u-boot-brain/drivers/usb/host
Rajesh Bhagat 5955bb9345 usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook
As per dwc3 databook, delay is required before taking the core out of reset.
This delay is required so that the PHY are stable, and then we can take core
out of reset.

Reference is taken from linux dwc3 code, file: drivers/usb/dwc3/core.c.

Signed-off-by: Sriram Dash <sriram.dash@freescale.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
2015-12-07 00:15:00 +01:00
..
dwc2.c Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header 2015-09-11 17:15:20 -04:00
dwc2.h usb: dwc2: Add support for v3 snpsid value 2015-05-29 12:41:04 +02:00
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c USB: ehci-atmel: use pcr to enable or disable clock 2014-09-19 00:11:21 +02:00
ehci-exynos.c dm: usb: exynos: Drop legacy USB code 2015-05-06 14:00:35 -06:00
ehci-faraday.c dm: usb: Drop the EHCI weak functions 2015-04-18 11:11:24 -06:00
ehci-fsl.c drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect 2015-06-07 15:46:02 +02:00
ehci-generic.c usb: add support for generic EHCI devices 2015-12-07 00:14:59 +01:00
ehci-hcd.c dm: Rename dev_get_parentdata() to dev_get_parent_priv() 2015-10-23 09:42:28 -06:00
ehci-marvell.c usb: ehci-marvell.c: Add DM support 2015-10-21 02:25:01 +02:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c dm: usb: Drop the EHCI weak functions 2015-04-18 11:11:24 -06:00
ehci-mx6.c imx: usb: ehci-mx6: wait_for_bit to check reg status 2015-08-19 22:30:20 +02:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci: mxs: Add board-specific callbacks 2014-09-29 09:02:16 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c dm: usb: Add driver-model support to ehci-pci 2015-07-21 17:39:40 -06:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-rmobile.c usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT 2014-11-07 16:32:02 +01:00
ehci-spear.c usb: spear: Add support for both SPEAr600 EHCI controllers 2015-08-19 22:30:20 +02:00
ehci-sunxi.c sunxi: usb: Rename the sunxi usb driver DM entry 2015-12-07 00:14:59 +01:00
ehci-tegra.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
ehci-uniphier.c ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 2015-05-31 02:53:56 +09:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-vf.c usb: ehci-vf: Add weak function for board specific initialisation 2015-06-08 08:41:56 +02:00
ehci-zynq.c ARM: zynq: ehci: Added USB host driver support 2014-05-14 07:43:35 +02:00
ehci.h usb: ehci: remember init mode 2015-09-07 13:41:05 +02:00
isp116x-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Kconfig usb: add support for generic EHCI devices 2015-12-07 00:14:59 +01:00
Makefile usb: add support for generic EHCI devices 2015-12-07 00:14:59 +01:00
ohci-at91.c USB: ohci-at91: use pcr to enable or disable clock 2014-09-19 00:11:20 +02:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-ep93xx.c arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
ohci-hcd.c ohci: Add missing cache-flush for hcca area 2015-11-03 17:29:33 +01:00
ohci-lpc32xx.c usb: lpc32xx: add host USB driver 2015-08-18 13:45:57 -04:00
ohci-s3c24xx.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci-sunxi.c sunxi: usb-phy: Never power off the usb ports 2015-08-08 16:26:19 +02:00
ohci.h usb: ohci: enable cache support 2015-08-12 20:47:48 -04:00
r8a66597-hcd.c Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
r8a66597.h usb: Update some EHCI driver licenses to use SPDX 2015-07-21 17:39:38 -06:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
usb-sandbox.c usb: sandbox: Add support for interrupt operations 2015-11-19 20:27:52 -07:00
usb-uclass.c dm: usb: Remove inactive children after a bus scan 2015-11-19 20:27:52 -07:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-dwc3.c usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook 2015-12-07 00:15:00 +01:00
xhci-exynos5.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
xhci-fsl.c drivers: usb: fsl: Remove LS102XA immap inclusion 2015-07-22 08:55:45 +02:00
xhci-keystone.c usb: xhci: keystone: Remove common dwc3 drv functions calls 2015-07-22 08:55:44 +02:00
xhci-mem.c dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00
xhci-omap.c usb: host: xhci-omap: fix build break 2015-12-07 00:14:59 +01:00
xhci-pci.c usb: pci: Add XHCI driver for PCI 2015-02-05 22:16:42 -07:00
xhci-ring.c dm: usb: xhci: Use a function to get xhci_ctrl 2015-04-18 11:11:28 -06:00
xhci-uniphier.c ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 2015-05-31 02:53:56 +09:00
xhci-zynqmp.c usb: zynqmp: Fix build warnings 2015-12-07 00:14:59 +01:00
xhci.c dm: Rename dev_get_parentdata() to dev_get_parent_priv() 2015-10-23 09:42:28 -06:00
xhci.h dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00