mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-08 22:03:22 +09:00
![Simon Glass](/assets/img/avatar_default.png)
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
337 lines
11 KiB
C
337 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <div64.h>
|
|
#include <fdtdec.h>
|
|
#include <hang.h>
|
|
#include <init.h>
|
|
#include <ram.h>
|
|
#include <reset.h>
|
|
#include "sdram_s10.h"
|
|
#include <wait_bit.h>
|
|
#include <asm/arch/firewall.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/io.h>
|
|
#include <linux/sizes.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define DDR_CONFIG(A, B, C, R) (((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
|
|
|
|
/* The followring are the supported configurations */
|
|
u32 ddr_config[] = {
|
|
/* DDR_CONFIG(Address order,Bank,Column,Row) */
|
|
/* List for DDR3 or LPDDR3 (pinout order > chip, row, bank, column) */
|
|
DDR_CONFIG(0, 3, 10, 12),
|
|
DDR_CONFIG(0, 3, 9, 13),
|
|
DDR_CONFIG(0, 3, 10, 13),
|
|
DDR_CONFIG(0, 3, 9, 14),
|
|
DDR_CONFIG(0, 3, 10, 14),
|
|
DDR_CONFIG(0, 3, 10, 15),
|
|
DDR_CONFIG(0, 3, 11, 14),
|
|
DDR_CONFIG(0, 3, 11, 15),
|
|
DDR_CONFIG(0, 3, 10, 16),
|
|
DDR_CONFIG(0, 3, 11, 16),
|
|
DDR_CONFIG(0, 3, 12, 15), /* 0xa */
|
|
/* List for DDR4 only (pinout order > chip, bank, row, column) */
|
|
DDR_CONFIG(1, 3, 10, 14),
|
|
DDR_CONFIG(1, 4, 10, 14),
|
|
DDR_CONFIG(1, 3, 10, 15),
|
|
DDR_CONFIG(1, 4, 10, 15),
|
|
DDR_CONFIG(1, 3, 10, 16),
|
|
DDR_CONFIG(1, 4, 10, 16),
|
|
DDR_CONFIG(1, 3, 10, 17),
|
|
DDR_CONFIG(1, 4, 10, 17),
|
|
};
|
|
|
|
int match_ddr_conf(u32 ddr_conf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ddr_config); i++) {
|
|
if (ddr_conf == ddr_config[i])
|
|
return i;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sdram_mmr_init_full() - Function to initialize SDRAM MMR
|
|
*
|
|
* Initialize the SDRAM MMR.
|
|
*/
|
|
int sdram_mmr_init_full(struct udevice *dev)
|
|
{
|
|
struct altera_sdram_platdata *plat = dev->platdata;
|
|
struct altera_sdram_priv *priv = dev_get_priv(dev);
|
|
u32 update_value, io48_value, ddrioctl;
|
|
u32 i;
|
|
int ret;
|
|
phys_size_t hw_size;
|
|
bd_t bd = {0};
|
|
|
|
/* Enable access to DDR from CPU master */
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_DDRREG),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE0),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1A),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1B),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1C),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1D),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1E),
|
|
CCU_ADBASE_DI_MASK);
|
|
|
|
/* Enable access to DDR from IO master */
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE0),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1A),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1B),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1C),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1D),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1E),
|
|
CCU_ADBASE_DI_MASK);
|
|
|
|
/* Enable access to DDR from TCU */
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE0),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE1A),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE1B),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE1C),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE1D),
|
|
CCU_ADBASE_DI_MASK);
