mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
698 lines
22 KiB
C
698 lines
22 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
|
|
*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* Wolfgang Denk <wd@denx.de>
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* (C) Copyright 2002,2003 Motorola,Inc.
|
|
* Xianghua Xiao <X.Xiao@motorola.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* TQM85xx (8560/40/55/41/48) board configuration file
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_BOOKE 1 /* BOOKE */
|
|
#define CONFIG_E500 1 /* BOOKE e500 family */
|
|
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
|
|
|
|
#if defined(CONFIG_TQM8548_BE)
|
|
#define CONFIG_SYS_TEXT_BASE 0xfff80000
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0xfffc0000
|
|
#endif
|
|
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
#define CONFIG_TQM8548
|
|
#endif
|
|
|
|
#define CONFIG_PCI
|
|
#ifndef CONFIG_TQM8548_AG
|
|
#define CONFIG_PCI1 /* PCI/PCI-X controller */
|
|
#endif
|
|
#ifdef CONFIG_TQM8548
|
|
#define CONFIG_PCIE1 /* PCI Express interface */
|
|
#endif
|
|
|
|
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
|
|
#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */
|
|
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
|
|
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
|
|
|
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
|
|
|
|
/*
|
|
* Configuration for big NOR Flashes
|
|
*
|
|
* Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
|
|
* Please be aware, that this changes the whole memory map (new CCSRBAR
|
|
* address, etc). You have to use an adapted Linux kernel or FDT blob
|
|
* if this option is set.
|
|
*/
|
|
#undef CONFIG_TQM_BIGFLASH
|
|
|
|
/*
|
|
* NAND flash support (disabled by default)
|
|
*
|
|
* Warning: NAND support will likely increase the U-Boot image size
|
|
* to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary.
|
|
*/
|
|
#ifdef CONFIG_TQM8548_BE
|
|
#define CONFIG_NAND
|
|
#endif
|
|
|
|
/*
|
|
* MPC8540 and MPC8548 don't have CPM module
|
|
*/
|
|
#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
|
|
#define CONFIG_CPM2 1 /* has CPM2 */
|
|
#endif
|
|
|
|
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
|
|
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
#define CONFIG_CAN_DRIVER /* CAN Driver support */
|
|
#endif
|
|
|
|
/*
|
|
* sysclk for MPC85xx
|
|
*
|
|
* Two valid values are:
|
|
* 33333333
|
|
* 66666666
|
|
*
|
|
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
|
* is likely the desired value here, so that is now the default.
|
|
* The board, however, can run at 66MHz. In any event, this value
|
|
* must match the settings of some switches. Details can be found
|
|
* in the README.mpc85xxads.
|
|
*/
|
|
|
|
#ifndef CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_CLK_FREQ 33333333
|
|
#endif
|
|
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
|
|
#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
|
|
|
|
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
|
#define CONFIG_SYS_MEMTEST_START 0x00000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x10000000
|
|
|
|
/*
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*/
|
|
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
|
|
#ifdef CONFIG_TQM_BIGFLASH
|
|
#define CONFIG_SYS_CCSRBAR 0xA0000000 /* relocated CCSRBAR */
|
|
#else /* !CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
|
|
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
|
|
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
#ifdef CONFIG_TQM8548_AG
|
|
#define CONFIG_VERY_BIG_RAM
|
|
#endif
|
|
|
|
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
|
|
|
#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560)
|
|
/* TQM8540 & 8560 need DLL-override */
|
|
#define CONFIG_DDR_DLL /* DLL fix needed */
|
|
#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */
|
|
#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
|
|
|
|
#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
|
|
defined(CONFIG_TQM8548)
|
|
#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */
