mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 04:18:51 +09:00
![Michal Simek](/assets/img/avatar_default.png)
Node name should be <name>@<address> which is not how partitions are described. Issue was found by running dtbs_check as: flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot', 'partition@qspi-linux', 'partition@qspi-rootfs' do not match any of the regexes: ... Signed-off-by: Michal Simek <michal.simek@xilinx.com>
201 lines
3.2 KiB
Plaintext
201 lines
3.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* dts file for Xilinx ZynqMP zc1751-xm015-dc1
|
|
*
|
|
* (C) Copyright 2015 - 2020, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "zynqmp.dtsi"
|
|
#include "zynqmp-clk-ccf.dtsi"
|
|
|
|
/ {
|
|
model = "ZynqMP zc1751-xm015-dc1 RevA";
|
|
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
|
|
|
aliases {
|
|
ethernet0 = &gem3;
|
|
gpio0 = &gpio;
|
|
i2c0 = &i2c1;
|
|
mmc0 = &sdhci0;
|
|
mmc1 = &sdhci1;
|
|
rtc0 = &rtc;
|
|
serial0 = &uart0;
|
|
spi0 = &qspi;
|
|
usb0 = &usb0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
|
|
};
|
|
};
|
|
|
|
&fpd_dma_chan1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan8 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gem3 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
eeprom: eeprom@55 {
|
|
compatible = "atmel,24c64"; /* 24AA64 */
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <108000000>; /* Based on DC1 spec */
|
|
partition@0 { /* for testing purpose */
|
|
label = "qspi-fsbl-uboot";
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
partition@100000 { /* for testing purpose */
|
|
label = "qspi-linux";
|
|
reg = <0x100000 0x500000>;
|
|
};
|
|
partition@600000 { /* for testing purpose */
|
|
label = "qspi-device-tree";
|
|
reg = <0x600000 0x20000>;
|
|
};
|
|
partition@620000 { /* for testing purpose */
|
|
label = "qspi-rootfs";
|
|
reg = <0x620000 0x5E0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
/* SATA phy OOB timing settings */
|
|
ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
|
|
ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
|
|
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
|
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
|
ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
|
|
ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
|
|
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
|
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
|
};
|
|
|
|
/* eMMC */
|
|
&sdhci0 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
xlnx,mio_bank = <0>;
|
|
};
|
|
|
|
/* SD1 with level shifter */
|
|
&sdhci1 {
|
|
status = "okay";
|
|
/*
|
|
* This property should be removed for supporting UHS mode
|
|
*/
|
|
no-1-8-v;
|
|
xlnx,mio_bank = <1>;
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* ULPI SMSC USB3320 */
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&zynqmp_dpsub {
|
|
status = "okay";
|
|
};
|
|
|
|
&zynqmp_dp_snd_pcm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&zynqmp_dp_snd_pcm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&zynqmp_dp_snd_card0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&zynqmp_dp_snd_codec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&xlnx_dpdma {
|
|
status = "okay";
|
|
};
|