mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch adds the "nandecc" command to switch between the SPEAr600 internal 1-bit HW ECC and the 4-bit SW BCH4 ECC. This can be needed to support NAND chips with a stronger ECC than 1-bit, as on the x600. And to dynamically switch between both ECC schemes for backwards compatibility. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
259 lines
7.2 KiB
C
259 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _SPR_MISC_H
|
|
#define _SPR_MISC_H
|
|
|
|
struct misc_regs {
|
|
u32 auto_cfg_reg; /* 0x0 */
|
|
u32 armdbg_ctr_reg; /* 0x4 */
|
|
u32 pll1_cntl; /* 0x8 */
|
|
u32 pll1_frq; /* 0xc */
|
|
u32 pll1_mod; /* 0x10 */
|
|
u32 pll2_cntl; /* 0x14 */
|
|
u32 pll2_frq; /* 0x18 */
|
|
u32 pll2_mod; /* 0x1C */
|
|
u32 pll_ctr_reg; /* 0x20 */
|
|
u32 amba_clk_cfg; /* 0x24 */
|
|
u32 periph_clk_cfg; /* 0x28 */
|
|
u32 periph1_clken; /* 0x2C */
|
|
u32 soc_core_id; /* 0x30 */
|
|
u32 ras_clken; /* 0x34 */
|
|
u32 periph1_rst; /* 0x38 */
|
|
u32 periph2_rst; /* 0x3C */
|
|
u32 ras_rst; /* 0x40 */
|
|
u32 prsc1_clk_cfg; /* 0x44 */
|
|
u32 prsc2_clk_cfg; /* 0x48 */
|
|
u32 prsc3_clk_cfg; /* 0x4C */
|
|
u32 amem_cfg_ctrl; /* 0x50 */
|
|
u32 expi_clk_cfg; /* 0x54 */
|
|
u32 reserved_1; /* 0x58 */
|
|
u32 clcd_synth_clk; /* 0x5C */
|
|
u32 irda_synth_clk; /* 0x60 */
|
|
u32 uart_synth_clk; /* 0x64 */
|
|
u32 gmac_synth_clk; /* 0x68 */
|
|
u32 ras_synth1_clk; /* 0x6C */
|
|
u32 ras_synth2_clk; /* 0x70 */
|
|
u32 ras_synth3_clk; /* 0x74 */
|
|
u32 ras_synth4_clk; /* 0x78 */
|
|
u32 arb_icm_ml1; /* 0x7C */
|
|
u32 arb_icm_ml2; /* 0x80 */
|
|
u32 arb_icm_ml3; /* 0x84 */
|
|
u32 arb_icm_ml4; /* 0x88 */
|
|
u32 arb_icm_ml5; /* 0x8C */
|
|
u32 arb_icm_ml6; /* 0x90 */
|
|
u32 arb_icm_ml7; /* 0x94 */
|
|
u32 arb_icm_ml8; /* 0x98 */
|
|
u32 arb_icm_ml9; /* 0x9C */
|
|
u32 dma_src_sel; /* 0xA0 */
|
|
u32 uphy_ctr_reg; /* 0xA4 */
|
|
u32 gmac_ctr_reg; /* 0xA8 */
|
|
u32 port_bridge_ctrl; /* 0xAC */
|
|
u32 reserved_2[4]; /* 0xB0--0xBC */
|
|
u32 prc1_ilck_ctrl_reg; /* 0xC0 */
|
|
u32 prc2_ilck_ctrl_reg; /* 0xC4 */
|
|
u32 prc3_ilck_ctrl_reg; /* 0xC8 */
|
|
u32 prc4_ilck_ctrl_reg; /* 0xCC */
|
|
u32 prc1_intr_ctrl_reg; /* 0xD0 */
|
|
u32 prc2_intr_ctrl_reg; /* 0xD4 */
|
|
u32 prc3_intr_ctrl_reg; /* 0xD8 */
|
|
u32 prc4_intr_ctrl_reg; /* 0xDC */
|
|
u32 powerdown_cfg_reg; /* 0xE0 */
|
|
u32 ddr_1v8_compensation; /* 0xE4 */
|
|
u32 ddr_2v5_compensation; /* 0xE8 */
|
|
u32 core_3v3_compensation; /* 0xEC */
|
|
u32 ddr_pad; /* 0xF0 */
|
|
u32 bist1_ctr_reg; /* 0xF4 */
|
|
u32 bist2_ctr_reg; /* 0xF8 */
|
|
u32 bist3_ctr_reg; /* 0xFC */
|
|
u32 bist4_ctr_reg; /* 0x100 */
|
|
u32 bist5_ctr_reg; /* 0x104 */
|
|
u32 bist1_rslt_reg; /* 0x108 */
|
|
u32 bist2_rslt_reg; /* 0x10C */
|
|
u32 bist3_rslt_reg; /* 0x110 */
