mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-10 14:53:26 +09:00
![Pankaj Bansal](/assets/img/avatar_default.png)
Till now we have had cases where we had one phy device per dpmac. Now, with the upcoming products (LX2160AQDS), we have cases, where there are sometimes two phy devices for one dpmac. One phy for TX lanes and one phy for RX lanes. to handle such cases, add the support for multiple phys in ethernet driver. The ethernet link is up if all the phy devices connected to one dpmac report link up. also the link capabilities are limited by the weakest phy device. i.e. say if there are two phys for one dpmac. one operates at 10G without autoneg and other operate at 1G with autoneg. Then the ethernet interface will operate at 1G without autoneg. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
688 lines
16 KiB
C
688 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2017 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <hwconfig.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <phy.h>
|
|
#include <fm_eth.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <fsl-mc/fsl_mc.h>
|
|
#include <fsl-mc/ldpaa_wriop.h>
|
|
|
|
#include "../common/qixis.h"
|
|
|
|
#include "ls1088a_qixis.h"
|
|
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
|
|
#define SFP_TX 0
|
|
|
|
/* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
|
|
* Bank 1 -> Lanes A, B, C, D,
|
|
* Bank 2 -> Lanes A,B, C, D,
|
|
*/
|
|
|
|
/* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
|
|
* means that the mapping must be determined dynamically, or that the lane
|
|
* maps to something other than a board slot.
|
|
*/
|
|
|
|
static u8 lane_to_slot_fsm1[] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
|
|
* housed.
|
|
*/
|
|
|
|
static int xqsgii_riser_phy_addr[] = {
|
|
XQSGMII_CARD_PHY1_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY1_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT2_ADDR,
|
|
};
|
|
|
|
static int sgmii_riser_phy_addr[] = {
|
|
SGMII_CARD_PORT1_PHY_ADDR,
|
|
SGMII_CARD_PORT2_PHY_ADDR,
|
|
SGMII_CARD_PORT3_PHY_ADDR,
|
|
SGMII_CARD_PORT4_PHY_ADDR,
|
|
};
|
|
|
|
/* Slot2 does not have EMI connections */
|
|
#define EMI_NONE 0xFF
|
|
#define EMI1_RGMII1 0
|
|
#define EMI1_RGMII2 1
|
|
#define EMI1_SLOT1 2
|
|
|
|
static const char * const mdio_names[] = {
|
|
"LS1088A_QDS_MDIO0",
|
|
"LS1088A_QDS_MDIO1",
|
|
"LS1088A_QDS_MDIO2",
|
|
DEFAULT_WRIOP_MDIO2_NAME,
|
|
};
|
|
|
|
struct ls1088a_qds_mdio {
|
|
u8 muxval;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
static void sgmii_configure_repeater(int dpmac)
|
|
{
|
|
struct mii_dev *bus;
|
|
uint8_t a = 0xf;
|
|
int i, j, ret;
|
|
unsigned short value;
|
|
const char *dev = "LS1088A_QDS_MDIO2";
|
|
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
|
int i2c_phy_addr = 0;
|
|
int phy_addr = 0;
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
/* Set I2c to Slot 1 */
|
|
i2c_write(0x77, 0, 0, &a, 1);
|
|
|
|
switch (dpmac) {
|
|
case 1:
|
|
i2c_phy_addr = i2c_addr[1];
|
|
phy_addr = 4;
|
|
break;
|
|
case 2:
|
|
i2c_phy_addr = i2c_addr[0];
|
|
phy_addr = 0;
|
|
break;
|
|
case 3:
|
|
i2c_phy_addr = i2c_addr[3];
|
|
phy_addr = 0xc;
|
|
break;
|
|
case 7:
|
|
i2c_phy_addr = i2c_addr[2];
|
|
phy_addr = 8;
|
|
break;
|
|
}
|
|
|
|
/* Check the PHY status */
|
|
ret = miiphy_set_current_dev(dev);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
bus = mdio_get_current_dev();
|
|
debug("Reading from bus %s\n", bus->name);
|
|
|
|
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
|
|
if ((value & 0xfff) == 0x401) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
a = 0x18;
|
|
i2c_write(i2c_phy_addr, 6, 1, &a, 1);
|
|
a = 0x38;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
a = 0x4;
|
|
i2c_write(i2c_phy_addr, 8, 1, &a, 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0xf, 1,
|
|
&ch_a_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x11, 1,
|
|
&ch_a_ctl2[j], 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0x16, 1,
|
|
&ch_b_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x18, 1,
