mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
266 lines
6.4 KiB
C
266 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* OMAP USB PHY Support
|
|
*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#include <linux/compat.h>
|
|
#include <linux/usb/dwc3.h>
|
|
#include <linux/usb/xhci-omap.h>
|
|
|
|
#include "../host/xhci.h"
|
|
|
|
#ifdef CONFIG_OMAP_USB3PHY1_HOST
|
|
struct usb3_dpll_params {
|
|
u16 m;
|
|
u8 n;
|
|
u8 freq:3;
|
|
u8 sd;
|
|
u32 mf;
|
|
};
|
|
|
|
struct usb3_dpll_map {
|
|
unsigned long rate;
|
|
struct usb3_dpll_params params;
|
|
struct usb3_dpll_map *dpll_map;
|
|
};
|
|
|
|
static struct usb3_dpll_map dpll_map_usb[] = {
|
|
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
|
|
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
|
|
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
|
|
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
|
|
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
|
|
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
static struct usb3_dpll_params *omap_usb3_get_dpll_params(void)
|
|
{
|
|
unsigned long rate;
|
|
struct usb3_dpll_map *dpll_map = dpll_map_usb;
|
|
|
|
rate = get_sys_clk_freq();
|
|
|
|
for (; dpll_map->rate; dpll_map++) {
|
|
if (rate == dpll_map->rate)
|
|
return &dpll_map->params;
|
|
}
|
|
|
|
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
u32 val;
|
|
|
|
writel(SET_PLL_GO, &phy_regs->pll_go);
|
|
do {
|
|
val = readl(&phy_regs->pll_status);
|
|
if (val & PLL_LOCK)
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
struct usb3_dpll_params *dpll_params;
|
|
u32 val;
|
|
|
|
dpll_params = omap_usb3_get_dpll_params();
|
|
if (!dpll_params)
|
|
return;
|
|
|
|
val = readl(&phy_regs->pll_config_1);
|
|
val &= ~PLL_REGN_MASK;
|
|
val |= dpll_params->n << PLL_REGN_SHIFT;
|
|
writel(val, &phy_regs->pll_config_1);
|
|
|
|
val = readl(&phy_regs->pll_config_2);
|
|
val &= ~PLL_SELFREQDCO_MASK;
|
|
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
|
|
writel(val, &phy_regs->pll_config_2);
|
|
|
|
val = readl(&phy_regs->pll_config_1);
|
|
val &= ~PLL_REGM_MASK;
|
|
val |= dpll_params->m << PLL_REGM_SHIFT;
|
|
writel(val, &phy_regs->pll_config_1);
|
|
|
|
val = readl(&phy_regs->pll_config_4);
|
|
val &= ~PLL_REGM_F_MASK;
|
|
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
|
|
writel(val, &phy_regs->pll_config_4);
|
|
|
|
val = readl(&phy_regs->pll_config_3);
|
|
val &= ~PLL_SD_MASK;
|
|
val |= dpll_params->sd << PLL_SD_SHIFT;
|
|
writel(val, &phy_regs->pll_config_3);
|
|
|
|
omap_usb_dpll_relock(phy_regs);
|
|
}
|
|
|
|
static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
u32 rate = get_sys_clk_freq()/1000000;
|
|
u32 val;
|
|
|
|
val = readl((*ctrl)->control_phy_power_usb);
|
|
val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK);
|
|
val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON);
|
|
val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT;
|
|
|
|
writel(val, (*ctrl)->control_phy_power_usb);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl((*ctrl)->control_phy_power_usb);
|
|
if (on) {
|
|
val &= ~USB3_PWRCTL_CLK_CMD_MASK;
|
|
val |= USB3_PHY_TX_RX_POWERON;
|
|
} else {
|
|
val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON);
|
|
}
|
|
|
|
writel(val, (*ctrl)->control_phy_power_usb);
|
|
}
|
|
|
|
void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
omap_usb_dpll_lock(phy_regs);
|
|
usb3_phy_partial_powerup(phy_regs);
|
|
/*
|
|
* Give enough time for the PHY to partially power-up before
|
|
* powering it up completely. delay value suggested by the HW
|
|
* team.
