u-boot-brain/arch/arm
Lokesh Vutla 55f8eb3169 arm: dts: k3-j721e-main: Add MAIN domain R5F cluster nodes
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT nodes for these two MAIN domain R5F cluster/subsystems,
the two R5 cores are each added as child nodes to the corresponding
main cluster node. Configure SS0 in split mode an SS1 in lockstep mode,
with the ATCMs enabled to allow the R5 cores to execute code from DDR
with boot-strapping code from ATCM.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
..
cpu u-boot-imx-20191009 2019-10-09 11:44:45 -04:00
dts arm: dts: k3-j721e-main: Add MAIN domain R5F cluster nodes 2019-10-11 10:07:35 -04:00
include imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB 2019-10-08 16:36:37 +02:00
lib board_f: fix noncached reservation calculation 2019-08-30 14:17:11 -04:00
mach-aspeed
mach-at91 ARM: at91: Add SFR definitions 2019-10-08 09:16:11 +03:00
mach-bcm283x ARM: bcm283x: Include definition for additional emmc clock 2019-09-06 18:16:59 +02:00
mach-bcmstb
mach-davinci ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands 2019-09-13 11:56:08 -04:00
mach-exynos CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-highbank
mach-imx Revert "spl: imx6: Let spl_boot_device return USDHC1 or USDHC2" 2019-10-08 16:36:37 +02:00
mach-integrator
mach-k3 arm: K3: sysfw-loader: Allow loading SYSFW via Y-Modem 2019-10-11 10:07:33 -04:00
mach-keystone arm: mach-keystone: Use appended original image size in image processing 2019-07-29 17:58:52 -04:00
mach-kirkwood env: Move env_get() to env.h 2019-08-11 16:43:41 -04:00
mach-mediatek board: mediatek: Add pumpkin board support 2019-07-29 09:32:11 -04:00
mach-meson - amlogic: add support for the SEI Robotic SEI510 2019-08-12 23:03:35 -04:00
mach-mvebu arm: mvebu: set 38x and 39x AVS on lower frequency 2019-07-11 10:58:03 +02:00
mach-omap2 spl: Allow tiny printf() to be controlled in SPL and TPL 2019-10-08 13:57:45 +08:00
mach-orion5x
mach-owl
mach-qemu
mach-rmobile spl: Allow tiny printf() to be controlled in SPL and TPL 2019-10-08 13:57:45 +08:00
mach-rockchip spl: pass args to board_return_to_bootrom 2019-10-08 16:35:16 +02:00
mach-s5pc1xx CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-snapdragon arm: mach-snapdragon: pinctrl: clarify gpio disable bit 2019-01-25 12:12:56 -05:00
mach-socfpga spl: Convert CONFIG_SPL_SIZE_LIMIT to hex 2019-10-08 13:57:45 +08:00
mach-sti
mach-stm32 mach-stm32: Fix MPU region size dedicated to SDRAM for STM32F4 2019-06-28 09:45:27 +02:00
mach-stm32mp bsec: update after MISC u-class update 2019-08-27 11:19:23 +02:00
mach-sunxi sunxi: H6: Enable USB for existing boards 2019-07-16 17:13:15 +05:30
mach-tegra Revert "ARM: tegra: reserve unmapped RAM so EFI doesn't use it" 2019-10-06 16:02:37 +02:00
mach-uniphier dm: core: Add device_foreach_child() 2019-10-08 13:57:39 +08:00
mach-versal arm64: versal: Move common board dtb search 2019-10-08 13:14:54 +02:00
mach-versatile
mach-zynq CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-zynqmp arm64: zynqmp: Use mailbox driver for PMUFW config loading 2019-10-08 09:55:11 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk
Kconfig Xilinx/FPGA changes for v2020.01 2019-10-09 16:22:03 -04:00
Kconfig.debug
Makefile arm: imx: build mach-imx for i.MX8 2019-01-28 20:35:47 +01:00