|
|
clrbits_le32(CCU_REG_ADDR(CCU_TCU_MPRT_ADBASE_MEMSPACE1E),
|
|
CCU_ADBASE_DI_MASK);
|
|
|
|
/* this enables nonsecure access to DDR */
|
|
/* mpuregion0addr_limit */
|
|
FW_MPU_DDR_SCR_WRITEL(0xFFFF0000, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT);
|
|
FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT);
|
|
|
|
/* nonmpuregion0addr_limit */
|
|
FW_MPU_DDR_SCR_WRITEL(0xFFFF0000,
|
|
FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT);
|
|
FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT);
|
|
|
|
/* Enable mpuregion0enable and nonmpuregion0enable */
|
|
FW_MPU_DDR_SCR_WRITEL(MPUREGION0_ENABLE | NONMPUREGION0_ENABLE,
|
|
FW_MPU_DDR_SCR_EN_SET);
|
|
|
|
/* Ensure HMC clock is running */
|
|
if (poll_hmc_clock_status()) {
|
|
puts("DDR: Error as HMC clock not running\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Try 3 times to do a calibration */
|
|
for (i = 0; i < 3; i++) {
|
|
ret = wait_for_bit_le32((const void *)(plat->hmc +
|
|
DDRCALSTAT),
|
|
DDR_HMC_DDRCALSTAT_CAL_MSK, true, 1000,
|
|
false);
|
|
if (!ret)
|
|
break;
|
|
|
|
emif_reset(plat);
|
|
}
|
|
|
|
if (ret) {
|
|
puts("DDR: Error as SDRAM calibration failed\n");
|
|
return -1;
|
|
}
|
|
debug("DDR: Calibration success\n");
|
|
|
|
u32 ctrlcfg0 = hmc_readl(plat, CTRLCFG0);
|
|
u32 ctrlcfg1 = hmc_readl(plat, CTRLCFG1);
|
|
u32 dramaddrw = hmc_readl(plat, DRAMADDRW);
|
|
u32 dramtim0 = hmc_readl(plat, DRAMTIMING0);
|
|
u32 caltim0 = hmc_readl(plat, CALTIMING0);
|
|
u32 caltim1 = hmc_readl(plat, CALTIMING1);
|
|
u32 caltim2 = hmc_readl(plat, CALTIMING2);
|
|
u32 caltim3 = hmc_readl(plat, CALTIMING3);
|
|
u32 caltim4 = hmc_readl(plat, CALTIMING4);
|
|
u32 caltim9 = hmc_readl(plat, CALTIMING9);
|
|
|
|
/*
|
|
* Configure the DDR IO size [0xFFCFB008]
|
|
* niosreserve0: Used to indicate DDR width &
|
|
* bit[7:0] = Number of data bits (bit[6:5] 0x01=32bit, 0x10=64bit)
|
|
* bit[8] = 1 if user-mode OCT is present
|
|
* bit[9] = 1 if warm reset compiled into EMIF Cal Code
|
|
* bit[10] = 1 if warm reset is on during generation in EMIF Cal
|
|
* niosreserve1: IP ADCDS version encoded as 16 bit value
|
|
* bit[2:0] = Variant (0=not special,1=FAE beta, 2=Customer beta,
|
|
* 3=EAP, 4-6 are reserved)
|
|
* bit[5:3] = Service Pack # (e.g. 1)
|
|
* bit[9:6] = Minor Release #
|
|
* bit[14:10] = Major Release #
|
|
*/
|
|
update_value = hmc_readl(plat, NIOSRESERVED0);
|
|
hmc_ecc_writel(plat, ((update_value & 0xFF) >> 5), DDRIOCTRL);
|
|
ddrioctl = hmc_ecc_readl(plat, DDRIOCTRL);
|
|
|
|
/* enable HPS interface to HMC */
|
|
hmc_ecc_writel(plat, DDR_HMC_HPSINTFCSEL_ENABLE_MASK, HPSINTFCSEL);
|
|
|
|
/* Set the DDR Configuration */
|
|
io48_value = DDR_CONFIG(CTRLCFG1_CFG_ADDR_ORDER(ctrlcfg1),
|
|
(DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) +
|
|
DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw)),
|
|
DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw),
|
|
DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw));
|
|
|
|
update_value = match_ddr_conf(io48_value);
|
|
if (update_value)
|
|
ddr_sch_writel(plat, update_value, DDR_SCH_DDRCONF);
|
|
|
|
/* Configure HMC dramaddrw */
|
|
hmc_ecc_writel(plat, hmc_readl(plat, DRAMADDRW), DRAMADDRWIDTH);
|
|
|
|
/*
|
|
* Configure DDR timing
|
|
* RDTOMISS = tRTP + tRP + tRCD - BL/2
|
|
* WRTOMISS = WL + tWR + tRP + tRCD and
|
|
* WL = RL + BL/2 + 2 - rd-to-wr ; tWR = 15ns so...