|
|
#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
|
|
|
|
/*
|
|
* Flash on the Local Bus
|
|
*/
|
|
#ifdef CONFIG_TQM_BIGFLASH
|
|
#define CONFIG_SYS_FLASH0 0xE0000000
|
|
#define CONFIG_SYS_FLASH1 0xC0000000
|
|
#else /* !CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_FLASH0 0xFC000000
|
|
#define CONFIG_SYS_FLASH1 0xF8000000
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
|
|
|
|
#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */
|
|
|
|
/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
|
|
*
|
|
* Note: According to timing specifications external addr latch delay
|
|
* (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
|
|
*
|
|
* For other Local Bus Clocks see following table:
|
|
*
|
|
* Clock/MHz CONFIG_SYS_ORx_PRELIM
|
|
* 166 0x.....CA5
|
|
* 133 0x.....C85
|
|
* 100 0x.....C65
|
|
* 83 0x.....FA2
|
|
* 66 0x.....C82
|
|
* 50 0x.....C60
|
|
* 42 0x.....040
|
|
* 33 0x.....030
|
|
* 25 0x.....020
|
|
*
|
|
*/
|
|
#ifdef CONFIG_TQM_BIGFLASH
|
|
#define CONFIG_SYS_BR0_PRELIM 0xE0001801 /* port size 32bit */
|
|
#define CONFIG_SYS_OR0_PRELIM 0xE0000040 /* 512MB Flash */
|
|
#define CONFIG_SYS_BR1_PRELIM 0xC0001801 /* port size 32bit */
|
|
#define CONFIG_SYS_OR1_PRELIM 0xE0000040 /* 512MB Flash */
|
|
#else /* !CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_BR0_PRELIM 0xfc001801 /* port size 32bit */
|
|
#define CONFIG_SYS_OR0_PRELIM 0xfc000040 /* 64MB Flash */
|
|
#define CONFIG_SYS_BR1_PRELIM 0xf8001801 /* port size 32bit */
|
|
#define CONFIG_SYS_OR1_PRELIM 0xfc000040 /* 64MB Flash */
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
|
|
#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
|
|
#undef CONFIG_SYS_FLASH_CHECKSUM
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
|
|
/*
|
|
* Note: when changing the Local Bus clock divider you have to
|
|
* change the timing values in CONFIG_SYS_ORx_PRELIM.
|
|
*
|
|
* LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
|
|
* LCRR[16:17] EADC : External address delay cycles. It should be set to 2
|
|
* for Local Bus Clock > 83.3 MHz.
|
|
*/
|
|
#define CONFIG_SYS_LBC_LCRR 0x00030008 /* LB clock ratio reg */
|
|
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
|
|
#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
|
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
|
|
|
|
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \
|
|
+ 0x04010000) /* Initial RAM address */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
|
|
|
|
/* Serial Port */
|
|
#if defined(CONFIG_TQM8560)
|
|
|
|
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
|
#undef CONFIG_CONS_NONE /* define if console on something else */
|
|
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
|
|
|
#else /* !CONFIG_TQM8560 */
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
|
|
|
|
/* PS/2 Keyboard */
|
|
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
|
|
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
|
|
#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */
|
|
#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */
|
|
#define CONFIG_BOARD_EARLY_INIT_R 1
|
|
|
|
#endif /* CONFIG_TQM8560 */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
|
|
#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
/* pass open firmware flat tree */
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
|
|
|
/* CAN */
|
|
#define CONFIG_SYS_CAN_BASE (CONFIG_SYS_CCSRBAR \
|
|
+ 0x03000000) /* CAN base address */
|
|
#ifdef CONFIG_CAN_DRIVER
|
|
#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */
|
|
#define CONFIG_SYS_OR2_CAN (CONFIG_SYS_CAN_OR_AM | OR_UPM_BI)
|
|
#define CONFIG_SYS_BR2_CAN ((CONFIG_SYS_CAN_BASE & BR_BA) | \
|
|
BR_PS_8 | BR_MS_UPMC | BR_V)
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_I2C_NOPROBES {0x48} /* Don't probe these addrs */
|
|
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
|
|
|
/* I2C RTC */
|
|
#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
|
|
|
|
/* I2C EEPROM */
|
|
/*
|
|
* EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also).
