mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 05:48:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
928 lines
29 KiB
C
928 lines
29 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* QorIQ RDB boards configuration file
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#if defined(CONFIG_TARGET_P1020MBG)
|
|
#define CONFIG_BOARDNAME "P1020MBG-PC"
|
|
#define CONFIG_VSC7385_ENET
|
|
#define CONFIG_SLIC
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0xe4
|
|
#define __SW_BOOT_SD 0x54
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1020UTM)
|
|
#define CONFIG_BOARDNAME "P1020UTM-PC"
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0xe0
|
|
#define __SW_BOOT_SD 0x50
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1020RDB_PC)
|
|
#define CONFIG_BOARDNAME "P1020RDB-PC"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_VSC7385_ENET
|
|
#define CONFIG_SLIC
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0x5c
|
|
#define __SW_BOOT_SPI 0x1c
|
|
#define __SW_BOOT_SD 0x9c
|
|
#define __SW_BOOT_NAND 0xec
|
|
#define __SW_BOOT_PCIE 0x6c
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#endif
|
|
|
|
/*
|
|
* P1020RDB-PD board has user selectable switches for evaluating different
|
|
* frequency and boot options for the P1020 device. The table that
|
|
* follow describe the available options. The front six binary number was in
|
|
* accordance with SW3[1:6].
|
|
* 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
|
|
* 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
|
|
* 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
|
|
* 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
|
|
* 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
|
|
* 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
|
|
* 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
|
|
*/
|
|
#if defined(CONFIG_TARGET_P1020RDB_PD)
|
|
#define CONFIG_BOARDNAME "P1020RDB-PD"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_VSC7385_ENET
|
|
#define CONFIG_SLIC
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0x64
|
|
#define __SW_BOOT_SPI 0x34
|
|
#define __SW_BOOT_SD 0x24
|
|
#define __SW_BOOT_NAND 0x44
|
|
#define __SW_BOOT_PCIE 0x74
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
/*
|
|
* Dynamic MTD Partition support with mtdparts
|
|
*/
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1021RDB)
|
|
#define CONFIG_BOARDNAME "P1021RDB-PC"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_QE
|
|
#define CONFIG_VSC7385_ENET
|
|
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
|
|
addresses in the LBC */
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0x5c
|
|
#define __SW_BOOT_SPI 0x1c
|
|
#define __SW_BOOT_SD 0x9c
|
|
#define __SW_BOOT_NAND 0xec
|
|
#define __SW_BOOT_PCIE 0x6c
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
/*
|
|
* Dynamic MTD Partition support with mtdparts
|
|
*/
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1024RDB)
|
|
#define CONFIG_BOARDNAME "P1024RDB"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_SLIC
|
|
#define __SW_BOOT_MASK 0xf3
|
|
#define __SW_BOOT_NOR 0x00
|
|
#define __SW_BOOT_SPI 0x08
|
|
#define __SW_BOOT_SD 0x04
|
|
#define __SW_BOOT_NAND 0x0c
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1025RDB)
|
|
#define CONFIG_BOARDNAME "P1025RDB"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_QE
|
|
#define CONFIG_SLIC
|
|
|
|
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
|
|
addresses in the LBC */
|
|
#define __SW_BOOT_MASK 0xf3
|
|
#define __SW_BOOT_NOR 0x00
|
|
#define __SW_BOOT_SPI 0x08
|
|
#define __SW_BOOT_SD 0x04
|
|
#define __SW_BOOT_NAND 0x0c
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P2020RDB)
|
|
#define CONFIG_BOARDNAME "P2020RDB-PC"
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_VSC7385_ENET
|
|
#define __SW_BOOT_MASK 0x03
|
|
#define __SW_BOOT_NOR 0xc8
|
|
#define __SW_BOOT_SPI 0x28
|
|
#define __SW_BOOT_SD 0x68 /* or 0x18 */
|
|
#define __SW_BOOT_NAND 0xe8
|
|
#define __SW_BOOT_PCIE 0xa8
|
|
#define CONFIG_SYS_L2_SIZE (512 << 10)
|
|
/*
|
|
* Dynamic MTD Partition support with mtdparts
|
|
*/
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#endif
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
|
|
#define CONFIG_SPL_PAD_TO 0x20000
|
|
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
|
|
#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10)
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
|
|
#define CONFIG_SPL_MMC_BOOT
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPIFLASH
|
|
#define CONFIG_SPL_SPI_FLASH_MINIMAL
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
|
|
#define CONFIG_SPL_PAD_TO 0x20000
|
|
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10)
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
|
|
#define CONFIG_SPL_SPI_BOOT
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_SPL_NAND_BOOT
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_NAND_INIT
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#define CONFIG_SPL_MAX_SIZE (128 << 10)
|
|
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
|
|
#elif defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SPL_INIT_MINIMAL
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0xff800000
