Jon Hunter 5faba1eac6 omap5912-osk: Fix booting from NOR flash ... The omap5912-osk board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash at address 0x00000000. The omap5912-osk board only has 32MB of RAM and so fix the comment in the omap5912-osk config.mk file as well. Signed-off-by: Jon Hunter <jon-hunter@ti.com>		2013-04-10 16:03:01 -04:00
..
am335x	am335x: Update timings for the beaglebone again	2013-04-10 10:04:40 -04:00
am3517crane	omap_hsmmc: add driver check for write protection	2013-03-08 16:41:13 -05:00
beagle	omap3: allow dynamic selection of gfx_format	2013-03-08 16:41:13 -05:00
dra7xx	arm: dra7xx: Add board files for DRA7XX socs	2013-03-11 11:39:30 -04:00
evm	omap_hsmmc: add driver check for write protection	2013-03-08 16:41:13 -05:00
omap5_uevm	ARM: OMAP5: Rename omap5_evm to omap5_uevm	2013-04-08 11:29:05 -04:00
omap730p2	doc: cleanup - move board READMEs into respective board directories	2012-07-29 15:42:02 +02:00
omap1510inn	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
omap2420h4	omap2420-h4: Fix booting from NOR flash	2013-04-08 11:29:05 -04:00
omap5912osk	omap5912-osk: Fix booting from NOR flash	2013-04-10 16:03:01 -04:00
panda	omap_hsmmc: add driver check for write protection	2013-03-08 16:41:13 -05:00
sdp3430	omap_hsmmc: add driver check for write protection	2013-03-08 16:41:13 -05:00
sdp4430	omap_hsmmc: add driver check for write protection	2013-03-08 16:41:13 -05:00
ti814x	ti814x_evm: add ti814x evm board support	2013-03-24 12:49:12 -04:00
tnetv107xevm	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00