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
|
|
|
|
/* I2C SYSMON (LM75) */
|
|
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
|
|
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
|
|
#define CONFIG_SYS_DTT_MAX_TEMP 70
|
|
#define CONFIG_SYS_DTT_LOW_TEMP -30
|
|
#define CONFIG_SYS_DTT_HYSTERESIS 3
|
|
|
|
#ifndef CONFIG_PCIE1
|
|
/* RapidIO MMU */
|
|
#ifdef CONFIG_TQM_BIGFLASH
|
|
#define CONFIG_SYS_RIO_MEM_BASE 0xb0000000 /* base address */
|
|
#define CONFIG_SYS_RIO_MEM_SIZE 0x10000000 /* 256M */
|
|
#else /* !CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */
|
|
#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
|
|
#endif /* CONFIG_PCIE1 */
|
|
|
|
/* NAND FLASH */
|
|
#ifdef CONFIG_NAND
|
|
|
|
#define CONFIG_NAND_FSL_UPM 1
|
|
|
|
#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */
|
|
|
|
/* address distance between chip selects */
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1
|
|
#define CONFIG_SYS_NAND_CS_DIST 0x200
|
|
|
|
#define CONFIG_SYS_NAND_SIZE 0x8000
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_CCSRBAR + 0x03010000)
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 2 /* Number of chips per device */
|
|
|
|
/* CS3 for NAND Flash */
|
|
#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_NAND_BASE & BR_BA) | \
|
|
BR_PS_8 | BR_MS_UPMB | BR_V)
|
|
#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI)
|
|
|
|
#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
|
|
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/*
|
|
* General PCI
|
|
* Addresses are mapped 1-1.
|
|
*/
|
|
#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
|
|
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCI1_IO_BUS (CONFIG_SYS_CCSRBAR + 0x02000000)
|
|
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS
|
|
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* General PCI express
|
|
* Addresses are mapped 1-1.
|
|
*/
|
|
#ifdef CONFIG_TQM_BIGFLASH
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0xb0000000
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0xaf000000
|
|
#else /* !CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0xef000000
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS
|
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */
|
|
#endif /* CONFIG_PCIE1 */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#define CONFIG_EEPRO100
|
|
#undef CONFIG_TULIP
|
|
|
|
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#define CONFIG_NET_MULTI 1
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
#define TSEC1_PHY_ADDR 2
|
|
#define TSEC2_PHY_ADDR 1
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#define FEC_PHY_ADDR 3
|
|
#define FEC_PHYIDX 0
|
|
#define FEC_FLAGS 0
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
/*
|
|
* TQM8548 has 4 ethernet ports. 4 ETSEC's.
|
|
*
|
|
* On the STK85xx Starterkit the ETSEC3/4 ports are on an
|
|
* additional adapter (AIO) between module and Starterkit.
|
|
*/
|
|
#define CONFIG_TSEC3 1
|
|
#define CONFIG_TSEC3_NAME "TSEC2"
|
|
#define CONFIG_TSEC4 1
|
|
#define CONFIG_TSEC4_NAME "TSEC3"
|
|
#define TSEC3_PHY_ADDR 4
|
|
#define TSEC4_PHY_ADDR 5
|
|
#define TSEC3_PHYIDX 0
|
|
#define TSEC4_PHYIDX 0
|
|
#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define CONFIG_HAS_ETH3
|
|
#define CONFIG_HAS_ETH4
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
/* Options are TSEC[0-1], FEC */
|
|
#define CONFIG_ETHPRIME "TSEC0"
|
|
|
|
#if defined(CONFIG_TQM8540)
|
|
/*
|
|
* TQM8540 has 3 ethernet ports. 2 TSEC's and one FEC.
|
|
* The FEC port is connected on the same signals as the FCC3 port
|
|
* of the TQM8560 to the baseboard (STK85xx Starterkit).
|
|
*
|
|
* On the STK85xx Starterkit the X47/X50 jumper has to be set to
|
|
* a - d (X50.2 - 3) to enable the FEC port.
|
|
*/
|
|
#define CONFIG_MPC85XX_FEC 1
|
|
#define CONFIG_MPC85XX_FEC_NAME "FEC"
|
|
#endif
|
|
|
|
#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
|
|
/*
|
|
* TQM8541/55 have 4 ethernet ports. 2 TSEC's and 2 FCC's. Only one FCC port
|
|
* can be used at once, since only one FCC port is available on the STK85xx
|
|
* Starterkit.
