mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
![Patrick Delaunay](/assets/img/avatar_default.png)
Add support of DBGMCU_IDC for cpu identifier and revision Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
184 lines
4.2 KiB
C
184 lines
4.2 KiB
C
/*
|
|
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
/* RCC register */
|
|
#define RCC_TZCR (STM32_RCC_BASE + 0x00)
|
|
#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
|
|
#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
|
|
#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
|
|
#define RCC_BDCR_VSWRST BIT(31)
|
|
#define RCC_BDCR_RTCSRC GENMASK(17, 16)
|
|
#define RCC_DBGCFGR_DBGCKEN BIT(8)
|
|
|
|
/* Security register */
|
|
#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
|
|
#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
|
|
|
|
#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
|
|
#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
|
|
#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
|
|
|
|
#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
|
|
|
|
#define PWR_CR1 (STM32_PWR_BASE + 0x00)
|
|
#define PWR_CR1_DBP BIT(8)
|
|
|
|
/* DBGMCU register */
|
|
#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
|
|
#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
|
|
#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
|
|
#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
|
|
#define DBGMCU_IDC_DEV_ID_SHIFT 0
|
|
#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
|
|
#define DBGMCU_IDC_REV_ID_SHIFT 16
|
|
|
|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
|
|
static void security_init(void)
|
|
{
|
|
/* Disable the backup domain write protection */
|
|
/* the protection is enable at each reset by hardware */
|
|
/* And must be disable by software */
|
|
setbits_le32(PWR_CR1, PWR_CR1_DBP);
|
|
|
|
while (!(readl(PWR_CR1) & PWR_CR1_DBP))
|
|
;
|
|
|
|
/* If RTC clock isn't enable so this is a cold boot then we need
|
|
* to reset the backup domain
|
|
*/
|
|
if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
|
|
setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
|
|
while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
|
|
;
|
|
clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
|
|
}
|
|
|
|
/* allow non secure access in Write/Read for all peripheral */
|
|
writel(GENMASK(25, 0), ETZPC_DECPROT0);
|
|
|
|
/* Open SYSRAM for no secure access */
|
|
writel(0x0, ETZPC_TZMA1_SIZE);
|
|
|
|
/* enable TZC1 TZC2 clock */
|
|
writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
|
|
|
|
/* Region 0 set to no access by default */
|
|
/* bit 0 / 16 => nsaid0 read/write Enable
|
|
* bit 1 / 17 => nsaid1 read/write Enable
|
|
* ...
|
|
* bit 15 / 31 => nsaid15 read/write Enable
|
|
*/
|
|
writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
|
|
/* bit 30 / 31 => Secure Global Enable : write/read */
|
|
/* bit 0 / 1 => Region Enable for filter 0/1 */
|
|
writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
|
|
|
|
/* Enable Filter 0 and 1 */
|
|
setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
|
|
|
|
/* RCC trust zone deactivated */
|
|
writel(0x0, RCC_TZCR);
|
|
|
|
/* TAMP: deactivate the internal tamper
|
|
* Bit 23 ITAMP8E: monotonic counter overflow
|
|
* Bit 20 ITAMP5E: RTC calendar overflow
|
|
* Bit 19 ITAMP4E: HSE monitoring
|
|
* Bit 18 ITAMP3E: LSE monitoring
|
|
* Bit 16 ITAMP1E: RTC power domain supply monitoring
|
|
*/
|
|
writel(0x0, TAMP_CR1);
|
|
}
|
|
|
|
/*
|
|
* Debug init
|
|
*/
|
|
static void dbgmcu_init(void)
|
|
{
|
|
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
|
|
|
|
/* Freeze IWDG2 if Cortex-A7 is in debug mode */
|
|
setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
|
|
}
|
|
#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
/* early armv7 timer init: needed for polling */
|
|
timer_init();
|
|
|
|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
|
|
dbgmcu_init();
|
|
|
|
security_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void enable_caches(void)
|
|
{
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
}
|
|
|
|
static u32 read_idc(void)
|
|
{
|
|
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
|
|
|
|
return readl(DBGMCU_IDC);
|
|
}
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
|
|
}
|
|
|
|
u32 get_cpu_type(void)
|
|
{
|
|
return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
|
|
}
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
char *cpu_s, *cpu_r;
|
|
|
|
switch (get_cpu_type()) {
|
|
case CPU_STMP32MP15x:
|
|
cpu_s = "15x";
|
|
break;
|
|
default:
|
|
cpu_s = "?";
|
|
break;
|
|
}
|
|
|
|
switch (get_cpu_rev()) {
|
|
case CPU_REVA:
|
|
cpu_r = "A";
|
|
break;
|
|
case CPU_REVB:
|
|
cpu_r = "B";
|
|
break;
|
|
default:
|
|
cpu_r = "?";
|
|
break;
|
|
}
|
|
|
|
printf("CPU: STM32MP%s.%s\n", cpu_s, cpu_r);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DISPLAY_CPUINFO */
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
}
|