mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-06 04:43:21 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
457 lines
13 KiB
C
457 lines
13 KiB
C
/*
|
|
* (C) Copyright 2000-2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/gpio.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PLL_RECONFIG
|
|
#define CONFIG_SYS_PLL_RECONFIG 0
|
|
#endif
|
|
|
|
void reconfigure_pll(u32 new_cpu_freq)
|
|
{
|
|
#if defined(CONFIG_440EPX)
|
|
int reset_needed = 0;
|
|
u32 reg, temp;
|
|
u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
|
|
fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
|
|
fbdv, target_fbdv, lfbdv, target_lfbdv,
|
|
perdv0, target_perdv0, /* CLK_PERD */
|
|
spcid0, target_spcid0; /* CLK_SPCID */
|
|
|
|
/* Reconfigure clocks if necessary.
|
|
* See PPC440EPx User's Manual, sections 8.2 and 14 */
|
|
if (new_cpu_freq == 667) {
|
|
target_prbdv0 = 2;
|
|
target_fwdva = 2;
|
|
target_fwdvb = 4;
|
|
target_fbdv = 20;
|
|
target_lfbdv = 1;
|
|
target_perdv0 = 4;
|
|
target_spcid0 = 4;
|
|
|
|
mfcpr(CPR0_PRIMBD0, reg);
|
|
temp = (reg & PRBDV_MASK) >> 24;
|
|
prbdv0 = temp ? temp : 8;
|
|
if (prbdv0 != target_prbdv0) {
|
|
reg &= ~PRBDV_MASK;
|
|
reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
|
|
mtcpr(CPR0_PRIMBD0, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(CPR0_PLLD, reg);
|
|
|
|
temp = (reg & PLLD_FWDVA_MASK) >> 16;
|
|
fwdva = temp ? temp : 16;
|
|
|
|
temp = (reg & PLLD_FWDVB_MASK) >> 8;
|
|
fwdvb = temp ? temp : 8;
|
|
|
|
temp = (reg & PLLD_FBDV_MASK) >> 24;
|
|
fbdv = temp ? temp : 32;
|
|
|
|
temp = (reg & PLLD_LFBDV_MASK);
|
|
lfbdv = temp ? temp : 64;
|
|
|
|
if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
|
|
reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
|
|
PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
|
|
reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
|
|
((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
|
|
((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
|
|
(target_lfbdv == 64 ? 0 : target_lfbdv);
|
|
mtcpr(CPR0_PLLD, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(CPR0_PERD, reg);
|
|
perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
|
|
if (perdv0 != target_perdv0) {
|
|
reg &= ~CPR0_PERD_PERDV0_MASK;
|
|
reg |= (target_perdv0 << 24);
|
|
mtcpr(CPR0_PERD, reg);
|
|
reset_needed = 1;
|
|
}
|
|
|
|
mfcpr(CPR0_SPCID, reg);
|
|
temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
|
|
spcid0 = temp ? temp : 4;
|
|
if (spcid0 != target_spcid0) {
|
|
reg &= ~CPR0_SPCID_SPCIDV0_MASK;
|
|
reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
|
|
mtcpr(CPR0_SPCID, reg);
|
|
reset_needed = 1;
|
|
}
|
|
}
|
|
|
|
/* Get current value of FWDVA.*/
|
|
mfcpr(CPR0_PLLD, reg);
|
|
temp = (reg & PLLD_FWDVA_MASK) >> 16;
|
|
|
|
/*
|
|
* Check to see if FWDVA has been set to value of 1. if it has we must
|
|
* modify it.
|
|
*/
|
|
if (temp == 1) {
|
|
mfcpr(CPR0_PLLD, reg);
|
|
/* Get current value of fbdv. */
|
|
temp = (reg & PLLD_FBDV_MASK) >> 24;
|
|
fbdv = temp ? temp : 32;
|
|
/* Get current value of lfbdv. */
|
|
temp = (reg & PLLD_LFBDV_MASK);
|
|
lfbdv = temp ? temp : 64;
|
|
/*
|
|
* Load register that contains current boot strapping option.
|
|
*/
|
|
mfcpr(CPR0_ICFG, reg);
|
|
/* Shift strapping option into low 3 bits.*/
|
|
reg = (reg >> 28);
|
|
|
|
if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
|
|
(reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
|
|
/*
|
|
* Get current value of FWDVA. Assign current FWDVA to
|
|
* new FWDVB.
