mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
273 lines
6.9 KiB
C
273 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2019 Google LLC
|
|
*
|
|
* Portions taken from coreboot
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <ec_commands.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <spi_flash.h>
|
|
#include <spl.h>
|
|
#include <syscon.h>
|
|
#include <acpi/acpi_s3.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/cpu_common.h>
|
|
#include <asm/cpu_x86.h>
|
|
#include <asm/fast_spi.h>
|
|
#include <asm/intel_pinctrl.h>
|
|
#include <asm/intel_regs.h>
|
|
#include <asm/io.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/mtrr.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/iomap.h>
|
|
#include <asm/arch/lpc.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/arch/systemagent.h>
|
|
#include <asm/arch/uart.h>
|
|
#include <asm/fsp2/fsp_api.h>
|
|
#include <linux/sizes.h>
|
|
#include <power/acpi_pmc.h>
|
|
|
|
/* Define this here to avoid referencing any drivers for the debug UART 1 */
|
|
#define PCH_DEV_P2SB PCI_BDF(0, 0x0d, 0)
|
|
|
|
static void pch_uart_init(void)
|
|
{
|
|
/*
|
|
* Set up the pinmux so that the UART rx/tx signals are connected
|
|
* outside the SoC.
|
|
*
|
|
* There are about 500 lines of code required to program the GPIO
|
|
* configuration for the UARTs. But it boils down to four writes, and
|
|
* for the debug UART we want the minimum possible amount of code before
|
|
* the UART is running. So just add the magic writes here. See
|
|
* apl_hostbridge_early_init_pinctrl() for the full horror.
|
|
*/
|
|
if (PCI_FUNC(PCH_DEV_UART) == 1) {
|
|
writel(0x40000402, 0xd0c50650);
|
|
writel(0x3c47, 0xd0c50654);
|
|
writel(0x40000400, 0xd0c50658);
|
|
writel(0x3c48, 0xd0c5065c);
|
|
} else { /* UART2 */
|
|
writel(0x40000402, 0xd0c50670);
|
|
writel(0x3c4b, 0xd0c50674);
|
|
writel(0x40000400, 0xd0c50678);
|
|
writel(0x3c4c, 0xd0c5067c);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_UART
|
|
apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE);
|
|
#endif
|
|
}
|
|
|
|
static void p2sb_enable_bar(ulong bar)
|
|
{
|
|
/* Enable PCR Base address in PCH */
|
|
pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_0, bar,
|
|
PCI_SIZE_32);
|
|
pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
|
|
|
|
/* Enable P2SB MSE */
|
|
pci_x86_write_config(PCH_DEV_P2SB, PCI_COMMAND,
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY,
|
|
PCI_SIZE_8);
|
|
}
|
|
|
|
/*
|
|
* board_debug_uart_init() - Init the debug UART ready for use
|
|
*
|
|
* This is the minimum init needed to get the UART running. It avoids any
|
|
* drivers or complex code, so that the UART is running as soon as possible.
|
|
*/
|
|
void board_debug_uart_init(void)
|
|
{
|
|
p2sb_enable_bar(IOMAP_P2SB_BAR);
|
|
pch_uart_init();
|
|
}
|
|
|
|
static int fast_spi_cache_bios_region(void)
|
|
{
|
|
uint map_size, offset;
|
|
ulong map_base, base;
|
|
int ret;
|
|
|
|
ret = fast_spi_early_init(PCH_DEV_SPI, IOMAP_SPI_BASE);
|
|
if (ret)
|
|
return log_msg_ret("early_init", ret);
|
|
|
|
ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size,
|
|
&offset);
|
|
if (ret)
|
|
return log_msg_ret("get_mmap", ret);
|
|
|
|
base = SZ_4G - map_size;
|
|
mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size);
|
|
log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void enable_pm_timer_emulation(struct udevice *pmc)
|
|
{
|
|
struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(pmc);
|
|
msr_t msr;
|
|
|
|
/*
|
|
* The derived frequency is calculated as follows:
|
|
* (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
|
|
*
|
|
* Back-solve the multiplier so the 3.579545MHz ACPI timer frequency is
|
|
* used.
