u-boot-brain/board/freescale/mpc832xemds/mpc832xemds.c
Simon Glass e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00

167 lines
3.9 KiB
C

/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
#include <command.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
#include <asm/mmu.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* ETH3 */
{1, 0, 1, 0, 1}, /* TxD0 */
{1, 1, 1, 0, 1}, /* TxD1 */
{1, 2, 1, 0, 1}, /* TxD2 */
{1, 3, 1, 0, 1}, /* TxD3 */
{1, 9, 1, 0, 1}, /* TxER */
{1, 12, 1, 0, 1}, /* TxEN */
{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
{1, 4, 2, 0, 1}, /* RxD0 */
{1, 5, 2, 0, 1}, /* RxD1 */
{1, 6, 2, 0, 1}, /* RxD2 */
{1, 7, 2, 0, 1}, /* RxD3 */
{1, 8, 2, 0, 1}, /* RxER */
{1, 10, 2, 0, 1}, /* RxDV */
{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
{1, 11, 2, 0, 1}, /* COL */
{1, 13, 2, 0, 1}, /* CRS */
/* ETH4 */
{1, 18, 1, 0, 1}, /* TxD0 */
{1, 19, 1, 0, 1}, /* TxD1 */
{1, 20, 1, 0, 1}, /* TxD2 */
{1, 21, 1, 0, 1}, /* TxD3 */
{1, 27, 1, 0, 1}, /* TxER */
{1, 30, 1, 0, 1}, /* TxEN */
{3, 6, 2, 0, 1}, /* TxCLK->CLK8 */
{1, 22, 2, 0, 1}, /* RxD0 */
{1, 23, 2, 0, 1}, /* RxD1 */
{1, 24, 2, 0, 1}, /* RxD2 */
{1, 25, 2, 0, 1}, /* RxD3 */
{1, 26, 1, 0, 1}, /* RxER */
{1, 28, 2, 0, 1}, /* Rx_DV */
{3, 31, 2, 0, 1}, /* RxCLK->CLK7 */
{1, 29, 2, 0, 1}, /* COL */
{1, 31, 2, 0, 1}, /* CRS */
{3, 4, 3, 0, 2}, /* MDIO */
{3, 5, 1, 0, 2}, /* MDC */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
int board_early_init_f(void)
{
volatile u8 *bcsr = (volatile u8 *)CONFIG_SYS_BCSR;
/* Enable flash write */
bcsr[9] &= ~0x08;
return 0;
}
int board_early_init_r(void)
{
#ifdef CONFIG_PQ_MDS_PIB
pib_init();
#endif
return 0;
}
int fixed_sdram(void);
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = fixed_sdram();
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
}
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
msize = CONFIG_SYS_DDR_SIZE;
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
if (ddr_size & 1) {
return -1;
}
}
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CONFIG_SYS_DDR_SIZE != 128)
#warning Currenly any ddr size other than 128 is not supported
#endif
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
__asm__ __volatile__ ("sync");
udelay(200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
__asm__ __volatile__ ("sync");
return msize;
}
int checkboard(void)
{
puts("Board: Freescale MPC832XEMDS\n");
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
return 0;
}
#endif