|
|
u32 bist4_rslt_reg; /* 0x114 */
|
|
u32 bist5_rslt_reg; /* 0x118 */
|
|
u32 syst_error_reg; /* 0x11C */
|
|
u32 reserved_3[0x1FB8]; /* 0x120--0x7FFC */
|
|
u32 ras_gpp1_in; /* 0x8000 */
|
|
u32 ras_gpp2_in; /* 0x8004 */
|
|
u32 ras_gpp1_out; /* 0x8008 */
|
|
u32 ras_gpp2_out; /* 0x800C */
|
|
};
|
|
|
|
/* SYNTH_CLK value*/
|
|
#define SYNTH23 0x00020003
|
|
|
|
/* PLLx_FRQ value */
|
|
#if defined(CONFIG_SPEAR3XX)
|
|
#define FREQ_332 0xA600010C
|
|
#define FREQ_266 0x8500010C
|
|
#elif defined(CONFIG_SPEAR600)
|
|
#define FREQ_332 0xA600010F
|
|
#define FREQ_266 0x8500010F
|
|
#endif
|
|
|
|
/* PLL_CTR_REG */
|
|
#define MEM_CLK_SEL_MSK 0x70000000
|
|
#define MEM_CLK_HCLK 0x00000000
|
|
#define MEM_CLK_2HCLK 0x10000000
|
|
#define MEM_CLK_PLL2 0x30000000
|
|
|
|
#define EXPI_CLK_CFG_LOW_COMPR 0x2000
|
|
#define EXPI_CLK_CFG_CLK_EN 0x0400
|
|
#define EXPI_CLK_CFG_RST 0x0200
|
|
#define EXPI_CLK_SYNT_EN 0x0010
|
|
#define EXPI_CLK_CFG_SEL_PLL2 0x0004
|
|
#define EXPI_CLK_CFG_INT_CLK_EN 0x0001
|
|
|
|
#define PLL2_CNTL_6UA 0x1c00
|
|
#define PLL2_CNTL_SAMPLE 0x0008
|
|
#define PLL2_CNTL_ENABLE 0x0004
|
|
#define PLL2_CNTL_RESETN 0x0002
|
|
#define PLL2_CNTL_LOCK 0x0001
|
|
|
|
/* AUTO_CFG_REG value */
|
|
#define MISC_SOCCFGMSK 0x0000003F
|
|
#define MISC_SOCCFG30 0x0000000C
|
|
#define MISC_SOCCFG31 0x0000000D
|
|
#define MISC_NANDDIS 0x00020000
|
|
|
|
/* PERIPH_CLK_CFG value */
|
|
#define MISC_GPT3SYNTH 0x00000400
|
|
#define MISC_GPT4SYNTH 0x00000800
|
|
#define CONFIG_SPEAR_UART48M 0
|
|
#define CONFIG_SPEAR_UARTCLKMSK (0x1 << 4)
|
|
|
|
/* PRSC_CLK_CFG value */
|
|
/*
|
|
* Fout = Fin / (2^(N+1) * (M + 1))
|
|
*/
|
|
#define MISC_PRSC_N_1 0x00001000
|
|
#define MISC_PRSC_M_9 0x00000009
|
|
#define MISC_PRSC_N_4 0x00004000
|
|
#define MISC_PRSC_M_399 0x0000018F
|
|
#define MISC_PRSC_N_6 0x00006000
|
|
#define MISC_PRSC_M_2593 0x00000A21
|
|
#define MISC_PRSC_M_124 0x0000007C
|
|
#define MISC_PRSC_CFG (MISC_PRSC_N_1 | MISC_PRSC_M_9)
|
|
|
|
/* PERIPH1_CLKEN, PERIPH1_RST value */
|
|
#define MISC_USBDENB 0x01000000
|
|
#define MISC_ETHENB 0x00800000
|
|
#define MISC_SMIENB 0x00200000
|
|
#define MISC_GPT3ENB 0x00010000
|
|
#define MISC_GPIO4ENB 0x00002000
|
|
#define MISC_GPT2ENB 0x00000800
|
|
#define MISC_FSMCENB 0x00000200
|
|
#define MISC_I2CENB 0x00000080
|
|
#define MISC_SSP2ENB 0x00000070
|
|
#define MISC_UART0ENB 0x00000008
|
|
|
|
/* PERIPH_CLK_CFG */
|
|
#define XTALTIMEEN 0x00000001
|
|
#define PLLTIMEEN 0x00000002
|
|
#define CLCDCLK_SYNTH 0x00000000
|
|
#define CLCDCLK_48MHZ 0x00000004
|
|
#define CLCDCLK_EXT 0x00000008
|
|
#define UARTCLK_MASK (0x1 << 4)
|
|
#define UARTCLK_48MHZ 0x00000000
|
|
#define UARTCLK_SYNTH 0x00000010
|
|
#define IRDACLK_48MHZ 0x00000000
|
|
#define IRDACLK_SYNTH 0x00000020
|
|