|
|
&ch_b_ctl2[j], 1);
|
|
|
|
a = 0x14;
|
|
i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
|
|
a = 0xb5;
|
|
i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
|
|
a = 0x20;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
if ((value & 0xfff) == 0x401) {
|
|
printf("DPMAC %d :PHY is configured ",
|
|
dpmac);
|
|
printf("after setting repeater 0x%x\n",
|
|
value);
|
|
i = 5;
|
|
j = 5;
|
|
} else {
|
|
printf("DPMAC %d :PHY is failed to ",
|
|
dpmac);
|
|
printf("configure the repeater 0x%x\n", value);
|
|
}
|
|
}
|
|
}
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
error:
|
|
if (ret)
|
|
printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
static void qsgmii_configure_repeater(int dpmac)
|
|
{
|
|
uint8_t a = 0xf;
|
|
int i, j;
|
|
int i2c_phy_addr = 0;
|
|
int phy_addr = 0;
|
|
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
const char *dev = mdio_names[EMI1_SLOT1];
|
|
int ret = 0;
|
|
unsigned short value;
|
|
|
|
/* Set I2c to Slot 1 */
|
|
i2c_write(0x77, 0, 0, &a, 1);
|
|
|
|
switch (dpmac) {
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
case 10:
|
|
i2c_phy_addr = i2c_addr[2];
|
|
phy_addr = 8;
|
|
break;
|
|
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
i2c_phy_addr = i2c_addr[3];
|
|
phy_addr = 0xc;
|
|
break;
|
|
}
|
|
|
|
/* Check the PHY status */
|
|
ret = miiphy_set_current_dev(dev);
|
|
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
a = 0x18;
|
|
i2c_write(i2c_phy_addr, 6, 1, &a, 1);
|
|
a = 0x38;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
a = 0x4;
|
|
i2c_write(i2c_phy_addr, 8, 1, &a, 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
|
|
|
|
a = 0x14;
|
|
i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
|
|
a = 0xb5;
|
|
i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
|
|
a = 0x20;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(1);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d :PHY is ..... Configured\n",
|
|
dpmac);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
error:
|
|
printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
|
|
{
|
|
return mdio_names[muxval];
|
|
}
|
|
|
|
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
|
{
|
|
struct mii_dev *bus;
|
|
const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
|
|
|
|
if (!name) {
|
|
printf("No bus for muxval %x\n", muxval);
|
|
return NULL;
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name(name);
|
|
|
|
if (!bus) {
|
|
printf("No bus by name %s\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
static void ls1088a_qds_enable_SFP_TX(u8 muxval)
|
|
{
|
|
u8 brdcfg9;
|
|
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
|
|
brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
|
}
|
|
|
|
static void ls1088a_qds_mux_mdio(u8 muxval)
|
|
{
|
|
u8 brdcfg4;
|
|
|
|
if (muxval <= 5) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
|
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
|
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
|
}
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
|
|
int devad, int regnum)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
ls1088a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
ls1088a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
|
|
{
|
|
struct ls1088a_qds_mdio *pmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate ls1088a_qds MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
pmdio = malloc(sizeof(*pmdio));
|
|
if (!pmdio) {
|
|
printf("Failed to allocate ls1088a_qds private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = ls1088a_qds_mdio_read;
|
|
bus->write = ls1088a_qds_mdio_write;
|
|
bus->reset = ls1088a_qds_mdio_reset;
|
|
sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
|
|
|
|
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!pmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(pmdio);
|
|
return -1;
|
|
}
|
|
|
|
pmdio->muxval = muxval;
|
|
bus->priv = pmdio;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
/*
|
|
* Initialize the dpmac_info array.