|
|
#define CONFIG_SPL_MAX_SIZE 4096
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
|
|
#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10)
|
|
#endif /* not CONFIG_TPL_BUILD */
|
|
|
|
#define CONFIG_SPL_PAD_TO 0x20000
|
|
#define CONFIG_TPL_PAD_TO 0x20000
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
|
|
#endif
|
|
|
|
#ifndef CONFIG_RESET_VECTOR_ADDRESS
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_MONITOR_BASE
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_MP
|
|
|
|
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
|
|
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
|
|
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
|
|
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
|
|
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
|
#define CONFIG_LBA48
|
|
|
|
#if defined(CONFIG_TARGET_P2020RDB)
|
|
#define CONFIG_SYS_CLK_FREQ 100000000
|
|
#else
|
|
#define CONFIG_SYS_CLK_FREQ 66666666
|
|
#endif
|
|
#define CONFIG_DDR_CLK_FREQ 66666666
|
|
|
|
#define CONFIG_HWCONFIG
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE
|
|
#define CONFIG_BTB
|
|
|
|
#define CONFIG_ENABLE_36BIT_PHYS
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_ADDR_MAP 1
|
|
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x1fffffff
|
|
|
|
#define CONFIG_SYS_CCSRBAR 0xffe00000
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
|
|
|
|
/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
|
|
SPL code*/
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
|
|
#endif
|
|
|
|
/* DDR Setup */
|
|
#define CONFIG_SYS_DDR_RAW_TIMING
|
|
#define CONFIG_DDR_SPD
|
|
#define CONFIG_SYS_SPD_BUS_NUM 1
|
|
#define SPD_EEPROM_ADDRESS 0x52
|
|
#undef CONFIG_FSL_DDR_INTERACTIVE
|
|
|
|
#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
|
|
#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
|
#else
|
|
#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
|
|
#endif
|
|
#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
|
|
|
/* Default settings for DDR3 */
|
|
#ifndef CONFIG_TARGET_P2020RDB
|
|
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
|
|
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
|
|
#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
|
|
#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
|
|
#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
|
|
#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
|
|
|
|
#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
|
|
#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
|
|
#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
|
|
#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
|
|
|
|
#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
|
|
#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
|
|
#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
|
|
#define CONFIG_SYS_DDR_RCW_1 0x00000000
|
|
#define CONFIG_SYS_DDR_RCW_2 0x00000000
|
|
#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
|
|
#define CONFIG_SYS_DDR_CONTROL_2 0x04401050
|
|
#define CONFIG_SYS_DDR_TIMING_4 0x00220001
|
|
#define CONFIG_SYS_DDR_TIMING_5 0x03402400
|
|
|
|
#define CONFIG_SYS_DDR_TIMING_3 0x00020000
|
|
#define CONFIG_SYS_DDR_TIMING_0 0x00330004
|
|
#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
|
|
#define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
|
|
#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
|
|
#define CONFIG_SYS_DDR_MODE_1 0x40461520
|
|
#define CONFIG_SYS_DDR_MODE_2 0x8000c000
|
|
#define CONFIG_SYS_DDR_INTERVAL 0x0C300000
|
|
#endif
|
|
|
|
#undef CONFIG_CLOCKS_IN_MHZ
|
|
|
|
/*
|
|
* Memory map
|
|
*
|
|
* 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
|
|
* 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3)
|
|
* 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
|
|
* 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable
|
|
* (early boot only)
|
|
* 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0
|
|
* 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2
|
|
* 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3
|
|
* 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2
|
|
* 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
|
|
* 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
|
|
* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
|
|
*/
|
|
|
|
/*
|
|
* Local Bus Definitions
|
|
*/
|
|
#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
|
|
#define CONFIG_SYS_FLASH_BASE 0xec000000
|
|
#elif defined(CONFIG_TARGET_P1020UTM)
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
|
|
#define CONFIG_SYS_FLASH_BASE 0xee000000
|
|
#else
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */
|
|
#define CONFIG_SYS_FLASH_BASE 0xef000000
|
|
#endif
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
|
|
#else
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
|
|
#endif
|
|
|
|
#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
|
|
| BR_PS_16 | BR_V)
|
|
|
|
#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
|
|
|
#undef CONFIG_SYS_FLASH_CHECKSUM
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
/* Nand Flash */
|
|
#ifdef CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_SYS_NAND_BASE 0xff800000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
