mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-11 05:36:17 +09:00
49cdce1635
Freescale ARMv8 SoC name ends with "A" to represent ARM SoCs. like LS2080A, LS1043A, LS1012A. So append "A" to SoC names. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
344 lines
8.1 KiB
C
344 lines
8.1 KiB
C
/*
|
|
* Copyright 2014-2015 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fsl_ifc.h>
|
|
#include <ahci.h>
|
|
#include <scsi.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/arch-fsl-layerscape/config.h>
|
|
#ifdef CONFIG_SYS_FSL_DDR
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <fsl_ddr.h>
|
|
#endif
|
|
#ifdef CONFIG_CHAIN_OF_TRUST
|
|
#include <fsl_validate.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
bool soc_has_dp_ddr(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
u32 svr = gur_in32(&gur->svr);
|
|
|
|
/* LS2085A has DP_DDR */
|
|
if (SVR_SOC_VER(svr) == SVR_LS2085A)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
bool soc_has_aiop(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
u32 svr = gur_in32(&gur->svr);
|
|
|
|
/* LS2085A has AIOP */
|
|
if (SVR_SOC_VER(svr) == SVR_LS2085A)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
#ifdef CONFIG_LS2080A
|
|
/*
|
|
* This erratum requires setting a value to eddrtqcr1 to
|
|
* optimal the DDR performance.
|
|
*/
|
|
static void erratum_a008336(void)
|
|
{
|
|
u32 *eddrtqcr1;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
|
|
#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
|
|
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
|
|
out_le32(eddrtqcr1, 0x63b30002);
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
|
|
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
|
|
out_le32(eddrtqcr1, 0x63b30002);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* This erratum requires a register write before being Memory
|
|
* controller 3 being enabled.
|
|
*/
|
|
static void erratum_a008514(void)
|
|
{
|
|
u32 *eddrtqcr1;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
|
|
#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
|
|
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
|
|
out_le32(eddrtqcr1, 0x63b20002);
|
|
#endif
|
|
#endif
|
|
}
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
|
|
#define PLATFORM_CYCLE_ENV_VAR "a009635_interval_val"
|
|
|
|
static unsigned long get_internval_val_mhz(void)
|
|
{
|
|
char *interval = getenv(PLATFORM_CYCLE_ENV_VAR);
|
|
/*
|
|
* interval is the number of platform cycles(MHz) between
|
|
* wake up events generated by EPU.
|
|
*/
|
|
ulong interval_mhz = get_bus_freq(0) / (1000 * 1000);
|
|
|
|
if (interval)
|
|
interval_mhz = simple_strtoul(interval, NULL, 10);
|
|
|
|
return interval_mhz;
|
|
}
|
|
|
|
void erratum_a009635(void)
|
|
{
|
|
u32 val;
|
|
unsigned long interval_mhz = get_internval_val_mhz();
|
|
|
|
if (!interval_mhz)
|
|
return;
|
|
|
|
val = in_le32(DCSR_CGACRE5);
|
|
writel(val | 0x00000200, DCSR_CGACRE5);
|
|
|
|
val = in_le32(EPU_EPCMPR5);
|
|
writel(interval_mhz, EPU_EPCMPR5);
|
|
val = in_le32(EPU_EPCCR5);
|
|
writel(val | 0x82820000, EPU_EPCCR5);
|
|
val = in_le32(EPU_EPSMCR5);
|
|
writel(val | 0x002f0000, EPU_EPSMCR5);
|
|
val = in_le32(EPU_EPECR5);
|
|
writel(val | 0x20000000, EPU_EPECR5);
|
|
val = in_le32(EPU_EPGCR);
|
|
writel(val | 0x80000000, EPU_EPGCR);
|
|
}
|
|
#endif /* CONFIG_SYS_FSL_ERRATUM_A009635 */
|
|
|
|
static void erratum_rcw_src(void)
|
|
{
|
|
#if defined(CONFIG_SPL)
|
|
u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
|
|
u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
|
|
u32 val;
|
|
|
|
val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
|
|
val &= ~DCFG_PORSR1_RCW_SRC;
|
|
val |= DCFG_PORSR1_RCW_SRC_NOR;
|
|
out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
|
|
#endif
|
|
}
|
|
|
|
#define I2C_DEBUG_REG 0x6
|
|
#define I2C_GLITCH_EN 0x8
|
|
/*
|
|
* This erratum requires setting glitch_en bit to enable
|
|
* digital glitch filter to improve clock stability.
