Hans de Goede 583fede8ee sunxi: A23: Fix some revisions needing a different magic sram poke ... I've had this one a23 tablet which would not boot and I've finally figured out what the problem is by looking at the released boot0 code, it seems the magic sram controller poke which we need to do in s_init() depends on the revision of the a23. Specifically this change is needed to get the A23 SoC I have with the following serial to boot: "E6071AB 26Y7". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>		2016-03-23 22:04:13 +01:00
..
board.c	sunxi: A23: Fix some revisions needing a different magic sram poke	2016-03-23 22:04:13 +01:00
clock_sun4i.c	sun4i: clock: Cleanup some whitespace errors	2015-12-10 15:45:48 +01:00
clock_sun6i.c	sunxi: Support H3 CCU security switches	2016-01-26 16:20:05 +01:00
clock_sun8i_a83t.c	sunxi: clk: add basic clocks for A83T	2015-12-10 15:45:47 +01:00
clock_sun9i.c	sun9i: Add sun9i (A80) clock setup support	2015-01-22 12:34:55 +01:00
clock.c	sunxi: Support H3 CCU security switches	2016-01-26 16:20:05 +01:00
config.mk	sunxi: Normalise FEL support	2015-02-16 20:15:09 +01:00
cpu_info.c	sunxi: Add Machine Support for A83T SOC	2015-12-10 11:14:21 +01:00
dram_helpers.c	sunxi: dram: Un-inline dram helper functions	2015-02-16 20:05:52 +01:00
dram_sun4i.c	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun6i.c	sunxi: Fix buggy sun6i/sun8i DRAM size detection logic	2015-01-14 14:56:37 +01:00
dram_sun8i_a23.c	Kill unneeded #include <linux/kconfig.h>	2015-07-27 15:02:12 -04:00
dram_sun8i_a33.c	Kill unneeded #include <linux/kconfig.h>	2015-07-27 15:02:12 -04:00
dram_sun8i_a83t.c	sunxi: Add support for LPDDR3 for A83T	2016-01-26 16:20:05 +01:00
dram_sun8i_h3.c	sunxi: Fix H3 DRAM DQ read delay configuration	2015-12-10 15:45:48 +01:00
fel_utils.S	sunxi: Support the FEL boot mode in the regular u-boot build	2015-02-16 20:23:52 +01:00
Makefile	sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3	2016-01-26 16:20:04 +01:00
p2wi.c	sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/	2015-01-14 14:56:36 +01:00
pinmux.c	dm: sunxi: Add pinmux functions which take a bank parameter	2014-11-05 13:09:58 +01:00
pmic_bus.c	sunxi: power: enabled support for axp818	2015-12-10 11:14:22 +01:00
prcm.c	sunxi: Add support for the I2C controller which is part of the PRCM	2016-01-21 07:30:01 +01:00
psci_sun6i.S	sunxi: Support PSCI ops on Allwinner H3	2016-01-26 16:20:05 +01:00
psci_sun7i.S	ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S	2015-07-20 11:44:38 -07:00
rsb.c	sunxi: rsb: Enable R_PIO clock before configuring external pins	2015-07-05 11:32:11 +02:00
start.c	sunxi: add sun7i cpu, board and start of day support	2014-05-25 16:12:40 +02:00
timer.c	sunxi: add sun7i clocks and timer support.	2014-05-25 16:12:12 +02:00
tzpc.c	sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3	2016-01-26 16:20:04 +01:00
u-boot-spl.lds	sunxi: Add i2c support	2014-07-18 19:41:30 +01:00
usb_phy.c	sunxi: H3: Add support for the host usb-phys	2016-02-23 20:59:10 +01:00