brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-06 19:26:16 +09:00
Code Issues Projects Releases Wiki Activity
58ec0aa361
u-boot-brain/board/freescale/mx6qarm2/imximage_mx6dl.cfg
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

462 lines
12 KiB
INI
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*
* Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
#ifdef CONFIG_MX6DL_LPDDR2
/* IOMUX SETTINGS */
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 */
DATA 4 0x020E04bc 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 */
DATA 4 0x020E04c0 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 */
DATA 4 0x020E04c4 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 */
DATA 4 0x020E04c8 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 */
DATA 4 0x020E04cc 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 */
DATA 4 0x020E04d0 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 */
DATA 4 0x020E04d4 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7 */
DATA 4 0x020E04d8 0x00003028
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */
DATA 4 0x020E0470 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */
DATA 4 0x020E0474 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2 */
DATA 4 0x020E0478 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3 */
DATA 4 0x020E047c 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM4 */
DATA 4 0x020E0480 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM5 */
DATA 4 0x020E0484 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM6 */
DATA 4 0x020E0488 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM7 */
DATA 4 0x020E048c 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */
DATA 4 0x020E0464 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */
DATA 4 0x020E0490 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 */
DATA 4 0x020E04ac 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 */
DATA 4 0x020E04b0 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */
DATA 4 0x020E0494 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE0 */
DATA 4 0x020E04a4 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE1 */
DATA 4 0x020E04a8 0x00000038
/*
* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2
* DSE can be configured using Group Control Register:
* IOMUXC_SW_PAD_CTL_GRP_CTLDS
*/
DATA 4 0x020E04a0 0x00000000
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 */
DATA 4 0x020E04b4 0x00000038
/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 */
DATA 4 0x020E04b8 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B0DS */
DATA 4 0x020E0764 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B1DS */
DATA 4 0x020E0770 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B2DS */
DATA 4 0x020E0778 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B3DS */
DATA 4 0x020E077c 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B4DS */
DATA 4 0x020E0780 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B5DS */
DATA 4 0x020E0784 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B6DS */
DATA 4 0x020E078c 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_B7DS */
DATA 4 0x020E0748 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_ADDDS */
DATA 4 0x020E074c 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_CTLDS */
DATA 4 0x020E076c 0x00000038
/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */
DATA 4 0x020E0750 0x00020000
/* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */
DATA 4 0x020E0754 0x00000000
/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */
DATA 4 0x020E0760 0x00020000
/* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */
DATA 4 0x020E0774 0x00080000
/*
* DDR Controller Registers
*
* Manufacturer: Mocron
* Device Part Number: MT42L64M64D2KH-18
* Clock Freq.: 528MHz
* MMDC channels: Both MMDC0, MMDC1
*Density per CS in Gb: 256M
* Chip Selects used: 2
* Number of Banks: 8
* Row address: 14
* Column address: 9
* Data bus width 32
*/
/* MMDC_P0_BASE_ADDR = 0x021b0000 */
/* MMDC_P1_BASE_ADDR = 0x021b4000 */
/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */
DATA 4 0x021b001c 0x00008000
/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */
DATA 4 0x021b401c 0x00008000
/*LPDDR2 ZQ params */
DATA 4 0x021b085c 0x1b5f01ff
DATA 4 0x021b485c 0x1b5f01ff
/* Calibration setup. */
/* DDR_PHY_P0_MPZQHWCTRL, enable on time ZQ calibration */
DATA 4 0x021b0800 0xa1390003
/*ca bus abs delay */
DATA 4 0x021b0890 0x00400000
/*ca bus abs delay */
DATA 4 0x021b4890 0x00400000
/* values of 20,40,50,60,7f tried. no difference seen */
/* DDR_PHY_P1_MPWRCADL */
DATA 4 0x021b48bc 0x00055555
/*frc_msr.*/
DATA 4 0x021b08b8 0x00000800
/*frc_msr.*/
DATA 4 0x021b48b8 0x00000800
/* DDR_PHY_P0_MPREDQBY0DL3 */
DATA 4 0x021b081c 0x33333333
/* DDR_PHY_P0_MPREDQBY1DL3 */
DATA 4 0x021b0820 0x33333333
/* DDR_PHY_P0_MPREDQBY2DL3 */
DATA 4 0x021b0824 0x33333333
/* DDR_PHY_P0_MPREDQBY3DL3 */
DATA 4 0x021b0828 0x33333333
/* DDR_PHY_P1_MPREDQBY0DL3 */
DATA 4 0x021b481c 0x33333333
/* DDR_PHY_P1_MPREDQBY1DL3 */
DATA 4 0x021b4820 0x33333333
/* DDR_PHY_P1_MPREDQBY2DL3 */
DATA 4 0x021b4824 0x33333333
/* DDR_PHY_P1_MPREDQBY3DL3 */
DATA 4 0x021b4828 0x33333333
/*
* Read and write data delay, per byte.