#define IRDACLK_EXT 0x00000040
|
|
#define RTC_DISABLE 0x00000080
|
|
#define GPT1CLK_48MHZ 0x00000000
|
|
#define GPT1CLK_SYNTH 0x00000100
|
|
#define GPT2CLK_48MHZ 0x00000000
|
|
#define GPT2CLK_SYNTH 0x00000200
|
|
#define GPT3CLK_48MHZ 0x00000000
|
|
#define GPT3CLK_SYNTH 0x00000400
|
|
#define GPT4CLK_48MHZ 0x00000000
|
|
#define GPT4CLK_SYNTH 0x00000800
|
|
#define GPT5CLK_48MHZ 0x00000000
|
|
#define GPT5CLK_SYNTH 0x00001000
|
|
#define GPT1_FREEZE 0x00002000
|
|
#define GPT2_FREEZE 0x00004000
|
|
#define GPT3_FREEZE 0x00008000
|
|
#define GPT4_FREEZE 0x00010000
|
|
#define GPT5_FREEZE 0x00020000
|
|
|
|
/* PERIPH1_CLKEN bits */
|
|
#define PERIPH_ARM1_WE 0x00000001
|
|
#define PERIPH_ARM1 0x00000002
|
|
#define PERIPH_ARM2 0x00000004
|
|
#define PERIPH_UART1 0x00000008
|
|
#define PERIPH_UART2 0x00000010
|
|
#define PERIPH_SSP1 0x00000020
|
|
#define PERIPH_SSP2 0x00000040
|
|
#define PERIPH_I2C 0x00000080
|
|
#define PERIPH_JPEG 0x00000100
|
|
#define PERIPH_FSMC 0x00000200
|
|
#define PERIPH_FIRDA 0x00000400
|
|
#define PERIPH_GPT4 0x00000800
|
|
#define PERIPH_GPT5 0x00001000
|
|
#define PERIPH_GPIO4 0x00002000
|
|
#define PERIPH_SSP3 0x00004000
|
|
#define PERIPH_ADC 0x00008000
|
|
#define PERIPH_GPT3 0x00010000
|
|
#define PERIPH_RTC 0x00020000
|
|
#define PERIPH_GPIO3 0x00040000
|
|
#define PERIPH_DMA 0x00080000
|
|
#define PERIPH_ROM 0x00100000
|
|
#define PERIPH_SMI 0x00200000
|
|
#define PERIPH_CLCD 0x00400000
|
|
#define PERIPH_GMAC 0x00800000
|
|
#define PERIPH_USBD 0x01000000
|
|
#define PERIPH_USBH1 0x02000000
|
|
#define PERIPH_USBH2 0x04000000
|
|
#define PERIPH_MPMC 0x08000000
|
|
#define PERIPH_RAMW 0x10000000
|
|
#define PERIPH_MPMC_EN 0x20000000
|
|
#define PERIPH_MPMC_WE 0x40000000
|
|
#define PERIPH_MPMCMSK 0x60000000
|
|
|
|
#define PERIPH_CLK_ALL 0x0FFFFFF8
|
|
#define PERIPH_RST_ALL 0x00000004
|
|
|
|
/* DDR_PAD values */
|
|
#define DDR_PAD_CNF_MSK 0x0000ffff
|
|
#define DDR_PAD_SW_CONF 0x00060000
|
|
#define DDR_PAD_SSTL_SEL 0x00000001
|
|
#define DDR_PAD_DRAM_TYPE 0x00008000
|
|
|
|
/* DDR_COMP values */
|
|
#define DDR_COMP_ACCURATE 0x00000010
|
|
|
|
/* SoC revision stuff */
|
|
#define SOC_PRI_SHFT 16
|
|
#define SOC_SEC_SHFT 8
|
|
|
|
/* Revision definitions */
|
|
#define SOC_SPEAR_NA 0
|
|
|
|
/*
|
|
* The definitons have started from
|
|
* 101 for SPEAr6xx
|
|
* 201 for SPEAr3xx
|
|
* 301 for SPEAr13xx
|
|
*/
|
|
#define SOC_SPEAR600_AA 101
|
|
#define SOC_SPEAR600_AB 102
|
|
#define SOC_SPEAR600_BA 103
|
|
#define SOC_SPEAR600_BB 104
|
|
#define SOC_SPEAR600_BC 105
|
|
#define SOC_SPEAR600_BD 106
|
|
|
|
#define SOC_SPEAR300 201
|
|
#define SOC_SPEAR310 202
|
|
#define SOC_SPEAR320 203
|
|
|
|
extern int get_socrev(void);
|
|
int fsmc_nand_switch_ecc(uint32_t eccstrength);
|
|
|
|
#endif
|