|
|
#else
|
|
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#if defined(CONFIG_TARGET_P1020RDB_PD)
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#else
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
|
| BR_MS_FCM /* MSEL = FCM */ \
|
|
| BR_V) /* valid */
|
|
#if defined(CONFIG_TARGET_P1020RDB_PD)
|
|
#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \
|
|
| OR_FCM_PGS /* Large Page*/ \
|
|
| OR_FCM_CSCT \
|
|
| OR_FCM_CST \
|
|
| OR_FCM_CHT \
|
|
| OR_FCM_SCY_1 \
|
|
| OR_FCM_TRLX \
|
|
| OR_FCM_EHTR)
|
|
#else
|
|
#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \
|
|
| OR_FCM_CSCT \
|
|
| OR_FCM_CST \
|
|
| OR_FCM_CHT \
|
|
| OR_FCM_SCY_1 \
|
|
| OR_FCM_TRLX \
|
|
| OR_FCM_EHTR)
|
|
#endif
|
|
#endif /* CONFIG_NAND_FSL_ELBC */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
|
|
/* The assembler doesn't like typecast */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
|
|
((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
|
|
CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
|
|
#else
|
|
/* Initial L1 address */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
|
|
#endif
|
|
/* Size of used area in RAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
|
|
|
|
#define CONFIG_SYS_CPLD_BASE 0xffa00000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull
|
|
#else
|
|
#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
|
|
#endif
|
|
/* CPLD config size: 1Mb */
|
|
#define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
|
|
BR_PS_8 | BR_V)
|
|
#define CONFIG_CPLD_OR_PRELIM (0xfff009f7)
|
|
|
|
#define CONFIG_SYS_PMC_BASE 0xff980000
|
|
#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
|
|
#define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
|
|
BR_PS_8 | BR_V)
|
|
#define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
|
|
OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
|
|
OR_GPCM_EAD)
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
|
|
#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
|
|
#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
|
|
#else
|
|
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
|
|
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
|
|
#ifdef CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
|
|
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
#endif
|
|
#endif
|
|
#define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */
|
|
#define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */
|
|
|
|
/* Vsc7385 switch */
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
#define CONFIG_SYS_VSC7385_BASE 0xffb00000
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull
|
|
#else
|
|
#define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_VSC7385_BR_PRELIM \
|
|
(BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
|
|
#define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \
|
|
OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \
|
|
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
|
|
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM
|
|
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM
|
|
|
|
/* The size of the VSC7385 firmware image */
|
|
#define CONFIG_VSC7385_IMAGE_SIZE 8192
|
|
#endif
|
|
|
|
/*
|
|
* Config the L2 Cache as L2 SRAM
|
|
*/
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
|
|
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
|
|
#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
|
|
#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10)
|
|
#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
|
|
#if defined(CONFIG_TARGET_P2020RDB)
|
|
#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10)
|
|
#else
|
|
#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10)
|
|
#endif
|
|
#elif defined(CONFIG_NAND)
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
|
|
#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
|
|
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
|
|
#else
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000)
|
|
#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
|
|
#endif /* CONFIG_TPL_BUILD */
|
|
#endif
|
|
#endif
|
|
|
|
/* Serial Port - controlled on board with jumper J8
|
|
* open - index 2
|
|
* shorted - index 1
|
|
*/
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
|
|
#define CONFIG_NS16550_MIN_FUNCTIONS
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
|
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
|
|
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
|
|
#define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
|
|
|
|
/*
|
|
* I2C2 EEPROM
|
|
*/
|
|
#undef CONFIG_ID_EEPROM
|
|
|
|
#define CONFIG_RTC_PT7C4338
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
|
|
|
|
/* enable read and write access to EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
|
|
/*
|
|
* eSPI - Enhanced SPI
|
|
*/
|
|
#define CONFIG_HARD_SPI
|
|
|
|
#if defined(CONFIG_SPI_FLASH)
|
|
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
|
#define CONFIG_SF_DEFAULT_MODE 0
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* General PCI
|
|
* Memory space is mapped 1-1, but I/O space must start from 0.
