mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 13:58:51 +09:00
![Sven Schwermer](/assets/img/avatar_default.png)
This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
361 lines
8.3 KiB
C
361 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com>
|
|
* Copyright (C) 2015 Toradex AG
|
|
*
|
|
* Based on ehci-mx6 driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <usb.h>
|
|
#include <errno.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/regs-usbphy.h>
|
|
#include <usb/ehci-ci.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdtdec.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define USB_NC_REG_OFFSET 0x00000800
|
|
|
|
#define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6)
|
|
|
|
#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
|
|
#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
|
|
|
|
/* USBCMD */
|
|
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
|
|
#define UCMD_RESET (1 << 1) /* controller reset */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const unsigned phy_bases[] = {
|
|
USB_PHY0_BASE_ADDR,
|
|
USB_PHY1_BASE_ADDR,
|
|
};
|
|
|
|
static const unsigned nc_reg_bases[] = {
|
|
USBC0_BASE_ADDR,
|
|
USBC1_BASE_ADDR,
|
|
};
|
|
|
|
static void usb_internal_phy_clock_gate(int index)
|
|
{
|
|
void __iomem *phy_reg;
|
|
|
|
phy_reg = (void __iomem *)phy_bases[index];
|
|
clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE);
|
|
}
|
|
|
|
static void usb_power_config(int index)
|
|
{
|
|
struct anadig_reg __iomem *anadig =
|
|
(struct anadig_reg __iomem *)ANADIG_BASE_ADDR;
|
|
void __iomem *pll_ctrl;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
pll_ctrl = &anadig->pll3_ctrl;
|
|
clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS);
|
|
setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE
|
|
| ANADIG_PLL3_CTRL_POWERDOWN
|
|
| ANADIG_PLL_CTRL_EN_USB_CLKS);
|
|
break;
|
|
case 1:
|
|
pll_ctrl = &anadig->pll7_ctrl;
|
|
clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS);
|
|
setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE
|
|
| ANADIG_PLL7_CTRL_POWERDOWN
|
|
| ANADIG_PLL_CTRL_EN_USB_CLKS);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void usb_phy_enable(int index, struct usb_ehci *ehci)
|
|
{
|
|
void __iomem *phy_reg;
|
|
void __iomem *phy_ctrl;
|
|
void __iomem *usb_cmd;
|
|
|
|
phy_reg = (void __iomem *)phy_bases[index];
|
|
phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
|
|
usb_cmd = (void __iomem *)&ehci->usbcmd;
|
|
|
|
/* Stop then Reset */
|
|
clrbits_le32(usb_cmd, UCMD_RUN_STOP);
|
|
while (readl(usb_cmd) & UCMD_RUN_STOP)
|
|
;
|
|
|
|
setbits_le32(usb_cmd, UCMD_RESET);
|
|
while (readl(usb_cmd) & UCMD_RESET)
|
|
;
|
|
|
|
/* Reset USBPHY module */
|
|
setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST);
|
|
udelay(10);
|
|
|
|
/* Remove CLKGATE and SFTRST */
|
|
clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
|
|
udelay(10);
|
|
|
|
/* Power up the PHY */
|
|
writel(0, phy_reg + USBPHY_PWD);
|
|
|
|
/* Enable FS/LS device */
|
|
setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 |
|
|
USBPHY_CTRL_ENUTMILEVEL3);
|
|
}
|
|
|
|
static void usb_oc_config(int index)
|
|
{
|
|
void __iomem *ctrl;
|
|
|
|
ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET);
|
|
|
|
setbits_le32(ctrl, UCTRL_OVER_CUR_POL);
|
|
setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
|
|
}
|
|
|
|
int __weak board_usb_phy_mode(int port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __weak board_ehci_hcd_init(int port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int ehci_vf_common_init(struct usb_ehci *ehci, int index)
|
|
{
|
|
int ret;
|
|
|
|
/* Do board specific initialisation */
|
|
ret = board_ehci_hcd_init(index);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usb_power_config(index);
|
|
usb_oc_config(index);
|
|
usb_internal_phy_clock_gate(index);
|
|
usb_phy_enable(index, ehci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_USB)
|
|
int ehci_hcd_init(int index, enum usb_init_type init,
|
|
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
struct usb_ehci *ehci;
|
|
enum usb_init_type type;
|
|
int ret;
|
|
|
|
if (index >= ARRAY_SIZE(nc_reg_bases))
|
|
return -EINVAL;
|
|
|
|
ehci = (struct usb_ehci *)nc_reg_bases[index];
|
|
|
|
ret = ehci_vf_common_init(index);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
|
|
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
|
|
type = board_usb_phy_mode(index);