|
|
*/
|
|
static void erratum_a009203(void)
|
|
{
|
|
u8 __iomem *ptr;
|
|
#ifdef CONFIG_SYS_I2C
|
|
#ifdef I2C1_BASE_ADDR
|
|
ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG);
|
|
|
|
writeb(I2C_GLITCH_EN, ptr);
|
|
#endif
|
|
#ifdef I2C2_BASE_ADDR
|
|
ptr = (u8 __iomem *)(I2C2_BASE_ADDR + I2C_DEBUG_REG);
|
|
|
|
writeb(I2C_GLITCH_EN, ptr);
|
|
#endif
|
|
#ifdef I2C3_BASE_ADDR
|
|
ptr = (u8 __iomem *)(I2C3_BASE_ADDR + I2C_DEBUG_REG);
|
|
|
|
writeb(I2C_GLITCH_EN, ptr);
|
|
#endif
|
|
#ifdef I2C4_BASE_ADDR
|
|
ptr = (u8 __iomem *)(I2C4_BASE_ADDR + I2C_DEBUG_REG);
|
|
|
|
writeb(I2C_GLITCH_EN, ptr);
|
|
#endif
|
|
#endif
|
|
}
|
|
void bypass_smmu(void)
|
|
{
|
|
u32 val;
|
|
val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
|
|
out_le32(SMMU_SCR0, val);
|
|
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
|
|
out_le32(SMMU_NSCR0, val);
|
|
}
|
|
void fsl_lsch3_early_init_f(void)
|
|
{
|
|
erratum_rcw_src();
|
|
init_early_memctl_regs(); /* tighten IFC timing */
|
|
erratum_a009203();
|
|
erratum_a008514();
|
|
erratum_a008336();
|
|
#ifdef CONFIG_CHAIN_OF_TRUST
|
|
/* In case of Secure Boot, the IBR configures the SMMU
|
|
* to allow only Secure transactions.
|
|
* SMMU must be reset in bypass mode.
|
|
* Set the ClientPD bit and Clear the USFCFG Bit
|
|
*/
|
|
if (fsl_check_boot_mode_secure() == 1)
|
|
bypass_smmu();
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
int sata_init(void)
|
|
{
|
|
struct ccsr_ahci __iomem *ccsr_ahci;
|
|
|
|
ccsr_ahci = (void *)CONFIG_SYS_SATA2;
|
|
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
|
|
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
|
|
|
|
ccsr_ahci = (void *)CONFIG_SYS_SATA1;
|
|
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
|
|
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
|
|
|
|
ahci_init((void __iomem *)CONFIG_SYS_SATA1);
|
|
scsi_scan(0);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#elif defined(CONFIG_FSL_LSCH2)
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
int sata_init(void)
|
|
{
|
|
struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
|
|
|
|
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
|
|
out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
|
|
out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
|
|
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
|
|
|
|
ahci_init((void __iomem *)CONFIG_SYS_SATA);
|
|
scsi_scan(0);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void erratum_a009929(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A009929
|
|
struct ccsr_gur *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 __iomem *dcsr_cop_ccp = (void *)CONFIG_SYS_DCSR_COP_CCP_ADDR;
|
|
u32 rstrqmr1 = gur_in32(&gur->rstrqmr1);
|
|
|
|
rstrqmr1 |= 0x00000400;
|
|
gur_out32(&gur->rstrqmr1, rstrqmr1);
|
|
writel(0x01000000, dcsr_cop_ccp);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* This erratum requires setting a value to eddrtqcr1 to optimal
|
|
* the DDR performance. The eddrtqcr1 register is in SCFG space
|
|
* of LS1043A and the offset is 0x157_020c.
|
|
*/
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \
|
|
&& defined(CONFIG_SYS_FSL_ERRATUM_A008514)
|
|
#error A009660 and A008514 can not be both enabled.
|
|
#endif
|
|
|
|
static void erratum_a009660(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A009660
|
|
u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c;
|
|
out_be32(eddrtqcr1, 0x63b20042);
|
|
#endif
|
|
}
|
|
|
|
static void erratum_a008850_early(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
|
|
/* part 1 of 2 */
|
|
struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
|
|
struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
|
|
/* disables propagation of barrier transactions to DDRC from CCI400 */
|
|
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
|
|
|
|
/* disable the re-ordering in DDRC */
|
|
ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
|
|
#endif
|
|
}
|
|
|
|
void erratum_a008850_post(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
|
|
/* part 2 of 2 */
|
|
struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
|
|
struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
u32 tmp;
|
|
|
|
/* enable propagation of barrier transactions to DDRC from CCI400 */
|
|
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
|
|
|
|
/* enable the re-ordering in DDRC */
|
|
tmp = ddr_in32(&ddr->eor);
|
|
tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
|
|
ddr_out32(&ddr->eor, tmp);
|
|
#endif
|
|
}
|
|
|
|
void fsl_lsch2_early_init_f(void)
|
|
{
|
|
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
|
|
#ifdef CONFIG_FSL_IFC
|
|
init_early_memctl_regs(); /* tighten IFC timing */
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
|
|
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
|
|
#endif
|
|
/* Make SEC reads and writes snoopable */
|
|
setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
|
|
SCFG_SNPCNFGCR_SECWRSNP);
|
|
|
|
/*
|
|
* Enable snoop requests and DVM message requests for
|
|
* Slave insterface S4 (A53 core cluster)
|
|
*/
|
|
out_le32(&cci->slave[4].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
|
|
/* Erratum */
|
|
erratum_a008850_early(); /* part 1 of 2 */
|
|
erratum_a009929();
|
|
erratum_a009660();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
sata_init();
|
|
#endif
|
|
#ifdef CONFIG_CHAIN_OF_TRUST
|
|
fsl_setenv_chain_of_trust();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|