|
|
*
|
|
*/
|
|
static void initialize_dpmac_to_slot(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x12:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
|
break;
|
|
case 0x15:
|
|
case 0x1D:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI_NONE;
|
|
lane_to_slot_fsm1[3] = EMI_NONE;
|
|
break;
|
|
case 0x1E:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI_NONE;
|
|
break;
|
|
case 0x3A:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI_NONE;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
|
break;
|
|
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__, serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
|
|
{
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
int *riser_phy_addr;
|
|
char *env_hwconfig = env_get("hwconfig");
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig))
|
|
riser_phy_addr = &xqsgii_riser_phy_addr[0];
|
|
else
|
|
riser_phy_addr = &sgmii_riser_phy_addr[0];
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x12:
|
|
case 0x15:
|
|
case 0x1E:
|
|
case 0x3A:
|
|
switch (dpmac_id) {
|
|
case 1:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]);
|
|
break;
|
|
case 2:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]);
|
|
break;
|
|
case 3:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]);
|
|
break;
|
|
case 7:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]);
|
|
break;
|
|
default:
|
|
printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__, serdes1_prtcl);
|
|
return;
|
|
}
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
|
|
{
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x1D:
|
|
case 0x1E:
|
|
switch (dpmac_id) {
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9);
|
|
break;
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
case 10:
|
|
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1);
|
|
break;
|
|
}
|
|
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_xsgmii(int i)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x15:
|
|
case 0x1D:
|
|
case 0x1E:
|
|
wriop_set_phy_address(i, 0, i + 26);
|
|
ls1088a_qds_enable_SFP_TX(SFP_TX);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
struct mii_dev *bus;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (dpmac_id) {
|
|
case 4:
|
|
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
|
|
bus = mii_dev_for_muxval(EMI1_RGMII1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
case 5:
|
|
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
|
|
bus = mii_dev_for_muxval(EMI1_RGMII2);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int error = 0, i;
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
struct memac_mdio_info *memac_mdio0_info;
|
|
char *env_hwconfig = env_get("hwconfig");
|
|
|
|
initialize_dpmac_to_slot();
|
|
|
|
memac_mdio0_info = (struct memac_mdio_info *)malloc(
|
|
sizeof(struct memac_mdio_info));
|
|
memac_mdio0_info->regs =
|
|
(struct memac_mdio_controller *)
|
|
CONFIG_SYS_FSL_WRIOP1_MDIO1;
|
|
memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
|
|
|
|
/* Register the real MDIO1 bus */
|
|
fm_memac_mdio_init(bis, memac_mdio0_info);
|
|
/* Register the muxing front-ends to the MDIO buses */
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
|
|
|
|
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
|
switch (wriop_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
ls1088a_handle_phy_interface_rgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
ls1088a_handle_phy_interface_qsgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
ls1088a_handle_phy_interface_sgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
ls1088a_handle_phy_interface_xsgmii(i);
|
|
break;
|
|
default:
|
|
break;
|
|
|
|
if (i == 16)
|
|
i = NUM_WRIOP_PORTS;
|
|
}
|
|
}
|
|
|
|
error = cpu_eth_init(bis);
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
|
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
|
switch (wriop_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
qsgmii_configure_repeater(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
sgmii_configure_repeater(i);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (i == 16)
|
|
i = NUM_WRIOP_PORTS;
|
|
}
|
|
}
|
|
#endif
|
|
error = pci_eth_init(bis);
|
|
return error;
|
|
}
|
|
|
|
#if defined(CONFIG_RESET_PHY_R)
|
|
void reset_phy(void)
|
|
{
|
|
mc_env_boot();
|
|
}
|
|
#endif /* CONFIG_RESET_PHY_R */
|