|
|
*/
|
|
mdelay(100);
|
|
}
|
|
|
|
static void omap_enable_usb3_phy(struct omap_xhci *omap)
|
|
{
|
|
u32 val;
|
|
|
|
val = (USBOTGSS_DMADISABLE |
|
|
USBOTGSS_STANDBYMODE_SMRT_WKUP |
|
|
USBOTGSS_IDLEMODE_NOIDLE);
|
|
writel(val, &omap->otg_wrapper->sysconfig);
|
|
|
|
/* Clear the utmi OTG status */
|
|
val = readl(&omap->otg_wrapper->utmi_otg_status);
|
|
writel(val, &omap->otg_wrapper->utmi_otg_status);
|
|
|
|
/* Enable interrupts */
|
|
writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0);
|
|
val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_OEVT_EN);
|
|
writel(val, &omap->otg_wrapper->irqenable_set_1);
|
|
|
|
/* Clear the IRQ status */
|
|
val = readl(&omap->otg_wrapper->irqstatus_1);
|
|
writel(val, &omap->otg_wrapper->irqstatus_1);
|
|
val = readl(&omap->otg_wrapper->irqstatus_0);
|
|
writel(val, &omap->otg_wrapper->irqstatus_0);
|
|
};
|
|
#endif /* CONFIG_OMAP_USB3PHY1_HOST */
|
|
|
|
#ifdef CONFIG_OMAP_USB2PHY2_HOST
|
|
static void omap_enable_usb2_phy2(struct omap_xhci *omap)
|
|
{
|
|
u32 reg, val;
|
|
|
|
val = (~USB2PHY_AUTORESUME_EN & USB2PHY_DISCHGDET);
|
|
writel(val, (*ctrl)->control_srcomp_north_side);
|
|
|
|
setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl,
|
|
(USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K |
|
|
OTG_SS_CLKCTRL_MODULEMODE_HW));
|
|
|
|
/* This is an undocumented Reserved register */
|
|
reg = 0x4a0086c0;
|
|
val = readl(reg);
|
|
val |= 0x100;
|
|
setbits_le32(reg, val);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
return;
|
|
}
|
|
#endif /* CONFIG_OMAP_USB2PHY2_HOST */
|
|
|
|
#ifdef CONFIG_AM437X_USB2PHY2_HOST
|
|
static void am437x_enable_usb2_phy2(struct omap_xhci *omap)
|
|
{
|
|
const u32 usb_otg_ss_clk_val = (USBOTGSSX_CLKCTRL_MODULE_EN |
|
|
USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
|
|
|
|
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS0_CLKCTRL);
|
|
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS1_CLKCTRL);
|
|
|
|
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP0_CLKCTRL);
|
|
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP1_CLKCTRL);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
u32 val;
|
|
|
|
/* USB1_CTRL */
|
|
val = readl(USB1_CTRL);
|
|
if (on) {
|
|
/*
|
|
* these bits are re-used on AM437x to power up/down the USB
|
|
* CM and OTG PHYs, if we don't toggle them, USB will not be
|
|
* functional on newer silicon revisions
|
|
*/
|
|
val &= ~(USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN);
|
|
} else {
|
|
val |= USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN;
|
|
}
|
|
|
|
writel(val, USB1_CTRL);
|
|
}
|
|
#endif /* CONFIG_AM437X_USB2PHY2_HOST */
|
|
|
|
void omap_enable_phy(struct omap_xhci *omap)
|
|
{
|
|
#ifdef CONFIG_OMAP_USB2PHY2_HOST
|
|
omap_enable_usb2_phy2(omap);
|
|
#endif
|
|
|
|
#ifdef CONFIG_AM437X_USB2PHY2_HOST
|
|
am437x_enable_usb2_phy2(omap);
|
|
#endif
|
|
|
|
#ifdef CONFIG_OMAP_USB3PHY1_HOST
|
|
omap_enable_usb3_phy(omap);
|
|
omap_usb3_phy_init(omap->usb3_phy);
|
|
#endif
|
|
}
|