mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-06 04:43:21 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
201 lines
7.3 KiB
C
201 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* DDR controller configuration for the i.MX7 architecture
|
|
*
|
|
* (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
|
|
*
|
|
* Author: Uri Mashiach <uri.mashiach@compulab.co.il>
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/mx7-ddr.h>
|
|
#include <common.h>
|
|
|
|
/*
|
|
* Routine: mx7_dram_cfg
|
|
* Description: DDR controller configuration
|
|
*
|
|
* @ddrc_regs_val: DDRC registers value
|
|
* @ddrc_mp_val: DDRC_MP registers value
|
|
* @ddr_phy_regs_val: DDR_PHY registers value
|
|
* @calib_param: calibration parameters
|
|
*
|
|
*/
|
|
void mx7_dram_cfg(struct ddrc *ddrc_regs_val, struct ddrc_mp *ddrc_mp_val,
|
|
struct ddr_phy *ddr_phy_regs_val,
|
|
struct mx7_calibration *calib_param)
|
|
{
|
|
struct src *const src_regs = (struct src *)SRC_BASE_ADDR;
|
|
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
|
|
struct ddrc_mp *const ddrc_mp_reg = (struct ddrc_mp *)DDRC_MP_BASE_ADDR;
|
|
struct ddr_phy *const ddr_phy_regs =
|
|
(struct ddr_phy *)DDRPHY_IPS_BASE_ADDR;
|
|
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs =
|
|
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
|
|
int i;
|
|
|
|
/* Assert DDR Controller preset and DDR PHY reset */
|
|
writel(SRC_DDRC_RCR_DDRC_CORE_RST_MASK, &src_regs->ddrc_rcr);
|
|
|
|
/* DDR controller configuration */
|
|
writel(ddrc_regs_val->mstr, &ddrc_regs->mstr);
|
|
writel(ddrc_regs_val->rfshtmg, &ddrc_regs->rfshtmg);
|
|
writel(ddrc_mp_val->pctrl_0, &ddrc_mp_reg->pctrl_0);
|
|
writel(ddrc_regs_val->init1, &ddrc_regs->init1);
|
|
writel(ddrc_regs_val->init0, &ddrc_regs->init0);
|
|
writel(ddrc_regs_val->init3, &ddrc_regs->init3);
|
|
writel(ddrc_regs_val->init4, &ddrc_regs->init4);
|
|
writel(ddrc_regs_val->init5, &ddrc_regs->init5);
|
|
writel(ddrc_regs_val->rankctl, &ddrc_regs->rankctl);
|
|
writel(ddrc_regs_val->dramtmg0, &ddrc_regs->dramtmg0);
|
|
writel(ddrc_regs_val->dramtmg1, &ddrc_regs->dramtmg1);
|
|
writel(ddrc_regs_val->dramtmg2, &ddrc_regs->dramtmg2);
|
|
writel(ddrc_regs_val->dramtmg3, &ddrc_regs->dramtmg3);
|
|
writel(ddrc_regs_val->dramtmg4, &ddrc_regs->dramtmg4);
|
|
writel(ddrc_regs_val->dramtmg5, &ddrc_regs->dramtmg5);
|
|
writel(ddrc_regs_val->dramtmg8, &ddrc_regs->dramtmg8);
|
|
writel(ddrc_regs_val->zqctl0, &ddrc_regs->zqctl0);
|
|
writel(ddrc_regs_val->dfitmg0, &ddrc_regs->dfitmg0);
|
|
writel(ddrc_regs_val->dfitmg1, &ddrc_regs->dfitmg1);
|
|
writel(ddrc_regs_val->dfiupd0, &ddrc_regs->dfiupd0);
|
|
writel(ddrc_regs_val->dfiupd1, &ddrc_regs->dfiupd1);
|
|
writel(ddrc_regs_val->dfiupd2, &ddrc_regs->dfiupd2);
|
|
writel(ddrc_regs_val->addrmap0, &ddrc_regs->addrmap0);
|
|
writel(ddrc_regs_val->addrmap1, &ddrc_regs->addrmap1);
|
|
writel(ddrc_regs_val->addrmap4, &ddrc_regs->addrmap4);
|
|
writel(ddrc_regs_val->addrmap5, &ddrc_regs->addrmap5);
|
|
writel(ddrc_regs_val->addrmap6, &ddrc_regs->addrmap6);
|
|
writel(ddrc_regs_val->odtcfg, &ddrc_regs->odtcfg);
|
|
writel(ddrc_regs_val->odtmap, &ddrc_regs->odtmap);
|
|
|
|
/* De-assert DDR Controller preset and DDR PHY reset */
|
|
clrbits_le32(&src_regs->ddrc_rcr, SRC_DDRC_RCR_DDRC_CORE_RST_MASK);
|
|
|
|
/* PHY configuration */
|
|
writel(ddr_phy_regs_val->phy_con0, &ddr_phy_regs->phy_con0);
|
|
writel(ddr_phy_regs_val->phy_con1, &ddr_phy_regs->phy_con1);
|
|
writel(ddr_phy_regs_val->phy_con4, &ddr_phy_regs->phy_con4);
|
|
writel(ddr_phy_regs_val->mdll_con0, &ddr_phy_regs->mdll_con0);
|
|
writel(ddr_phy_regs_val->drvds_con0, &ddr_phy_regs->drvds_con0);
|
|
writel(ddr_phy_regs_val->offset_wr_con0, &ddr_phy_regs->offset_wr_con0);
|
|
writel(ddr_phy_regs_val->offset_rd_con0, &ddr_phy_regs->offset_rd_con0);
|
|
writel(ddr_phy_regs_val->cmd_sdll_con0 |
|
|
DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
|
|
