
|
|
ddr_out32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
|
|
ddr_out32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
|
|
ddr_out32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
|
|
ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
|
|
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
|
|
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
|
|
ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
|
|
ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
|
|
ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
|
|
ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
|
|
#ifndef CONFIG_SYS_FSL_DDR_EMU
|
|
/*
|
|
* Skip these two registers if running on emulator
|
|
* because emulator doesn't have skew between bytes.
|
|
*/
|
|
|
|
if (regs->ddr_wrlvl_cntl_2)
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
|
|
if (regs->ddr_wrlvl_cntl_3)
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
|
|
#endif
|
|
|
|
ddr_out32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
|
|
ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
|
|
ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
|
|
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
ddr_out32(&ddr->sdram_cfg_2,
|
|
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
|
|
ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
|
|
ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
|
|
|
|
/* DRAM VRef will not be trained */
|
|
ddr_out32(&ddr->ddr_cdr2,
|
|
regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
|
|
} else
|
|
#endif
|
|
{
|
|
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
|
|
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
|
|
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
|
|
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
|
|
}
|
|
ddr_out32(&ddr->err_disable, regs->err_disable);
|
|
ddr_out32(&ddr->err_int_en, regs->err_int_en);
|
|
for (i = 0; i < 32; i++) {
|
|
if (regs->debug[i]) {
|
|
debug("Write to debug_%d as %08x\n", i + 1,
|
|
regs->debug[i]);
|
|
ddr_out32(&ddr->debug[i], regs->debug[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For RDIMMs, JEDEC spec requires clocks to be stable before reset is
|
|
* deasserted. Clocks start when any chip select is enabled and clock
|
|
* control register is set. Because all DDR components are connected to
|
|
* one reset signal, this needs to be done in two steps. Step 1 is to
|
|
* get the clocks started. Step 2 resumes after reset signal is
|
|
* deasserted.
|
|
*/
|
|
if (step == 1) {
|
|
udelay(200);
|
|
return;
|
|
}
|
|
|
|
step2:
|
|
/* Set, but do not enable the memory */
|
|
temp_sdram_cfg = regs->ddr_sdram_cfg;
|
|
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
|
|
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg);
|
|
|
|
/*
|
|
* 500 painful micro-seconds must elapse between
|
|
* the DDR clock setup and the DDR config enable.
|
|
* DDR2 need 200 us, and DDR3 need 500 us from spec,
|
|
* we choose the max, that is 500 us for all of case.
|
|
*/
|
|
udelay(500);
|
|
asm volatile("dsb sy;isb");
|
|
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
/* enter self-refresh */
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
|
|
temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
|
|
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
|
|
/* do board specific memory setup */
|
|
board_mem_sleep_setup();
|
|
|
|
temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
|
|
} else
|
|
#endif
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
|
|
/* Let the controller go */
|
|
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
|
|
asm volatile("dsb sy;isb");
|
|
|
|
total_gb_size_per_controller = 0;
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
if (!(regs->cs[i].config & 0x80000000))
|
|
continue;
|
|
total_gb_size_per_controller += 1 << (
|
|
((regs->cs[i].config >> 14) & 0x3) + 2 +
|
|
((regs->cs[i].config >> 8) & 0x7) + 12 +
|
|
((regs->cs[i].config >> 0) & 0x7) + 8 +
|
|
3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
|
|
26); /* minus 26 (count of 64M) */
|
|
}
|
|
if (regs->cs[0].config & 0x20000000) {
|
|
/* 2-way interleaving */
|
|
total_gb_size_per_controller <<= 1;
|
|
}
|
|
/*
|
|
* total memory / bus width = transactions needed
|
|
* transactions needed / data rate = seconds
|
|
* to add plenty of buffer, double the time
|
|
* For example, 2GB on 666MT/s 64-bit bus takes about 402ms
|
|
* Let's wait for 800ms
|
|
*/
|
|
bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK)
|
|
>> SDRAM_CFG_DBW_SHIFT);
|
|
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
|
|
(get_ddr_freq(ctrl_num) >> 20)) << 1;
|
|
total_gb_size_per_controller >>= 4; /* shift down to gb size */
|
|
debug("total %d GB\n", total_gb_size_per_controller);
|
|
debug("Need to wait up to %d * 10ms\n", timeout);
|
|
|
|
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
|
|
while ((ddr_in32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
|
|
(timeout >= 0)) {
|
|
udelay(10000); /* throttle polling rate */
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0)
|
|
printf("Waiting for D_INIT timeout. Memory may not work.\n");
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
/* exit self-refresh */
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
|
|
temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
|
|
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
|
|
}
|
|
#endif
|
|
}
|