mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Mike Frysinger](/assets/img/avatar_default.png)
Now that none of the core checks CONFIG_NET_MULTI, there's not much point in boards defining it. So scrub all references to it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
171 lines
4.1 KiB
C
171 lines
4.1 KiB
C
/*
|
|
* U-boot - Configuration file for BF561 Acvilon System On Module
|
|
* For more information please go to http://www.niistt.ru/
|
|
*/
|
|
|
|
#ifndef __CONFIG_BF561_ACVILON_H__
|
|
#define __CONFIG_BF561_ACVILON_H__
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf561-0.5
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 12000000
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 50
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 5
|
|
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 10
|
|
#define CONFIG_MEM_SIZE 128
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x300
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x00B11189
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0x4e
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
|
|
|
|
|
/*
|
|
* RTC Settings
|
|
*/
|
|
#define CONFIG_RTC_DS1337
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
|
|
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
|
|
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
|
|
#define CONFIG_SYS_I2C_DTT_ADDR 0x49
|
|
/*#define CONFIG_SYS_DTT_MAX_TEMP 70
|
|
#define CONFIG_SYS_DTT_LOW_TEMP -30
|
|
#define CONFIG_SYS_DTT_HYSTERESIS 3*/
|
|
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DTT
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
#define CONFIG_SMC911X 1
|
|
#define CONFIG_SMC911X_32_BIT
|
|
/* #define CONFIG_SMC911X_16_BIT */
|
|
#define CONFIG_SMC911X_BASE 0x28000000
|
|
|
|
#endif /* (CONFIG_CMD_NET) */
|
|
|
|
#define CONFIG_HOSTNAME bf561-acvilon
|
|
|
|
/* Uncomment next line to use fixed MAC address */
|
|
/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
|
|
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
|
|
/*
|
|
* I2C Settings
|
|
*/
|
|
#define CONFIG_HARD_I2C
|
|
/* Use 300kHz speed by default */
|
|
#define CONFIG_SYS_I2C_SPEED 0x00
|
|
#define CONFIG_PCA9564_I2C
|
|
#define CONFIG_PCA9564_BASE 0x2c000000
|
|
|
|
|
|
/*
|
|
* SPI Settings
|
|
*/
|
|
#define CONFIG_BFIN_SPI
|
|
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
|
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_ATMEL
|
|
|
|
|
|
/*
|
|
* Env Storage Settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
/* #define CONFIG_CMD_SAVEENV */
|
|
#define CONFIG_ENV_SECT_SIZE (1056 * 8)
|
|
#define CONFIG_ENV_OFFSET ((16 + 256) * 1056)
|
|
#define CONFIG_ENV_SIZE (8 * 1056)
|
|
|
|
|
|
/*
|
|
* NAND Settings
|
|
* We're using NAND_PLAT driver to make things simplier
|
|
*/
|
|
#define CONFIG_NAND_PLAT
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_NAND_BASE 0x24000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
|
|
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
|
|
#define BFIN_NAND_WRITE(addr, cmd) \
|
|
do { \
|
|
bfin_write8(addr, cmd); \
|
|
SSYNC(); \
|
|
} while (0)
|
|
|
|
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
|
|
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
|
|
#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10
|
|
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_UART_CONSOLE 0
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CONFIG_SYS_PROMPT "Acvilon> "
|
|
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#endif /* __CONFIG_BF561_ACVILON_H__ */
|