|
|
*/
|
|
msr.hi = (3579545ULL << 32) / CTC_FREQ;
|
|
|
|
/* Set PM1 timer IO port and enable */
|
|
msr.lo = EMULATE_PM_TMR_EN | (upriv->acpi_base + R_ACPI_PM1_TMR);
|
|
debug("PM timer %x %x\n", msr.hi, msr.lo);
|
|
msr_write(MSR_EMULATE_PM_TIMER, msr);
|
|
}
|
|
|
|
static void google_chromeec_ioport_range(uint *out_basep, uint *out_sizep)
|
|
{
|
|
uint base;
|
|
uint size;
|
|
|
|
if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_MEC)) {
|
|
base = MEC_EMI_BASE;
|
|
size = MEC_EMI_SIZE;
|
|
} else {
|
|
base = EC_HOST_CMD_REGION0;
|
|
size = 2 * EC_HOST_CMD_REGION_SIZE;
|
|
/* Make sure MEMMAP region follows host cmd region */
|
|
assert(base + size == EC_LPC_ADDR_MEMMAP);
|
|
size += EC_MEMMAP_SIZE;
|
|
}
|
|
|
|
*out_basep = base;
|
|
*out_sizep = size;
|
|
}
|
|
|
|
static void early_ec_init(void)
|
|
{
|
|
uint base, size;
|
|
|
|
/*
|
|
* Set up LPC decoding for the Chrome OS EC I/O port ranges:
|
|
* - Ports 62/66, 60/64, and 200->208
|
|
* - Chrome OS EC communication I/O ports
|
|
*/
|
|
lpc_enable_fixed_io_ranges(LPC_IOE_EC_62_66 | LPC_IOE_KBC_60_64 |
|
|
LPC_IOE_LGE_200);
|
|
google_chromeec_ioport_range(&base, &size);
|
|
lpc_open_pmio_window(base, size);
|
|
}
|
|
|
|
static int arch_cpu_init_tpl(void)
|
|
{
|
|
struct udevice *pmc, *sa, *p2sb, *serial, *spi, *lpc;
|
|
int ret;
|
|
|
|
ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
|
|
if (ret)
|
|
return log_msg_ret("PMC", ret);
|
|
|
|
/* Clear global reset promotion bit */
|
|
ret = pmc_global_reset_set_enable(pmc, false);
|
|
if (ret)
|
|
return log_msg_ret("disable global reset", ret);
|
|
|
|
enable_pm_timer_emulation(pmc);
|
|
|
|
ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
|
|
if (ret)
|
|
return log_msg_ret("p2sb", ret);
|
|
ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &sa);
|
|
if (ret)
|
|
return log_msg_ret("northbridge", ret);
|
|
gd->baudrate = CONFIG_BAUDRATE;
|
|
ret = uclass_first_device_err(UCLASS_SERIAL, &serial);
|
|
if (ret)
|
|
return log_msg_ret("serial", ret);
|
|
if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) {
|
|
ret = uclass_first_device_err(UCLASS_SPI, &spi);
|
|
if (ret)
|
|
return log_msg_ret("SPI", ret);
|
|
} else {
|
|
/* Alternative code if we don't have SPI in TPL */
|
|
if (IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH))
|
|
printf("Warning: Enable APL_SPI_FLASHBOOT to use SPI-flash driver in TPL");
|
|
ret = fast_spi_cache_bios_region();
|
|
if (ret)
|
|
return log_msg_ret("BIOS cache", ret);
|
|
}
|
|
ret = pmc_disable_tco(pmc);
|
|
if (ret)
|
|
return log_msg_ret("disable TCO", ret);
|
|
ret = pmc_gpe_init(pmc);
|
|
if (ret)
|
|
return log_msg_ret("pmc_gpe", ret);
|
|
ret = uclass_first_device_err(UCLASS_LPC, &lpc);
|
|
if (ret)
|
|
return log_msg_ret("lpc", ret);
|
|
|
|
early_ec_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Enables several BARs and devices which are needed for memory init
|
|
* - MCH_BASE_ADDR is needed in order to talk to the memory controller
|
|
* - HPET is enabled because FSP wants to store a pointer to global data in the
|
|
* HPET comparator register
|
|
*/
|
|
static int arch_cpu_init_spl(void)
|
|
{
|
|
struct udevice *pmc, *p2sb;
|
|
int ret;
|
|
|
|
ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
|
|
if (ret)
|
|
return log_msg_ret("Could not probe PMC", ret);
|
|
ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
|
|
if (ret)
|
|
return log_msg_ret("Cannot set up p2sb", ret);
|
|
|
|
lpc_io_setup_comm_a_b();
|
|
|
|
/* TODO(sjg@chromium.org): Enable upper RTC bank here */
|
|
|
|
ret = pmc_init(pmc);
|
|
if (ret < 0)
|
|
return log_msg_ret("Could not init PMC", ret);
|
|
#ifdef CONFIG_HAVE_ACPI_RESUME
|
|
ret = pmc_prev_sleep_state(pmc);
|
|
if (ret < 0)
|
|
return log_msg_ret("Could not get PMC sleep state", ret);
|
|
gd->arch.prev_sleep_state = ret;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (spl_phase() == PHASE_TPL)
|
|
ret = arch_cpu_init_tpl();
|
|
else if (spl_phase() == PHASE_SPL)
|
|
ret = arch_cpu_init_spl();
|
|
if (ret)
|
|
printf("%s: Error %d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|