mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
64413e1b7c
This patch adds Microchip MPFS Icicle Kit support. For now, only NS16550 Serial, Microchip clock, Cadence eMMC and MACB drivers are enabled. The Microchip MPFS Icicle defconfig by default builds U-Boot for S-Mode because U-Boot on Microchip PolarFire SoC will run in S-Mode as payload of HSS + OpenSBI. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
125 lines
2.8 KiB
C
125 lines
2.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019 Microchip Technology Inc.
|
|
* Padmarao Begari <padmarao.begari@microchip.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <init.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define MPFS_SYSREG_SOFT_RESET ((unsigned int *)0x20002088)
|
|
#define MPFS_SYS_SERVICE_CR ((unsigned int *)0x37020050)
|
|
#define MPFS_SYS_SERVICE_SR ((unsigned int *)0x37020054)
|
|
#define MPFS_SYS_SERVICE_MAILBOX ((unsigned char *)0x37020800)
|
|
|
|
#define PERIPH_RESET_VALUE 0x1e8u
|
|
#define SERVICE_CR_REQ 0x1u
|
|
#define SERVICE_SR_BUSY 0x2u
|
|
|
|
static void read_device_serial_number(u8 *response, u8 response_size)
|
|
{
|
|
u8 idx;
|
|
u8 *response_buf;
|
|
unsigned int val;
|
|
|
|
response_buf = (u8 *)response;
|
|
|
|
writel(SERVICE_CR_REQ, MPFS_SYS_SERVICE_CR);
|
|
/*
|
|
* REQ bit will remain set till the system controller starts
|
|
* processing.
|
|
*/
|
|
do {
|
|
val = readl(MPFS_SYS_SERVICE_CR);
|
|
} while (SERVICE_CR_REQ == (val & SERVICE_CR_REQ));
|
|
|
|
/*
|
|
* Once system controller starts processing the busy bit will
|
|
* go high and service is completed when busy bit is gone low
|
|
*/
|
|
do {
|
|
val = readl(MPFS_SYS_SERVICE_SR);
|
|
} while (SERVICE_SR_BUSY == (val & SERVICE_SR_BUSY));
|
|
|
|
for (idx = 0; idx < response_size; idx++)
|
|
response_buf[idx] = readb(MPFS_SYS_SERVICE_MAILBOX + idx);
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* For now nothing to do here. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* Reset uart, mmc peripheral */
|
|
val = readl(MPFS_SYSREG_SOFT_RESET);
|
|
val = (val & ~(PERIPH_RESET_VALUE));
|
|
writel(val, MPFS_SYSREG_SOFT_RESET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u32 ret;
|
|
u32 node;
|
|
u8 idx;
|
|
u8 device_serial_number[16] = { 0 };
|
|
unsigned char mac_addr[6];
|
|
char icicle_mac_addr[20];
|
|
void *blob = (void *)gd->fdt_blob;
|
|
|
|
node = fdt_path_offset(blob, "ethernet0");
|
|
if (node < 0) {
|
|
printf("No ethernet0 path offset\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6);
|
|
if (ret) {
|
|
printf("No local-mac-address property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_device_serial_number(device_serial_number, 16);
|
|
|
|
/* Update MAC address with device serial number */
|
|
mac_addr[0] = 0x00;
|
|
mac_addr[1] = 0x04;
|
|
mac_addr[2] = 0xA3;
|
|
mac_addr[3] = device_serial_number[2];
|
|
mac_addr[4] = device_serial_number[1];
|
|
mac_addr[5] = device_serial_number[0];
|
|
|
|
ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
|
|
if (ret) {
|
|
printf("Error setting local-mac-address property\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
icicle_mac_addr[0] = '[';
|
|
|
|
sprintf(&icicle_mac_addr[1], "%pM", mac_addr);
|
|
|
|
icicle_mac_addr[18] = ']';
|
|
icicle_mac_addr[19] = '\0';
|
|
|
|
for (idx = 0; idx < 20; idx++) {
|
|
if (icicle_mac_addr[idx] == ':')
|
|
icicle_mac_addr[idx] = ' ';
|
|
}
|
|
env_set("icicle_mac_addr", icicle_mac_addr);
|
|
|
|
return 0;
|
|
}
|