u-boot-brain/board/udoo/README
Fabio Estevam 5b0d03b306 udoo: Add a README file
Add a README file to explain how to build and flash the SD card
for Udoo boards.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-10-06 09:40:34 +02:00

22 lines
517 B
Plaintext

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------
- Build U-Boot for MX6Q/DL Udoo boards:
$ make mrproper
$ make udoo_defconfig
$ make
This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the SD card:
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- Flash the u-boot.img image into the SD card:
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
- Insert the SD card in the board, power it up and U-Boot messages should
come up.