|
|
*/
|
|
mfcpr(CPR0_PLLD, reg);
|
|
target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
|
|
fwdvb = target_fwdvb ? target_fwdvb : 8;
|
|
/*
|
|
* Get current value of FWDVB. Assign current FWDVB to
|
|
* new FWDVA.
|
|
*/
|
|
target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
|
|
fwdva = target_fwdva ? target_fwdva : 16;
|
|
/*
|
|
* Update CPR0_PLLD with switched FWDVA and FWDVB.
|
|
*/
|
|
reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
|
|
PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
|
|
reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
|
|
((fwdvb == 8 ? 0 : fwdvb) << 8) |
|
|
((fbdv == 32 ? 0 : fbdv) << 24) |
|
|
(lfbdv == 64 ? 0 : lfbdv);
|
|
mtcpr(CPR0_PLLD, reg);
|
|
/* Acknowledge that a reset is required. */
|
|
reset_needed = 1;
|
|
}
|
|
}
|
|
|
|
if (reset_needed) {
|
|
/*
|
|
* Set reload inhibit so configuration will persist across
|
|
* processor resets
|
|
*/
|
|
mfcpr(CPR0_ICFG, reg);
|
|
reg &= ~CPR0_ICFG_RLI_MASK;
|
|
reg |= 1 << 31;
|
|
mtcpr(CPR0_ICFG, reg);
|
|
|
|
/* Reset processor if configuration changed */
|
|
__asm__ __volatile__ ("sync; isync");
|
|
mtspr(SPRN_DBCR0, 0x20000000);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Reconfigure PLL if necessary,
|
|
* set up the memory map,
|
|
* initialize a bunch of registers
|
|
*/
|
|
void
|
|
cpu_init_f (void)
|
|
{
|
|
#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
|
|
u32 val;
|
|
#endif
|
|
|
|
reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
|
|
|
|
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
|
|
/*
|
|
* GPIO0 setup (select GPIO or alternate function)
|
|
*/
|
|
#if defined(CONFIG_SYS_GPIO0_OR)
|
|
out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
|
|
#endif
|
|
#if defined(CONFIG_SYS_GPIO0_ODR)
|
|
out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
|
|
#endif
|
|
out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
|
|
out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
|
|
out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
|
|
out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
|
|
out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
|
|
out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
|
|
#if defined(CONFIG_SYS_GPIO0_ISR2H)
|
|
out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
|
|
out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
|
|
#endif
|
|
#if defined (CONFIG_SYS_GPIO0_TCR)
|
|
out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
|
|
#endif
|
|
#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
|
|
|
|
#if defined (CONFIG_405EP)
|
|
/*
|
|
* Set EMAC noise filter bits
|
|
*/
|
|
mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
|
|
#endif /* CONFIG_405EP */
|
|
|
|
#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
|
|
gpio_set_chip_configuration();
|
|
#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
|
|
|
|
/*
|
|
* External Bus Controller (EBC) Setup
|
|
*/
|
|
#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
|
|
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
|
|
defined(CONFIG_405EX) || defined(CONFIG_405))
|
|
/*
|
|
* Move the next instructions into icache, since these modify the flash
|
|
* we are running from!
|
|
*/
|
|
asm volatile(" bl 0f" ::: "lr");
|
|
asm volatile("0: mflr 3" ::: "r3");
|
|
asm volatile(" addi 4, 0, 14" ::: "r4");
|
|
asm volatile(" mtctr 4" ::: "ctr");
|
|
asm volatile("1: icbt 0, 3");
|
|
asm volatile(" addi 3, 3, 32" ::: "r3");
|
|
asm volatile(" bdnz 1b" ::: "ctr", "cr0");
|
|
asm volatile(" addis 3, 0, 0x0" ::: "r3");
|
|
asm volatile(" ori 3, 3, 0xA000" ::: "r3");
|
|
asm volatile(" mtctr 3" ::: "ctr");
|
|
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
|
|
#endif
|
|
|
|
mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
|
|
mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
|
|
mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
|
|
mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
|
|
mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
|
|
mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
|
|
mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
|
|
mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
|
|
mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
|
|
mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
|
|
mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
|
|
mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
|
|
mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
