mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 02:18:51 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
179 lines
4.1 KiB
C
179 lines
4.1 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <config.h>
|
|
#ifdef CONFIG_TWL6030_POWER
|
|
|
|
#include <twl6030.h>
|
|
|
|
static int twl6030_gpadc_read_channel(u8 channel_no)
|
|
{
|
|
u8 lsb = 0;
|
|
u8 msb = 0;
|
|
int ret = 0;
|
|
|
|
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
|
|
GPCH0_LSB + channel_no * 2, &lsb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
|
|
GPCH0_MSB + channel_no * 2, &msb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return (msb << 8) | lsb;
|
|
}
|
|
|
|
static int twl6030_gpadc_sw2_trigger(void)
|
|
{
|
|
u8 val;
|
|
int ret = 0;
|
|
|
|
ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Waiting until the SW1 conversion ends*/
|
|
val = CTRL_P2_BUSY;
|
|
|
|
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
|
|
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
|
|
if (ret)
|
|
return ret;
|
|
udelay(1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void twl6030_stop_usb_charging(void)
|
|
{
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
|
|
|
|
return;
|
|
}
|
|
|
|
void twl6030_start_usb_charging(void)
|
|
{
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CONTROLLER_INT_MASK, MBAT_TEMP);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
|
|
/* Enable USB charging */
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
|
|
CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
|
|
return;
|
|
}
|
|
|
|
int twl6030_get_battery_current(void)
|
|
{
|
|
int battery_current = 0;
|
|
u8 msb = 0;
|
|
u8 lsb = 0;
|
|
|
|
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
|
|
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
|
|
battery_current = ((msb << 8) | lsb);
|
|
|
|
/* convert 10 bit signed number to 16 bit signed number */
|
|
if (battery_current >= 0x2000)
|
|
battery_current = (battery_current - 0x4000);
|
|
|
|
battery_current = battery_current * 3000 / 4096;
|
|
printf("Battery Current: %d mA\n", battery_current);
|
|
|
|
return battery_current;
|
|
}
|
|
|
|
int twl6030_get_battery_voltage(void)
|
|
{
|
|
int battery_volt = 0;
|
|
int ret = 0;
|
|
|
|
/* Start GPADC SW conversion */
|
|
ret = twl6030_gpadc_sw2_trigger();
|
|
if (ret) {
|
|
printf("Failed to convert battery voltage\n");
|
|
return ret;
|
|
}
|
|
|
|
/* measure Vbat voltage */
|
|
battery_volt = twl6030_gpadc_read_channel(7);
|
|
if (battery_volt < 0) {
|
|
printf("Failed to read battery voltage\n");
|
|
return ret;
|
|
}
|
|
battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
|
|
printf("Battery Voltage: %d mV\n", battery_volt);
|
|
|
|
return battery_volt;
|
|
}
|
|
|
|
void twl6030_init_battery_charging(void)
|
|
{
|
|
u8 stat1 = 0;
|
|
int battery_volt = 0;
|
|
int ret = 0;
|
|
|
|
/* Enable VBAT measurement */
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
|
|
|
|
/* Enable GPADC module */
|
|
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
|
|
if (ret) {
|
|
printf("Failed to enable GPADC\n");
|
|
return;
|
|
}
|
|
|
|
battery_volt = twl6030_get_battery_voltage();
|
|
if (battery_volt < 0)
|
|
return;
|
|
|
|
if (battery_volt < 3000)
|
|
printf("Main battery voltage too low!\n");
|
|
|
|
/* Check for the presence of USB charger */
|
|
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
|
|
|
|
/* check for battery presence indirectly via Fuel gauge */
|
|
if ((stat1 & VBUS_DET) && (battery_volt < 3300))
|
|
twl6030_start_usb_charging();
|
|
|
|
return;
|
|
}
|
|
|
|
void twl6030_power_mmc_init()
|
|
{
|
|
/* set voltage to 3.0 and turnon for APP */
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15);
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21);
|
|
}
|
|
|
|
void twl6030_usb_device_settings()
|
|
{
|
|
u8 data = 0;
|
|
|
|
/* Select APP Group and set state to ON */
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21);
|
|
|
|
twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data);
|
|
data |= 0x10;
|
|
|
|
/* Select the input supply for VBUS regulator */
|
|
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data);
|
|
}
|
|
#endif
|