Phil Edworthy 622bad103b armv7m: Add SysTick timer driver ... The SysTick is a 24-bit down counter that is found on all ARM Cortex M3, M4, M7 devices and is always located at a fixed address. The number of reference clock ticks that correspond to 10ms is normally defined in the SysTick Calibration register's TENMS field. However, on some devices this is wrong, so this driver allows the clock rate to be defined using CONFIG_SYS_HZ_CLOCK. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com>		2017-03-14 20:40:18 -04:00
..
cpu	armv7m: Add SysTick timer driver	2017-03-14 20:40:18 -04:00
dts	ARM: dts: uniphier: more re-sync DT with Linux	2017-03-14 05:52:53 +09:00
imx-common	Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs	2017-03-09 11:37:24 -05:00
include	arm: omap3: Bring back ARM errata workaround 725233	2017-03-14 20:40:17 -04:00
lib	do_smhload: fix return code	2017-03-09 19:52:14 -05:00
mach-aspeed	dm: core: Replace of_offset with accessor	2017-02-08 06:12:14 -07:00
mach-at91	Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig	2017-01-25 17:38:32 -05:00
mach-bcm283x	ARM: bcm283x: Implement EFI RTS reset_system	2016-11-28 20:15:19 -05:00
mach-davinci	Kconfig: Migrate BOARD_LATE_INIT to a select	2017-01-24 10:35:54 -05:00
mach-exynos	ARM: Migrate errata to Kconfig	2017-03-09 19:52:50 -05:00
mach-highbank	ARM: highbank: move SoC sources to mach-highbank	2015-02-21 08:23:51 -05:00
mach-integrator	integrator: switch to DM serial port	2015-08-12 20:47:49 -04:00
mach-keystone	ARM: K2G: DDR3: Fix up priv ID for MPU	2016-12-03 13:21:10 -05:00
mach-kirkwood	Kconfig: Migrate BOARD_LATE_INIT to a select	2017-01-24 10:35:54 -05:00
mach-meson	arm: Disable HVC PSCI calls by default	2016-10-18 09:08:08 +02:00
mach-mvebu	arm: mvebu: Implement secure boot	2017-02-01 09:04:18 +01:00
mach-omap2	arm: omap3: Bring back ARM errata workaround 725233	2017-03-14 20:40:17 -04:00
mach-orion5x	Use correct spelling of "U-Boot"	2016-02-06 12:00:59 +01:00
mach-rmobile	armv8: aarch64: Fix the warning about x1-x3 nonzero issue	2017-01-18 09:29:33 -08:00
mach-rockchip	rockchip: rename miniarm to tinker board	2017-02-09 12:10:59 -07:00
mach-s5pc1xx	arm: s5pc1xx: move SoC to mach-s5pc1xx	2015-11-30 17:17:01 +09:00
mach-snapdragon	drivers/sysreset: group sysreset drivers	2016-08-12 09:22:17 -04:00
mach-socfpga	SPL: add support to boot from a partition type	2017-02-17 14:15:14 -05:00
mach-stm32	ARM: SPI: stm32: add stm32f746 qspi driver	2017-01-28 14:04:50 -05:00
mach-sunxi	sunxi: A64: enable SPL	2017-01-04 16:37:43 +01:00
mach-tegra	ARM: Migrate errata to Kconfig	2017-03-09 19:52:50 -05:00
mach-uniphier	ARM: uniphier: set DRAM_SPARSE flag for LD21 boards	2017-03-14 04:15:24 +09:00
mach-versatile	arm: Remove versatileab board	2015-09-11 15:01:25 -04:00
mach-zynq	mmc: zynq: rename CONFIG_ZYNQ_SDHCI to CONFIG_MMC_SDHCI_ZYNQ	2017-01-31 21:50:47 +09:00
thumb1/include/asm/proc-armv	arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD	2015-11-10 15:03:48 +01:00
config.mk	ARMv8: Add secure sections for PSCI text and data	2016-12-15 11:57:25 -08:00
Kconfig	arm: omap3: Bring back ARM errata workaround 725233	2017-03-14 20:40:17 -04:00
Kconfig.debug	arm: debug: add Kconfig entries for lowlevel debug	2014-10-26 22:23:12 +01:00
Makefile	Merge branch 'master' of git://www.denx.de/git/u-boot-imx	2017-02-01 16:34:25 -05:00