|
|
if (type != init)
|
|
return -ENODEV;
|
|
|
|
if (init == USB_INIT_DEVICE) {
|
|
setbits_le32(&ehci->usbmode, CM_DEVICE);
|
|
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
} else if (init == USB_INIT_HOST) {
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
return 0;
|
|
}
|
|
#else
|
|
/* Possible port types (dual role mode) */
|
|
enum dr_mode {
|
|
DR_MODE_NONE = 0,
|
|
DR_MODE_HOST, /* supports host operation */
|
|
DR_MODE_DEVICE, /* supports device operation */
|
|
DR_MODE_OTG, /* supports both */
|
|
};
|
|
|
|
struct ehci_vf_priv_data {
|
|
struct ehci_ctrl ctrl;
|
|
struct usb_ehci *ehci;
|
|
struct gpio_desc cdet_gpio;
|
|
enum usb_init_type init_type;
|
|
enum dr_mode dr_mode;
|
|
u32 portnr;
|
|
};
|
|
|
|
static int vf_usb_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ehci_vf_priv_data *priv = dev_get_priv(dev);
|
|
const void *dt_blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
const char *mode;
|
|
|
|
priv->portnr = dev->seq;
|
|
|
|
priv->ehci = (struct usb_ehci *)devfdt_get_addr(dev);
|
|
mode = fdt_getprop(dt_blob, node, "dr_mode", NULL);
|
|
if (mode) {
|
|
if (0 == strcmp(mode, "host")) {
|
|
priv->dr_mode = DR_MODE_HOST;
|
|
priv->init_type = USB_INIT_HOST;
|
|
} else if (0 == strcmp(mode, "peripheral")) {
|
|
priv->dr_mode = DR_MODE_DEVICE;
|
|
priv->init_type = USB_INIT_DEVICE;
|
|
} else if (0 == strcmp(mode, "otg")) {
|
|
priv->dr_mode = DR_MODE_OTG;
|
|
/*
|
|
* We set init_type to device by default when OTG
|
|
* mode is requested. If a valid gpio is provided
|
|
* we will switch the init_type based on the state
|
|
* of the gpio pin.
|
|
*/
|
|
priv->init_type = USB_INIT_DEVICE;
|
|
} else {
|
|
debug("%s: Cannot decode dr_mode '%s'\n",
|
|
__func__, mode);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
priv->dr_mode = DR_MODE_HOST;
|
|
priv->init_type = USB_INIT_HOST;
|
|
}
|
|
|
|
if (priv->dr_mode == DR_MODE_OTG) {
|
|
gpio_request_by_name_nodev(offset_to_ofnode(node),
|
|
"fsl,cdet-gpio", 0, &priv->cdet_gpio,
|
|
GPIOD_IS_IN);
|
|
if (dm_gpio_is_valid(&priv->cdet_gpio)) {
|
|
if (dm_gpio_get_value(&priv->cdet_gpio))
|
|
priv->init_type = USB_INIT_DEVICE;
|
|
else
|
|
priv->init_type = USB_INIT_HOST;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf_init_after_reset(struct ehci_ctrl *dev)
|
|
{
|
|
struct ehci_vf_priv_data *priv = dev->priv;
|
|
enum usb_init_type type = priv->init_type;
|
|
struct usb_ehci *ehci = priv->ehci;
|
|
int ret;
|
|
|
|
ret = ehci_vf_common_init(priv->ehci, priv->portnr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (type == USB_INIT_DEVICE)
|
|
return 0;
|
|
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ehci_ops vf_ehci_ops = {
|
|
.init_after_reset = vf_init_after_reset
|
|
};
|
|
|
|
static int vf_usb_bind(struct udevice *dev)
|
|
{
|
|
static int num_controllers;
|
|
|
|
/*
|
|
* Without this hack, if we return ENODEV for USB Controller 0, on
|
|
* probe for the next controller, USB Controller 1 will be given a
|
|
* sequence number of 0. This conflicts with our requirement of
|
|
* sequence numbers while initialising the peripherals.
|
|
*/
|
|
dev->req_seq = num_controllers;
|
|
num_controllers++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_usb_probe(struct udevice *dev)
|
|
{
|
|
struct usb_platdata *plat = dev_get_platdata(dev);
|
|
struct ehci_vf_priv_data *priv = dev_get_priv(dev);
|
|
struct usb_ehci *ehci = priv->ehci;
|
|
struct ehci_hccr *hccr;
|
|
struct ehci_hcor *hcor;
|
|
int ret;
|
|
|
|
ret = ehci_vf_common_init(ehci, priv->portnr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->init_type != plat->init_type)
|
|
return -ENODEV;
|
|
|
|
if (priv->init_type == USB_INIT_HOST) {
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
}
|
|
|
|
mdelay(10);
|
|
|
|
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
hcor = (struct ehci_hcor *)((uint32_t)hccr +
|
|
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
|
|
|
|
return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, priv->init_type);
|
|
}
|
|
|
|
static const struct udevice_id vf_usb_ids[] = {
|
|
{ .compatible = "fsl,vf610-usb" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(usb_ehci) = {
|
|
.name = "ehci_vf",
|
|
.id = UCLASS_USB,
|
|
.of_match = vf_usb_ids,
|
|
.bind = vf_usb_bind,
|
|
.probe = ehci_usb_probe,
|
|
.remove = ehci_deregister,
|
|
.ops = &ehci_usb_ops,
|
|
.ofdata_to_platdata = vf_usb_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
#endif
|