u-boot-brain/arch/mips/dts/mrvl,octeon-ebb7304.dts
Stefan Roese 5fef24c912 mips: octeon: Add minimal Octeon 3 EBB7304 EVK support
This patch adds very basic minimal support for the Marvell Octeon 3
CN73xx based EBB7304 EVK. Please note that the basic Octeon port does
not support DDR3/4 initialization yet. To still use U-Boot on with this
port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot
to the prompt on this board.

Supported devices:
- UART
- reset
- CFI parallel NOR flash

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00

97 lines
1.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+
/*
* Marvell / Cavium Inc. EVB CN7300
*/
/dts-v1/;
/include/ "mrvl,cn73xx.dtsi"
/ {
model = "cavium,ebb7304";
compatible = "cavium,ebb7304";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = &uart0;
};
};
&bootbus {
/*
* bootbus CS0 for CFI flash is remapped (0x1fc0.0000 -> 1f40.0000)
* as the initial size is too small for the 8MiB flash device
*/
ranges = <0 0 0 0x1f400000 0xc00000>,
<1 0 0x10000 0x10000000 0>,
<2 0 0x10000 0x20000000 0>,
<3 0 0x10000 0x30000000 0>,
<4 0 0 0x1d020000 0x10000>,
<5 0 0x10000 0x50000000 0>,
<6 0 0x10000 0x60000000 0>,
<7 0 0x10000 0x70000000 0>;
cavium,cs-config@0 {
compatible = "cavium,octeon-3860-bootbus-config";
cavium,cs-index = <0>;
cavium,t-adr = <10>;
cavium,t-ce = <50>;
cavium,t-oe = <50>;
cavium,t-we = <35>;
cavium,t-rd-hld = <25>;
cavium,t-wr-hld = <35>;
cavium,t-pause = <0>;
cavium,t-wait = <50>;
cavium,t-page = <30>;
cavium,t-rd-dly = <0>;
cavium,page-mode = <1>;
cavium,pages = <8>;
cavium,bus-width = <8>;
};
cavium,cs-config@4 {
compatible = "cavium,octeon-3860-bootbus-config";
cavium,cs-index = <4>;
cavium,t-adr = <10>;
cavium,t-ce = <10>;
cavium,t-oe = <160>;
cavium,t-we = <100>;
cavium,t-rd-hld = <10>;
cavium,t-wr-hld = <0>;
cavium,t-pause = <50>;
cavium,t-wait = <50>;
cavium,t-page = <10>;
cavium,t-rd-dly = <10>;
cavium,pages = <0>;
cavium,bus-width = <8>;
};
flash0: nor@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0 0x340000>;
read-only;
};
partition@300000 {
label = "storage";
reg = <0x340000 0x4be000>;
};
partition@7fe000 {
label = "environment";
reg = <0x7fe000 0x2000>;
read-only;
};
};
};
&uart0 {
clock-frequency = <1200000000>;
};