|
|
*
|
|
* To use this port you have to configure U-Boot to use the FCC port 1...2
|
|
* and set the X47/X50 jumper to:
|
|
* FCC1: a - b (X47.2 - X50.2)
|
|
* FCC2: a - c (X50.2 - 1)
|
|
*/
|
|
#define CONFIG_ETHER_ON_FCC
|
|
#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */
|
|
#endif
|
|
|
|
#if defined(CONFIG_TQM8560)
|
|
/*
|
|
* TQM8560 has 5 ethernet ports. 2 TSEC's and 3 FCC's. Only one FCC port
|
|
* can be used at once, since only one FCC port is available on the STK85xx
|
|
* Starterkit.
|
|
*
|
|
* To use this port you have to configure U-Boot to use the FCC port 1...3
|
|
* and set the X47/X50 jumper to:
|
|
* FCC1: a - b (X47.2 - X50.2)
|
|
* FCC2: a - c (X50.2 - 1)
|
|
* FCC3: a - d (X50.2 - 3)
|
|
*/
|
|
#define CONFIG_ETHER_ON_FCC
|
|
#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */
|
|
#endif
|
|
|
|
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
|
|
#define CONFIG_ETHER_ON_FCC1
|
|
#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
|
|
CMXFCR_TF1CS_MSK)
|
|
#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
|
|
#define CONFIG_ETHER_ON_FCC2
|
|
#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
|
|
CMXFCR_TF2CS_MSK)
|
|
#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
|
|
#define CONFIG_ETHER_ON_FCC3
|
|
#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
|
|
CMXFCR_TF3CS_MSK)
|
|
#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
#endif
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with ts */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
#ifdef CONFIG_NAND
|
|
/*
|
|
* Use NAND-FLash as JFFS2 device
|
|
*/
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_JFFS2
|
|
|
|
#define CONFIG_JFFS2_NAND 1
|
|
|
|
#ifdef CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define MTDIDS_DEFAULT "nand0=TQM85xx-nand"
|
|
#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-"
|
|
#else
|
|
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
|
|
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
|
|
#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */
|
|
#endif /* CONFIG_CMD_MTDPARTS */
|
|
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_SNTP
|
|
#ifndef CONFIG_TQM8548_AG
|
|
#define CONFIG_CMD_DATE
|
|
#endif
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_DTT
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buf Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
|
|
|
|
|
/*
|
|
* Setup some board specific values for the default environment variables
|
|
*/
|
|
#ifdef CONFIG_CPM2
|
|
#define CONFIG_ENV_CONSDEV "consdev=ttyCPM0\0"
|
|
#else
|
|
#define CONFIG_ENV_CONSDEV "consdev=ttyS0\0"
|
|
#endif
|
|
#define CONFIG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
|
|
MK_STR(CONFIG_HOSTNAME)".dtb\0"
|
|
#define CONFIG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
|
|
#define CONFIG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
|
|
"uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_ENV_BOOTFILE \
|
|
CONFIG_ENV_FDT_FILE \
|
|
CONFIG_ENV_CONSDEV \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask" \
|
|
":$hostname:$netdev:off panic=1\0" \
|
|
"addcons=setenv bootargs $bootargs " \
|
|
"console=$consdev,$baudrate\0" \
|
|
"flash_nfs=run nfsargs addip addcons;" \
|
|
"bootm $kernel_addr - $fdt_addr\0" \
|
|
"flash_self=run ramargs addip addcons;" \
|
|
"bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
|
|
"net_nfs=tftp $kernel_addr_r $bootfile;" \
|
|
"tftp $fdt_addr_r $fdt_file;" \
|
|
"run nfsargs addip addcons;" \
|
|
"bootm $kernel_addr_r - $fdt_addr_r\0" \
|
|
"rootpath=/opt/eldk/ppc_85xx\0" \
|
|
"fdt_addr_r=900000\0" \
|
|
"kernel_addr_r=1000000\0" \
|
|
"fdt_addr=ffec0000\0" \
|
|
"kernel_addr=ffd00000\0" \
|
|
"ramdisk_addr=ff800000\0" \
|
|
CONFIG_ENV_UBOOT \
|
|
"load=tftp 100000 $uboot\0" \
|
|
"update=protect off $uboot_addr +$filesize;" \
|
|
"erase $uboot_addr +$filesize;" \
|
|
"cp.b 100000 $uboot_addr $filesize" \
|
|
"upd=run load update\0" \
|
|
""
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
#endif /* __CONFIG_H */
|