|
|
*/
|
|
|
|
/* controller 2, direct to uli, tgtid 2, Base address 9000 */
|
|
#define CONFIG_SYS_PCIE2_NAME "PCIe SLOT"
|
|
#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
|
|
#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
/* controller 1, Slot 2, tgtid 1, Base address a000 */
|
|
#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT"
|
|
#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#define CONFIG_TSEC1
|
|
#define CONFIG_TSEC1_NAME "eTSEC1"
|
|
#define CONFIG_TSEC2
|
|
#define CONFIG_TSEC2_NAME "eTSEC2"
|
|
#define CONFIG_TSEC3
|
|
#define CONFIG_TSEC3_NAME "eTSEC3"
|
|
|
|
#define TSEC1_PHY_ADDR 2
|
|
#define TSEC2_PHY_ADDR 0
|
|
#define TSEC3_PHY_ADDR 1
|
|
|
|
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC3_PHYIDX 0
|
|
|
|
#define CONFIG_ETHPRIME "eTSEC1"
|
|
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
#endif /* CONFIG_TSEC_ENET */
|
|
|
|
#ifdef CONFIG_QE
|
|
/* QE microcode/firmware address */
|
|
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
|
|
#define CONFIG_SYS_QE_FW_ADDR 0xefec0000
|
|
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
|
|
#endif /* CONFIG_QE */
|
|
|
|
#ifdef CONFIG_TARGET_P1025RDB
|
|
/*
|
|
* QE UEC ethernet configuration
|
|
*/
|
|
#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
|
|
|
|
#undef CONFIG_UEC_ETH
|
|
#define CONFIG_PHY_MODE_NEED_CHANGE
|
|
|
|
#define CONFIG_UEC_ETH1 /* ETH1 */
|
|
#define CONFIG_HAS_ETH0
|
|
|
|
#ifdef CONFIG_UEC_ETH1
|
|
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
|
|
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */
|
|
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */
|
|
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
|
|
#define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */
|
|
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
|
|
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
|
|
#endif /* CONFIG_UEC_ETH1 */
|
|
|
|
#define CONFIG_UEC_ETH5 /* ETH5 */
|
|
#define CONFIG_HAS_ETH1
|
|
|
|
#ifdef CONFIG_UEC_ETH5
|
|
#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */
|
|
#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE
|
|
#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */
|
|
#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH
|
|
#define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */
|
|
#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
|
|
#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
|
|
#endif /* CONFIG_UEC_ETH5 */
|
|
#endif /* CONFIG_TARGET_P1025RDB */
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#ifdef CONFIG_SPIFLASH
|
|
#define CONFIG_ENV_SPI_BUS 0
|
|
#define CONFIG_ENV_SPI_CS 0
|
|
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
|
#define CONFIG_ENV_SPI_MODE 0
|
|
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
|
|
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#elif defined(CONFIG_SDCARD)
|
|
#define CONFIG_FSL_FIXED_MMC_LOCATION
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#elif defined(CONFIG_NAND)
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
|
|
#else
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
#endif
|
|
#define CONFIG_ENV_OFFSET (1024 * 1024)
|
|
#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
|
|
#elif defined(CONFIG_SYS_RAMBOOT)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#else
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#define CONFIG_HAS_FSL_DR_USB
|
|
|
|
#if defined(CONFIG_HAS_FSL_DR_USB)
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_USB_EHCI_FSL
|
|
#define CONFIG_EHCI_DESC_BIG_ENDIAN
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1020RDB_PD)