|
|
* First part of equation is in memory clock units so divide by 2
|
|
* for HMC clock units. 1066MHz is close to 1ns so use 15 directly.
|
|
* WRTOMISS = ((RL + BL/2 + 2 + tWR) >> 1)- rd-to-wr + tRP + tRCD
|
|
*/
|
|
u32 burst_len = CTRLCFG0_CFG_CTRL_BURST_LEN(ctrlcfg0);
|
|
|
|
update_value = CALTIMING2_CFG_RD_TO_WR_PCH(caltim2) +
|
|
CALTIMING4_CFG_PCH_TO_VALID(caltim4) +
|
|
CALTIMING0_CFG_ACT_TO_RDWR(caltim0) -
|
|
(burst_len >> 2);
|
|
io48_value = (((DRAMTIMING0_CFG_TCL(dramtim0) + 2 + DDR_TWR +
|
|
(burst_len >> 1)) >> 1) -
|
|
/* Up to here was in memory cycles so divide by 2 */
|
|
CALTIMING1_CFG_RD_TO_WR(caltim1) +
|
|
CALTIMING0_CFG_ACT_TO_RDWR(caltim0) +
|
|
CALTIMING4_CFG_PCH_TO_VALID(caltim4));
|
|
|
|
ddr_sch_writel(plat, ((CALTIMING0_CFG_ACT_TO_ACT(caltim0) <<
|
|
DDR_SCH_DDRTIMING_ACTTOACT_OFF) |
|
|
(update_value << DDR_SCH_DDRTIMING_RDTOMISS_OFF) |
|
|
(io48_value << DDR_SCH_DDRTIMING_WRTOMISS_OFF) |
|
|
((burst_len >> 2) << DDR_SCH_DDRTIMING_BURSTLEN_OFF) |
|
|
(CALTIMING1_CFG_RD_TO_WR(caltim1) <<
|
|
DDR_SCH_DDRTIMING_RDTOWR_OFF) |
|
|
(CALTIMING3_CFG_WR_TO_RD(caltim3) <<
|
|
DDR_SCH_DDRTIMING_WRTORD_OFF) |
|
|
(((ddrioctl == 1) ? 1 : 0) <<
|
|
DDR_SCH_DDRTIMING_BWRATIO_OFF)),
|
|
DDR_SCH_DDRTIMING);
|
|
|
|
/* Configure DDR mode [precharge = 0] */
|
|
ddr_sch_writel(plat, ((ddrioctl ? 0 : 1) <<
|
|
DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF),
|
|
DDR_SCH_DDRMODE);
|
|
|
|
/* Configure the read latency */
|
|
ddr_sch_writel(plat, (DRAMTIMING0_CFG_TCL(dramtim0) >> 1) +
|
|
DDR_READ_LATENCY_DELAY,
|
|
DDR_SCH_READ_LATENCY);
|
|
|
|
/*
|
|
* Configuring timing values concerning activate commands
|
|
* [FAWBANK alway 1 because always 4 bank DDR]
|
|
*/
|
|
ddr_sch_writel(plat, ((CALTIMING0_CFG_ACT_TO_ACT_DB(caltim0) <<
|
|
DDR_SCH_ACTIVATE_RRD_OFF) |
|
|
(CALTIMING9_CFG_4_ACT_TO_ACT(caltim9) <<
|
|
DDR_SCH_ACTIVATE_FAW_OFF) |
|
|
(DDR_ACTIVATE_FAWBANK <<
|
|
DDR_SCH_ACTIVATE_FAWBANK_OFF)),
|
|
DDR_SCH_ACTIVATE);
|
|
|
|
/*
|
|
* Configuring timing values concerning device to device data bus
|
|
* ownership change
|
|
*/
|
|
ddr_sch_writel(plat, ((CALTIMING1_CFG_RD_TO_RD_DC(caltim1) <<
|
|
DDR_SCH_DEVTODEV_BUSRDTORD_OFF) |
