mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
402 lines
8.9 KiB
C
402 lines
8.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <i2c.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
#include <hwconfig.h>
|
|
#include "../common/qixis.h"
|
|
#include "t102xqds.h"
|
|
#include "t102xqds_qixis.h"
|
|
#include "../common/sleep.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
static const char *const freq[] = {"100", "125", "156.25", "100.0"};
|
|
int clock;
|
|
u8 sw = QIXIS_READ(arch);
|
|
|
|
printf("Board: %sQDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
|
|
printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
puts("SD/MMC\n");
|
|
#elif CONFIG_SPIFLASH
|
|
puts("SPI\n");
|
|
#else
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("PromJet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else if (sw == 0x15)
|
|
printf("IFC Card\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
#endif
|
|
|
|
printf("FPGA: v%d (%s), build %d",
|
|
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
|
(int)qixis_read_minor());
|
|
/* the timestamp string contains "\n" at the end */
|
|
printf(" on %s", qixis_read_time(buf));
|
|
|
|
puts("SERDES Reference: ");
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
clock = (sw >> 6) & 3;
|
|
printf("Clock1=%sMHz ", freq[clock]);
|
|
clock = (sw >> 4) & 3;
|
|
printf("Clock2=%sMHz\n", freq[clock]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int select_i2c_ch_pca9547(u8 ch)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
|
|
if (ret) {
|
|
puts("PCA: failed to select proper channel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int board_mux_lane_to_slot(void)
|
|
{
|
|
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_prtcl_s1;
|
|
u8 brdcfg9;
|
|
|
|
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
|
|
|
|
switch (srds_prtcl_s1) {
|
|
case 0:
|
|
/* SerDes1 is not enabled */
|
|
break;
|
|
case 0xd5:
|
|
case 0x5b:
|
|
case 0x6b:
|
|
case 0x77:
|
|
case 0x6f:
|
|
case 0x7f:
|
|
QIXIS_WRITE(brdcfg[12], 0x8c);
|
|
break;
|
|
case 0x40:
|
|
QIXIS_WRITE(brdcfg[12], 0xfc);
|
|
break;
|
|
case 0xd6:
|
|
case 0x5a:
|
|
case 0x6a:
|
|
case 0x56:
|
|
QIXIS_WRITE(brdcfg[12], 0x88);
|
|
break;
|
|
case 0x47:
|
|
QIXIS_WRITE(brdcfg[12], 0xcc);
|
|
break;
|
|
case 0x46:
|
|
QIXIS_WRITE(brdcfg[12], 0xc8);
|
|
break;
|
|
case 0x95:
|
|
case 0x99:
|
|
brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
|
QIXIS_WRITE(brdcfg[12], 0x8c);
|
|
break;
|
|
case 0x116:
|
|
QIXIS_WRITE(brdcfg[12], 0x00);
|
|
break;
|
|
case 0x115:
|
|
case 0x119:
|
|
case 0x129:
|
|
case 0x12b:
|
|
/* Aurora, PCIe, SGMII, SATA */
|
|
QIXIS_WRITE(brdcfg[12], 0x04);
|
|
break;
|
|
default:
|
|
printf("WARNING: unsupported for SerDes Protocol %d\n",
|
|
srds_prtcl_s1);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_T1024
|
|
static void board_mux_setup(void)
|
|
{
|
|
u8 brdcfg15;
|
|
|
|
brdcfg15 = QIXIS_READ(brdcfg[15]);
|
|
brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
|
|
|
|
if (hwconfig_arg_cmp("pin_mux", "tdm")) {
|
|
/* Route QE_TDM multiplexed signals to TDM Riser slot */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
|
|
QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
|
|
QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
|
|
~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
|
|
/* to UCC (ProfiBus) interface */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
|
|
/* to DVI (HDMI) encoder */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
|
|
/* to DFP (LCD) encoder */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
|
|
BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
|
|
}
|
|
|
|
if (hwconfig_arg_cmp("adaptor", "sdxc"))
|
|
/* Route SPI_CS multiplexed signals to SD slot */
|
|
QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
|
|
~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
|
|
}
|
|
#endif
|
|
|
|
void board_retimer_ds125df111_init(void)
|
|
{
|
|
u8 reg;
|
|
|
|
/* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
|
|
reg = I2C_MUX_CH7;
|
|
i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, ®, 1);
|
|
reg = I2C_MUX_CH5;
|
|
i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1);
|
|
|
|
/* Access to Control/Shared register */
|
|
reg = 0x0;
|
|
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
|
|
|
|
/* Read device revision and ID */
|
|
i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1);
|
|
debug("Retimer version id = 0x%x\n", reg);
|
|
|
|
/* Enable Broadcast */
|
|
reg = 0x0c;
|
|
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
|
|
|
|
/* Reset Channel Registers */
|
|
i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1);
|
|
reg |= 0x4;
|
|
i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1);
|
|
|
|
/* Enable override divider select and Enable Override Output Mux */
|
|
i2c_read(I2C_RETIMER_ADDR, 9, 1, ®, 1);
|
|
reg |= 0x24;
|
|
i2c_write(I2C_RETIMER_ADDR, 9, 1, ®, 1);
|
|
|
|
/* Select VCO Divider to full rate (000) */
|
|
i2c_read(I2C_RETIMER_ADDR, 0x18, 1, ®, 1);
|
|
reg &= 0x8f;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x18, 1, ®, 1);
|
|
|
|
/* Select active PFD MUX input as re-timed data (001) */
|
|
i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1);
|
|
reg &= 0x3f;
|
|
reg |= 0x20;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1);
|
|
|
|
/* Set data rate as 10.3125 Gbps */
|
|
reg = 0x0;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1);
|
|
reg = 0xb2;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1);
|
|
reg = 0x90;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1);
|
|
reg = 0xb3;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1);
|
|
reg = 0xcd;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#if defined(CONFIG_DEEP_SLEEP)
|
|
if (is_warm_boot())
|
|
fsl_dp_disable_console();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FLASH_BASE
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
#endif
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
|
|
board_mux_lane_to_slot();
|
|
board_retimer_ds125df111_init();
|
|
|
|
/* Increase IO drive strength to address FCS error on RGMII */
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (sysclk_conf & 0x0F) {
|
|
case QIXIS_SYSCLK_64:
|
|
return 64000000;
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch ((ddrclk_conf & 0x30) >> 4) {
|
|
case QIXIS_DDRCLK_100:
|
|
return 100000000;
|
|
case QIXIS_DDRCLK_125:
|
|
return 125000000;
|
|
case QIXIS_DDRCLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
#define NUM_SRDS_PLL 2
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_ARCH_T1024
|
|
board_mux_setup();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
void fdt_fixup_spi_mux(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
if (hwconfig_arg_cmp("pin_mux", "tdm")) {
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"eon,en25s64")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
} else {
|
|
/* remove tdm node */
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"maxim,ds26522")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
fdt_fixup_spi_mux(blob);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void qixis_dump_switch(void)
|
|
{
|
|
int i, nr_of_cfgsw;
|
|
|
|
QIXIS_WRITE(cms[0], 0x00);
|
|
nr_of_cfgsw = QIXIS_READ(cms[1]);
|
|
|
|
puts("DIP switch settings dump:\n");
|
|
for (i = 1; i <= nr_of_cfgsw; i++) {
|
|
QIXIS_WRITE(cms[0], i);
|
|
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
|
|
}
|
|
}
|