&ddr_phy_regs->cmd_sdll_con0);
|
|
writel(ddr_phy_regs_val->cmd_sdll_con0 &
|
|
~DDR_PHY_CMD_SDLL_CON0_CTRL_RESYNC_MASK,
|
|
&ddr_phy_regs->cmd_sdll_con0);
|
|
writel(ddr_phy_regs_val->offset_lp_con0, &ddr_phy_regs->offset_lp_con0);
|
|
|
|
/* calibration */
|
|
for (i = 0; i < calib_param->num_val; i++)
|
|
writel(calib_param->values[i], &ddr_phy_regs->zq_con0);
|
|
|
|
/* Wake_up DDR PHY */
|
|
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_N_N);
|
|
writel(IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(0xf) |
|
|
IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK,
|
|
&iomuxc_gpr_regs->gpr[8]);
|
|
HW_CCM_CCGR_WR(CCGR_IDX_DDR, CCM_CLK_ON_R_W);
|
|
}
|
|
|
|
/*
|
|
* Routine: imx_ddr_size
|
|
* Description: extract the current DRAM size from the DDRC registers
|
|
*
|
|
* @return: DRAM size
|
|
*/
|
|
unsigned int imx_ddr_size(void)
|
|
{
|
|
struct ddrc *const ddrc_regs = (struct ddrc *)DDRC_IPS_BASE_ADDR;
|
|
u32 reg_val, field_val;
|
|
int bits = 0;/* Number of address bits */
|
|
|
|
/* Count data bus width bits */
|
|
reg_val = readl(&ddrc_regs->mstr);
|
|
field_val = (reg_val & MSTR_DATA_BUS_WIDTH_MASK) >> MSTR_DATA_BUS_WIDTH_SHIFT;
|
|
bits += 2 - field_val;
|
|
/* Count rank address bits */
|
|
field_val = (reg_val & MSTR_DATA_ACTIVE_RANKS_MASK) >> MSTR_DATA_ACTIVE_RANKS_SHIFT;
|
|
if (field_val > 1)
|
|
bits += field_val - 1;
|
|
/* Count column address bits */
|
|
bits += 2;/* Column address 0 and 1 are fixed mapped */
|
|
reg_val = readl(&ddrc_regs->addrmap2);
|
|
field_val = (reg_val & ADDRMAP2_COL_B2_MASK) >> ADDRMAP2_COL_B2_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP2_COL_B3_MASK) >> ADDRMAP2_COL_B3_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP2_COL_B4_MASK) >> ADDRMAP2_COL_B4_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP2_COL_B5_MASK) >> ADDRMAP2_COL_B5_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
reg_val = readl(&ddrc_regs->addrmap3);
|
|
field_val = (reg_val & ADDRMAP3_COL_B6_MASK) >> ADDRMAP3_COL_B6_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP3_COL_B7_MASK) >> ADDRMAP3_COL_B7_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP3_COL_B8_MASK) >> ADDRMAP3_COL_B8_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP3_COL_B9_MASK) >> ADDRMAP3_COL_B9_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
reg_val = readl(&ddrc_regs->addrmap4);
|
|
field_val = (reg_val & ADDRMAP4_COL_B10_MASK) >> ADDRMAP4_COL_B10_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP4_COL_B11_MASK) >> ADDRMAP4_COL_B11_SHIFT;
|
|
if (field_val <= 7)
|
|
bits++;
|
|
/* Count row address bits */
|
|
reg_val = readl(&ddrc_regs->addrmap5);
|
|
field_val = (reg_val & ADDRMAP5_ROW_B0_MASK) >> ADDRMAP5_ROW_B0_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP5_ROW_B1_MASK) >> ADDRMAP5_ROW_B1_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP5_ROW_B2_10_MASK) >> ADDRMAP5_ROW_B2_10_SHIFT;
|
|
if (field_val <= 11)
|
|
bits += 9;
|
|
field_val = (reg_val & ADDRMAP5_ROW_B11_MASK) >> ADDRMAP5_ROW_B11_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
reg_val = readl(&ddrc_regs->addrmap6);
|
|
field_val = (reg_val & ADDRMAP6_ROW_B12_MASK) >> ADDRMAP6_ROW_B12_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP6_ROW_B13_MASK) >> ADDRMAP6_ROW_B13_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP6_ROW_B14_MASK) >> ADDRMAP6_ROW_B14_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP6_ROW_B15_MASK) >> ADDRMAP6_ROW_B15_SHIFT;
|
|
if (field_val <= 11)
|
|
bits++;
|
|
/* Count bank bits */
|
|
reg_val = readl(&ddrc_regs->addrmap1);
|
|
field_val = (reg_val & ADDRMAP1_BANK_B0_MASK) >> ADDRMAP1_BANK_B0_SHIFT;
|
|
if (field_val <= 30)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP1_BANK_B1_MASK) >> ADDRMAP1_BANK_B1_SHIFT;
|
|
if (field_val <= 30)
|
|
bits++;
|
|
field_val = (reg_val & ADDRMAP1_BANK_B2_MASK) >> ADDRMAP1_BANK_B2_SHIFT;
|
|
if (field_val <= 29)
|
|
bits++;
|
|
|
|
return 1 << bits;
|
|
}
|