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
|
|
#endif
|
|
|
|
#ifdef CONFIG_MMC
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
|
|
#endif
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 64 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#endif
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
#define CONFIG_HOSTNAME unknown
|
|
#define CONFIG_ROOTPATH "/opt/nfsroot"
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
|
|
|
|
/* default location for tftp and bootm */
|
|
#define CONFIG_LOADADDR 1000000
|
|
|
|
#ifdef __SW_BOOT_NOR
|
|
#define __NOR_RST_CMD \
|
|
norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
|
|
i2c mw 18 3 __SW_BOOT_MASK 1; reset
|
|
#endif
|
|
#ifdef __SW_BOOT_SPI
|
|
#define __SPI_RST_CMD \
|
|
spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
|
|
i2c mw 18 3 __SW_BOOT_MASK 1; reset
|
|
#endif
|
|
#ifdef __SW_BOOT_SD
|
|
#define __SD_RST_CMD \
|
|
sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
|
|
i2c mw 18 3 __SW_BOOT_MASK 1; reset
|
|
#endif
|
|
#ifdef __SW_BOOT_NAND
|
|
#define __NAND_RST_CMD \
|
|
nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
|
|
i2c mw 18 3 __SW_BOOT_MASK 1; reset
|
|
#endif
|
|
#ifdef __SW_BOOT_PCIE
|
|
#define __PCIE_RST_CMD \
|
|
pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
|
|
i2c mw 18 3 __SW_BOOT_MASK 1; reset
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
|
"loadaddr=1000000\0" \
|
|
"bootfile=uImage\0" \
|
|
"tftpflash=tftpboot $loadaddr $uboot; " \
|
|
"protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
|
"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
|
"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
|
|
"protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
|
|
"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
|
|
"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
|
|
"consoledev=ttyS0\0" \
|
|
"ramdiskaddr=2000000\0" \
|
|
"ramdiskfile=rootfs.ext2.gz.uboot\0" \
|
|
"fdtaddr=1e00000\0" \
|
|
"bdev=sda1\0" \
|
|
"jffs2nor=mtdblock3\0" \
|
|
"norbootaddr=ef080000\0" \
|
|
"norfdtaddr=ef040000\0" \
|
|
"jffs2nand=mtdblock9\0" \
|
|
"nandbootaddr=100000\0" \
|
|
"nandfdtaddr=80000\0" \
|
|
"ramdisk_size=120000\0" \
|
|
"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
|
|
"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
|
|
__stringify(__NOR_RST_CMD)"\0" \
|
|
__stringify(__SPI_RST_CMD)"\0" \
|
|
__stringify(__SD_RST_CMD)"\0" \
|
|
__stringify(__NAND_RST_CMD)"\0" \
|
|
__stringify(__PCIE_RST_CMD)"\0"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_HDBOOT \
|
|
"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"usb start;" \
|
|
"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
|
|
"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_USB_FAT_BOOT \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs " \
|
|
"ramdisk_size=$ramdisk_size;" \
|
|
"usb start;" \
|
|
"fatload usb 0:2 $loadaddr $bootfile;" \
|
|
"fatload usb 0:2 $fdtaddr $fdtfile;" \
|
|
"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_USB_EXT2_BOOT \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs " \
|
|
"ramdisk_size=$ramdisk_size;" \
|
|
"usb start;" \
|
|
"ext2load usb 0:4 $loadaddr $bootfile;" \
|
|
"ext2load usb 0:4 $fdtaddr $fdtfile;" \
|
|
"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_NORBOOT \
|
|
"setenv bootargs root=/dev/$jffs2nor rw " \
|
|
"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
|
|
"bootm $norbootaddr - $norfdtaddr"
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs " \
|
|
"ramdisk_size=$ramdisk_size;" \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
|
|
|
|
#endif /* __CONFIG_H */
|