|
|
mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
|
|
mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
|
|
mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
|
|
#endif
|
|
|
|
#if defined (CONFIG_SYS_EBC_CFG)
|
|
mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
|
|
#endif
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
val = mfspr(tcr);
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
|
|
#elif defined(CONFIG_440EPX)
|
|
val |= 0xb0000000; /* generate system reset after 1.34 seconds */
|
|
#else
|
|
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
|
|
#endif
|
|
#if defined(CONFIG_SYS_4xx_RESET_TYPE)
|
|
val &= ~0x30000000; /* clear WRC bits */
|
|
val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
|
|
#endif
|
|
mtspr(tcr, val);
|
|
|
|
val = mfspr(tsr);
|
|
val |= 0x80000000; /* enable watchdog timer */
|
|
mtspr(tsr, val);
|
|
|
|
reset_4xx_watchdog();
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
#if defined(CONFIG_440GX)
|
|
/* Take the GX out of compatibility mode
|
|
* Travis Sawyer, 9 Mar 2004
|
|
* NOTE: 440gx user manual inconsistency here
|
|
* Compatibility mode and Ethernet Clock select are not
|
|
* correct in the manual
|
|
*/
|
|
mfsdr(SDR0_MFR, val);
|
|
val &= ~0x10000000;
|
|
mtsdr(SDR0_MFR,val);
|
|
#endif /* CONFIG_440GX */
|
|
|
|
#if defined(CONFIG_460EX)
|
|
/*
|
|
* Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
|
|
* clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
|
|
* regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
|
|
*/
|
|
mfsdr(SDR0_AHB_CFG, val);
|
|
val |= 0x80;
|
|
val &= ~0x40;
|
|
mtsdr(SDR0_AHB_CFG, val);
|
|
mfsdr(SDR0_USB2HOST_CFG, val);
|
|
val &= ~0xf00;
|
|
val |= 0x400;
|
|
mtsdr(SDR0_USB2HOST_CFG, val);
|
|
#endif /* CONFIG_460EX */
|
|
|
|
#if defined(CONFIG_405EX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
|
|
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
|
|
defined(CONFIG_460SX)
|
|
/*
|
|
* Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
|
|
*/
|
|
mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
|
|
PLB0_ACR_RDP_4DEEP);
|
|
mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
|
|
PLB1_ACR_RDP_4DEEP);
|
|
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like time base and timers
|
|
*/
|
|
int cpu_init_r (void)
|
|
{
|
|
#if defined(CONFIG_405GP)
|
|
uint pvr = get_pvr();
|
|
|
|
/*
|
|
* Set edge conditioning circuitry on PPC405GPr
|
|
* for compatibility to existing PPC405GP designs.
|
|
*/
|
|
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
|
|
mtdcr(CPC0_ECR, 0x60606000);
|
|
}
|
|
#endif /* defined(CONFIG_405GP) */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_PCI) && \
|
|
(defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
|
|
defined(CONFIG_440GR) || defined(CONFIG_440GRX))
|
|
/*
|
|
* 440EP(x)/GR(x) PCI async/sync clocking restriction:
|
|
*
|
|
* In asynchronous PCI mode, the synchronous PCI clock must meet
|
|
* certain requirements. The following equation describes the
|
|
* relationship that must be maintained between the asynchronous PCI
|
|
* clock and synchronous PCI clock. Select an appropriate PCI:PLB
|
|
* ratio to maintain the relationship:
|
|
*
|
|
* AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
|
|
*/
|
|
static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
|
|
{
|
|
if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
int ppc4xx_pci_sync_clock_config(u32 async)
|
|
{
|
|
sys_info_t sys_info;
|
|
u32 sync;
|
|
int div;
|
|
u32 reg;
|
|
u32 spcid_val[] = {
|
|
CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
|
|
CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
|
|
|
|
get_sys_info(&sys_info);
|
|
sync = sys_info.freqPCI;
|
|
|
|
/*
|
|
* First check if the equation above is met
|
|
*/
|
|
if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
|
|
/*
|
|
* Reconfigure PCI sync clock to meet the equation.
|
|
* Start with highest possible PCI sync frequency
|
|
* (divider 1).
|
|
*/
|
|
for (div = 1; div <= 4; div++) {
|
|
sync = sys_info.freqPLB / div;
|
|
if (ppc4xx_pci_sync_clock_ok(sync, async))
|
|
break;
|
|
}
|
|
|
|
if (div <= 4) {
|
|
mtcpr(CPR0_SPCID, spcid_val[div]);
|
|
|
|
mfcpr(CPR0_ICFG, reg);
|
|
reg |= CPR0_ICFG_RLI_MASK;
|
|
mtcpr(CPR0_ICFG, reg);
|
|
|
|
/* do chip reset */
|
|
mtspr(SPRN_DBCR0, 0x20000000);
|
|
} else {
|
|
/* Impossible to configure the PCI sync clock */
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|