* For optimized DDR operation it is recommended to run mmdc_calibration
* on your board, and replace 4 delay register assigns with resulted values
* Note:
* a. DQS gating is not relevant for LPDDR2. DSQ gating calibration section
* should be skipped, or the write/read calibration comming after that
* will stall
* b. The calibration code that runs for both MMDC0 & MMDC1 should be used.
*/
DATA 4 0x021b0848 0x4b4b524f
DATA 4 0x021b4848 0x494f4c44
DATA 4 0x021b0850 0x3c3d303c
DATA 4 0x021b4850 0x3c343d38
/*dqs gating dis */
DATA 4 0x021b083c 0x20000000
DATA 4 0x021b0840 0x0
DATA 4 0x021b483c 0x20000000
DATA 4 0x021b4840 0x0
/*clk delay */
DATA 4 0x021b0858 0xa00
/*clk delay */
DATA 4 0x021b4858 0xa00
/*frc_msr */
DATA 4 0x021b08b8 0x00000800
/*frc_msr */
DATA 4 0x021b48b8 0x00000800
/* Calibration setup end */
/* Channel0 - startng address 0x80000000 */
/* MMDC0_MDCFG0 */
DATA 4 0x021b000c 0x34386145
/* MMDC0_MDPDC */
DATA 4 0x021b0004 0x00020036
/* MMDC0_MDCFG1 */
DATA 4 0x021b0010 0x00100c83
/* MMDC0_MDCFG2 */
DATA 4 0x021b0014 0x000000Dc
/* MMDC0_MDMISC */
DATA 4 0x021b0018 0x0000174C
/* MMDC0_MDRWD;*/
DATA 4 0x021b002c 0x0f9f26d2
/* MMDC0_MDOR */
DATA 4 0x021b0030 0x009f0e10
/* MMDC0_MDCFG3LP */
DATA 4 0x021b0038 0x00190778
/* MMDC0_MDOTC */
DATA 4 0x021b0008 0x00000000
/* CS0_END */
DATA 4 0x021b0040 0x0000005f
/* ROC */
DATA 4 0x021b0404 0x0000000f
/* MMDC0_MDCTL */
DATA 4 0x021b0000 0xc3010000
/* Channel1 - starting address 0x10000000 */
/* MMDC1_MDCFG0 */
DATA 4 0x021b400c 0x34386145
/* MMDC1_MDPDC */
DATA 4 0x021b4004 0x00020036
/* MMDC1_MDCFG1 */
DATA 4 0x021b4010 0x00100c83
/* MMDC1_MDCFG2 */
DATA 4 0x021b4014 0x000000Dc
/* MMDC1_MDMISC */
DATA 4 0x021b4018 0x0000174C
/* MMDC1_MDRWD;*/
DATA 4 0x021b402c 0x0f9f26d2
/* MMDC1_MDOR */
DATA 4 0x021b4030 0x009f0e10
/* MMDC1_MDCFG3LP */
DATA 4 0x021b4038 0x00190778
/* MMDC1_MDOTC */
DATA 4 0x021b4008 0x00000000
/* CS0_END */
DATA 4 0x021b4040 0x0000003f
/* MMDC1_MDCTL */
DATA 4 0x021b4000 0xc3010000
/* Channel0 : Configure DDR device:*/
/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */
DATA 4 0x021b001c 0x003f8030
/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */
DATA 4 0x021b001c 0xff0a8030
/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */
DATA 4 0x021b001c 0xa2018030
/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */
DATA 4 0x021b001c 0x06028030
/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */
DATA 4 0x021b001c 0x01038030
/* Channel1 : Configure DDR device:*/
/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */
DATA 4 0x021b401c 0x003f8030
/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */
DATA 4 0x021b401c 0xff0a8030
/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */
DATA 4 0x021b401c 0xa2018030
/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */
DATA 4 0x021b401c 0x06028030
/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */
DATA 4 0x021b401c 0x01038030
/* MMDC0_MDREF */
DATA 4 0x021b0020 0x00005800
/* MMDC1_MDREF */
DATA 4 0x021b4020 0x00005800
/* DDR_PHY_P0_MPODTCTRL */
DATA 4 0x021b0818 0x0
/* DDR_PHY_P1_MPODTCTRL */
DATA 4 0x021b4818 0x0
/*
* calibration values based on calibration compare of 0x00ffff00:
* Note, these calibration values are based on Freescale's board
* May need to run calibration on target board to fine tune these
*/
/* DDR_PHY_P0_MPZQHWCTRL, enable automatic ZQ calibration */
DATA 4 0x021b0800 0xa1310003
