u-boot-brain/drivers/misc/fsl_sec_mon.c
gaurav rana fe78378d7d fsl_sec_mon: Add driver for Security Monitor block of Freescale
The Security Monitor is the SOC’s central reporting point for
security-relevant events such as the success or failure of boot
software validation and the detection of potential security compromises.

The API's for transition of Security states have been added
which will be used in case of SECURE BOOT.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-05 12:04:59 -08:00

147 lines
2.9 KiB
C

/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fsl_sec_mon.h>
int change_sec_mon_state(u32 initial_state, u32 final_state)
{
struct ccsr_sec_mon_regs *sec_mon_regs = (void *)
(CONFIG_SYS_SEC_MON_ADDR);
u32 sts = sec_mon_in32(&sec_mon_regs->hp_stat);
int timeout = 10;
if ((sts & HPSR_SSM_ST_MASK) != initial_state)
return -1;
if (initial_state == HPSR_SSM_ST_TRUST) {
switch (final_state) {
case HPSR_SSM_ST_NON_SECURE:
printf("SEC_MON state transitioning to Soft Fail.\n");
sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_SV);
/*
* poll till SEC_MON is in
* Soft Fail state
*/
while (((sts & HPSR_SSM_ST_MASK) !=
HPSR_SSM_ST_SOFT_FAIL)) {
while (timeout) {
sts = sec_mon_in32
(&sec_mon_regs->hp_stat);
if ((sts & HPSR_SSM_ST_MASK) ==
HPSR_SSM_ST_SOFT_FAIL)
break;
udelay(10);
timeout--;
}
}
if (timeout == 0) {
printf("SEC_MON state transition timeout.\n");
return -1;
}
timeout = 10;
printf("SEC_MON state transitioning to Non Secure.\n");
sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SSM_ST);
/*
* poll till SEC_MON is in
* Non Secure state
*/
while (((sts & HPSR_SSM_ST_MASK) !=
HPSR_SSM_ST_NON_SECURE)) {
while (timeout) {
sts = sec_mon_in32
(&sec_mon_regs->hp_stat);
if ((sts & HPSR_SSM_ST_MASK) ==
HPSR_SSM_ST_NON_SECURE)
break;
udelay(10);
timeout--;
}
}
if (timeout == 0) {
printf("SEC_MON state transition timeout.\n");
return -1;
}
break;
case HPSR_SSM_ST_SOFT_FAIL:
printf("SEC_MON state transitioning to Soft Fail.\n");
sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_FSV);
/*
* polling loop till SEC_MON is in
* Soft Fail state
*/
while (((sts & HPSR_SSM_ST_MASK) !=
HPSR_SSM_ST_SOFT_FAIL)) {
while (timeout) {
sts = sec_mon_in32
(&sec_mon_regs->hp_stat);
if ((sts & HPSR_SSM_ST_MASK) ==
HPSR_SSM_ST_SOFT_FAIL)
break;
udelay(10);
timeout--;
}
}
if (timeout == 0) {
printf("SEC_MON state transition timeout.\n");
return -1;
}
break;
default:
return -1;
}
} else if (initial_state == HPSR_SSM_ST_NON_SECURE) {
switch (final_state) {
case HPSR_SSM_ST_SOFT_FAIL:
printf("SEC_MON state transitioning to Soft Fail.\n");
sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_FSV);
/*
* polling loop till SEC_MON is in
* Soft Fail state
*/
while (((sts & HPSR_SSM_ST_MASK) !=
HPSR_SSM_ST_SOFT_FAIL)) {
while (timeout) {
sts = sec_mon_in32
(&sec_mon_regs->hp_stat);
if ((sts & HPSR_SSM_ST_MASK) ==
HPSR_SSM_ST_SOFT_FAIL)
break;
udelay(10);
timeout--;
}
}
if (timeout == 0) {
printf("SEC_MON state transition timeout.\n");
return -1;
}
break;
default:
return -1;
}
}
return 0;
}