mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-09 12:46:17 +09:00
6f6b7cfa89
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
162 lines
4.3 KiB
C
162 lines
4.3 KiB
C
/*
|
|
* Copyright (C) 2014 Soeren Moch <smoch@web.de>
|
|
*
|
|
* Configuration settings for the TBS2910 MatrixARM board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __TBS2910_CONFIG_H
|
|
#define __TBS2910_CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/* General configuration */
|
|
|
|
#define CONFIG_MACH_TYPE 3980
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END \
|
|
(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ 0x10000000
|
|
|
|
/* Serial console */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
|
|
|
|
/* Filesystems / image support */
|
|
|
|
/* MMC */
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_MII
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 4
|
|
#define CONFIG_PHY_ATHEROS
|
|
|
|
/* Framebuffer */
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_IPUV3
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
#endif
|
|
|
|
/* PCI */
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_PCIE_IMX
|
|
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
|
|
#endif
|
|
|
|
/* SATA */
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#endif
|
|
|
|
/* USB */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#ifdef CONFIG_CMD_USB_MASS_STORAGE
|
|
#define CONFIG_USBD_HS
|
|
#endif /* CONFIG_CMD_USB_MASS_STORAGE */
|
|
#ifdef CONFIG_USB_KEYBOARD
|
|
#define CONFIG_PREBOOT \
|
|
"usb start; " \
|
|
"if hdmidet; then " \
|
|
"run set_con_hdmi; " \
|
|
"else " \
|
|
"run set_con_serial; " \
|
|
"fi;"
|
|
#endif /* CONFIG_USB_KEYBOARD */
|
|
#endif /* CONFIG_CMD_USB */
|
|
|
|
/* RTC */
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1307
|
|
#define CONFIG_SYS_RTC_BUS_NUM 2
|
|
#endif
|
|
|
|
/* I2C */
|
|
#ifdef CONFIG_CMD_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_I2C_EDID
|
|
#endif
|
|
|
|
/* Environment organization */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
|
|
#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#define CONFIG_ENV_OFFSET (384 * 1024)
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
|
|
"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
|
|
"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
|
|
"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
|
|
"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
|
|
"${bootargs_mmc3}\0" \
|
|
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
|
|
"rdinit=/sbin/init enable_wait_mode=off\0" \
|
|
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
|
|
"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
|
|
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
|
|
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
|
|
"run bootargs_upd; " \
|
|
"bootm 0x10800000 0x10d00000\0" \
|
|
"console=ttymxc0\0" \
|
|
"fan=gpio set 92\0" \
|
|
"set_con_serial=setenv stdout serial; " \
|
|
"setenv stderr serial;\0" \
|
|
"set_con_hdmi=setenv stdout serial,vga; " \
|
|
"setenv stderr serial,vga;\0" \
|
|
"stderr=serial,vga;\0" \
|
|
"stdin=serial,usbkbd;\0" \
|
|
"stdout=serial,vga;\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc rescan; " \
|
|
"if run bootcmd_up1; then " \
|
|
"run bootcmd_up2; " \
|
|
"else " \
|
|
"run bootcmd_mmc; " \
|
|
"fi"
|
|
|
|
#endif /* __TBS2910_CONFIG_H * */
|