/* DDR_PHY_P0_MPMUR0, frc_msr */
DATA 4 0x021b08b8 0x00000800
/* DDR_PHY_P1_MPMUR0, frc_msr */
DATA 4 0x021b48b8 0x00000800
/*
* MMDC0_MDSCR, clear this register
* (especially the configuration bit as initialization is complete)
*/
DATA 4 0x021b001c 0x00000000
/*
* MMDC0_MDSCR, clear this register
* (especially the configuration bit as initialization is complete)
*/
DATA 4 0x021b401c 0x00000000
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
DATA 4 0x020e0010 0xF00000CF
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
#else /* CONFIG_MX6DL_LPDDR2 */
DATA 4 0x020e0798 0x000c0000
DATA 4 0x020e0758 0x00000000
DATA 4 0x020e0588 0x00000030
DATA 4 0x020e0594 0x00000030
DATA 4 0x020e056c 0x00000030
DATA 4 0x020e0578 0x00000030
DATA 4 0x020e074c 0x00000030
DATA 4 0x020e057c 0x00000030
DATA 4 0x020e0590 0x00003000
DATA 4 0x020e0598 0x00003000
DATA 4 0x020e058c 0x00000000
DATA 4 0x020e059c 0x00003030
DATA 4 0x020e05a0 0x00003030
DATA 4 0x020e078c 0x00000030
DATA 4 0x020e0750 0x00020000
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
DATA 4 0x020e051c 0x00000030
DATA 4 0x020e0518 0x00000030
DATA 4 0x020e050c 0x00000030
DATA 4 0x020e05b8 0x00000030
DATA 4 0x020e05c0 0x00000030
DATA 4 0x020e0774 0x00020000
DATA 4 0x020e0784 0x00000030
DATA 4 0x020e0788 0x00000030
DATA 4 0x020e0794 0x00000030
DATA 4 0x020e079c 0x00000030
DATA 4 0x020e07a0 0x00000030
DATA 4 0x020e07a4 0x00000030
DATA 4 0x020e07a8 0x00000030
DATA 4 0x020e0748 0x00000030
DATA 4 0x020e05ac 0x00000030
DATA 4 0x020e05b4 0x00000030
DATA 4 0x020e0528 0x00000030
DATA 4 0x020e0520 0x00000030
DATA 4 0x020e0514 0x00000030
DATA 4 0x020e0510 0x00000030
DATA 4 0x020e05bc 0x00000030
DATA 4 0x020e05c4 0x00000030
DATA 4 0x021b0800 0xa1390003
DATA 4 0x021b4800 0xa1390003
DATA 4 0x021b080c 0x001F001F
DATA 4 0x021b0810 0x001F001F
DATA 4 0x021b480c 0x00370037
DATA 4 0x021b4810 0x00370037
DATA 4 0x021b083c 0x422f0220
DATA 4 0x021b0840 0x021f0219
DATA 4 0x021b483C 0x422f0220
DATA 4 0x021b4840 0x022d022f
DATA 4 0x021b0848 0x47494b49
DATA 4 0x021b4848 0x48484c47
DATA 4 0x021b0850 0x39382b2f
DATA 4 0x021b4850 0x2f35312c
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
DATA 4 0x021b481c 0x33333333
DATA 4 0x021b4820 0x33333333
DATA 4 0x021b4824 0x33333333
DATA 4 0x021b4828 0x33333333
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b0004 0x0002002d
DATA 4 0x021b0008 0x00333030
DATA 4 0x021b000c 0x40445323
DATA 4 0x021b0010 0xb66e8c63
DATA 4 0x021b0014 0x01ff00db
DATA 4 0x021b0018 0x00081740
DATA 4 0x021b001c 0x00008000
DATA 4 0x021b002c 0x000026d2
DATA 4 0x021b0030 0x00440e21
#ifdef CONFIG_DDR_32BIT
DATA 4 0x021b0040 0x00000017
DATA 4 0x021b0000 0xc3190000
#else
DATA 4 0x021b0040 0x00000027
DATA 4 0x021b0000 0xc31a0000
#endif
DATA 4 0x021b001c 0x04008032
DATA 4 0x021b001c 0x0400803a
DATA 4 0x021b001c 0x00008033
DATA 4 0x021b001c 0x0000803b
DATA 4 0x021b001c 0x00428031
DATA 4 0x021b001c 0x00428039
DATA 4 0x021b001c 0x07208030
DATA 4 0x021b001c 0x07208038
DATA 4 0x021b001c 0x04008040
DATA 4 0x021b001c 0x04008048
DATA 4 0x021b0020 0x00005800
DATA 4 0x021b0818 0x00000007
DATA 4 0x021b4818 0x00000007
DATA 4 0x021b0004 0x0002556d
DATA 4 0x021b4004 0x00011006
DATA 4 0x021b001c 0x00000000
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
DATA 4 0x020e0010 0xF00000CF
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
#endif /* CONFIG_MX6DL_LPDDR2 */
Reference in New Issue View Git Blame Copy Permalink