|
|
(CALTIMING1_CFG_RD_TO_WR_DC(caltim1) <<
|
|
DDR_SCH_DEVTODEV_BUSRDTOWR_OFF) |
|
|
(CALTIMING3_CFG_WR_TO_RD_DC(caltim3) <<
|
|
DDR_SCH_DEVTODEV_BUSWRTORD_OFF)),
|
|
DDR_SCH_DEVTODEV);
|
|
|
|
/* assigning the SDRAM size */
|
|
unsigned long long size = sdram_calculate_size(plat);
|
|
/* If the size is invalid, use default Config size */
|
|
if (size <= 0)
|
|
hw_size = PHYS_SDRAM_1_SIZE;
|
|
else
|
|
hw_size = size;
|
|
|
|
/* Get bank configuration from devicetree */
|
|
ret = fdtdec_decode_ram_size(gd->fdt_blob, NULL, 0, NULL,
|
|
(phys_size_t *)&gd->ram_size, &bd);
|
|
if (ret) {
|
|
puts("DDR: Failed to decode memory node\n");
|
|
return -1;
|
|
}
|
|
|
|
if (gd->ram_size != hw_size)
|
|
printf("DDR: Warning: DRAM size from device tree mismatch with hardware.\n");
|
|
|
|
printf("DDR: %lld MiB\n", gd->ram_size >> 20);
|
|
|
|
/* Enable or disable the SDRAM ECC */
|
|
if (CTRLCFG1_CFG_CTRL_EN_ECC(ctrlcfg1)) {
|
|
setbits_le32(plat->hmc + ECCCTRL1,
|
|
(DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
DDR_HMC_ECCCTL_CNT_RST_SET_MSK |
|
|
DDR_HMC_ECCCTL_ECC_EN_SET_MSK));
|
|
clrbits_le32(plat->hmc + ECCCTRL1,
|
|
(DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
DDR_HMC_ECCCTL_CNT_RST_SET_MSK));
|
|
setbits_le32(plat->hmc + ECCCTRL2,
|
|
(DDR_HMC_ECCCTL2_RMW_EN_SET_MSK |
|
|
DDR_HMC_ECCCTL2_AWB_EN_SET_MSK));
|
|
hmc_ecc_writel(plat, DDR_HMC_ERRINTEN_INTMASK, ERRINTENS);
|
|
|
|
/* Initialize memory content if not from warm reset */
|
|
if (!cpu_has_been_warmreset())
|
|
sdram_init_ecc_bits(&bd);
|
|
} else {
|
|
clrbits_le32(plat->hmc + ECCCTRL1,
|
|
(DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
|
|
DDR_HMC_ECCCTL_CNT_RST_SET_MSK |
|
|
DDR_HMC_ECCCTL_ECC_EN_SET_MSK));
|
|
clrbits_le32(plat->hmc + ECCCTRL2,
|
|
(DDR_HMC_ECCCTL2_RMW_EN_SET_MSK |
|
|
DDR_HMC_ECCCTL2_AWB_EN_SET_MSK));
|
|
}
|
|
|
|
/* Enable non-secure reads/writes to HMC Adapter for SDRAM ECC */
|
|
writel(FW_HMC_ADAPTOR_MPU_MASK, FW_HMC_ADAPTOR_REG_ADDR);
|
|
|
|
sdram_size_check(&bd);
|
|
|
|
priv->info.base = bd.bi_dram[0].start;
|
|
priv->info.size = gd->ram_size;
|
|
|
|
debug("DDR: HMC init success\n");
|
|
return 0;
|
|
}
|
|
|