mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 16:38:53 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
244 lines
4.8 KiB
C
244 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2006, 2007, 2010-2011 Freescale Semiconductor.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_86xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <netdev.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
phys_size_t fixed_sdram(void);
|
|
|
|
int checkboard(void)
|
|
{
|
|
u8 vboot;
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
printf ("Board: MPC8641HPCN, Sys ID: 0x%02x, "
|
|
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
|
|
in_8(pixis_base + PIXIS_PVER));
|
|
|
|
vboot = in_8(pixis_base + PIXIS_VBOOT);
|
|
if (vboot & PIXIS_VBOOT_FMAP)
|
|
printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6));
|
|
else
|
|
puts ("Promjet\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
phys_size_t dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fixed_sdram();
|
|
#endif
|
|
|
|
setup_ddr_bat(dram_size);
|
|
|
|
debug(" DDR: ");
|
|
gd->ram_size = dram_size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
phys_size_t
|
|
fixed_sdram(void)
|
|
{
|
|
#if !defined(CONFIG_SYS_RAMBOOT)
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
struct ccsr_ddr __iomem *ddr = &immap->im_ddr1;
|
|
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
|
|
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
|
|
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
|
|
ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL;
|
|
ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS;
|
|
|
|
#if defined (CONFIG_DDR_ECC)
|
|
ddr->err_disable = 0x0000008D;
|
|
ddr->err_sbe = 0x00ff0000;
|
|
#endif
|
|
asm("sync;isync");
|
|
|
|
udelay(500);
|
|
|
|
#if defined (CONFIG_DDR_ECC)
|
|
/* Enable ECC checking */
|
|
ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
|
|
#else
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
|
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
|
|
#endif
|
|
asm("sync; isync");
|
|
|
|
udelay(500);
|
|
#endif
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* Activate ULI1575 legacy chip by performing a fake
|
|
* memory access. Needed to make ULI RTC work.
|
|
*/
|
|
in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
|
|
+ CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
|
|
#endif /* CONFIG_PCIE1 */
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int off;
|
|
u64 *tmp;
|
|
int addrcells;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
/*
|
|
* Warn if it looks like the device tree doesn't match u-boot.
|
|
* This is just an estimation, based on the location of CCSR,
|
|
* which is defined by the "reg" property in the soc node.
|
|
*/
|
|
off = fdt_path_offset(blob, "/soc8641");
|
|
addrcells = fdt_address_cells(blob, 0);
|
|
tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
|
|
|
|
if (tmp) {
|
|
u64 addr;
|
|
|
|
if (addrcells == 1)
|
|
addr = *(u32 *)tmp;
|
|
else
|
|
addr = *tmp;
|
|
|
|
if (addr != CONFIG_SYS_CCSRBAR_PHYS)
|
|
printf("WARNING: The CCSRBAR address in your .dts "
|
|
"does not match the address of the CCSR "
|
|
"in u-boot. This means your .dts might "
|
|
"be old.\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*
|
|
* get_board_sys_clk
|
|
* Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
|
|
*/
|
|
|
|
unsigned long
|
|
get_board_sys_clk(ulong dummy)
|
|
{
|
|
u8 i, go_bit, rd_clks;
|
|
ulong val = 0;
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
go_bit = in_8(pixis_base + PIXIS_VCTL);
|
|
go_bit &= 0x01;
|
|
|
|
rd_clks = in_8(pixis_base + PIXIS_VCFGEN0);
|
|
rd_clks &= 0x1C;
|
|
|
|
/*
|
|
* Only if both go bit and the SCLK bit in VCFGEN0 are set
|
|
* should we be using the AUX register. Remember, we also set the
|
|
* GO bit to boot from the alternate bank on the on-board flash
|
|
*/
|
|
|
|
if (go_bit) {
|
|
if (rd_clks == 0x1c)
|
|
i = in_8(pixis_base + PIXIS_AUX);
|
|
else
|
|
i = in_8(pixis_base + PIXIS_SPD);
|
|
} else {
|
|
i = in_8(pixis_base + PIXIS_SPD);
|
|
}
|
|
|
|
i &= 0x07;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
val = 33000000;
|
|
break;
|
|
case 1:
|
|
val = 40000000;
|
|
break;
|
|
case 2:
|
|
val = 50000000;
|
|
break;
|
|
case 3:
|
|
val = 66000000;
|
|
break;
|
|
case 4:
|
|
val = 83000000;
|
|
break;
|
|
case 5:
|
|
val = 100000000;
|
|
break;
|
|
case 6:
|
|
val = 134000000;
|
|
break;
|
|
case 7:
|
|
val = 166000000;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
/* Initialize TSECs */
|
|
cpu_eth_init(bis);
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
void board_reset(void)
|
|
{
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
out_8(pixis_base + PIXIS_RST, 0);
|
|
|
|
while (1)
|
|
;
|
|
}
|