mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
![Jagan Teki](/assets/img/avatar_default.png)
Banana Pi M1 Plus is an open-source single-board computer that adds more connectivity to the classic board using Allwinner A20 SOC. Bananapi M1-Plus features: - A20 Dual-core 1.0GHz - 1 GB DDR3 SDRAM - MicroSD - 10/100/1000 Ethernet RJ45 - WiFi b/g/n - 5V DC Micro USB power-supply For dts file, Sync with Linux commit f92ca09("Merge branch 'akpm/master'"). Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
275 lines
5.9 KiB
Plaintext
275 lines
5.9 KiB
Plaintext
/*
|
|
* Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
|
|
*
|
|
* Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun7i-a20.dtsi"
|
|
#include "sunxi-common-regulators.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Banana Pi BPI-M1-Plus";
|
|
compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins_bpi_m1p>;
|
|
|
|
green {
|
|
label = "bananapi-m1-plus:green:usr";
|
|
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
pwr {
|
|
label = "bananapi-m1-plus:pwr:usr";
|
|
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
mmc3_pwrseq: mmc3_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
|
|
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
|
|
regulator-name = "gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
enable-active-high;
|
|
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&ahci {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac_pins_rgmii_a>;
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii";
|
|
phy-supply = <®_gmac_3v3>;
|
|
status = "okay";
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
status = "okay";
|
|
|
|
axp209: pmic@34 {
|
|
reg = <0x34>;
|
|
interrupt-parent = <&nmi_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
#include "axp209.dtsi"
|
|
|
|
&ir0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir0_rx_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
|
|
vmmc-supply = <®_vcc3v3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
|
|
cd-inverted;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc3_pins_a>;
|
|
vmmc-supply = <®_vcc3v3>;
|
|
mmc-pwrseq = <&mmc3_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
wakeup-source;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&mmc3_pins_a {
|
|
/* AP6210 requires pull-up */
|
|
bias-pull-up;
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&otg_sram {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
|
|
pins = "PH23";
|
|
function = "gpio_out";
|
|
};
|
|
|
|
led_pins_bpi_m1p: led_pins@0 {
|
|
pins = "PH24", "PH25";
|
|
function = "gpio_out";
|
|
};
|
|
|
|
mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
|
|
pins = "PH10";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
|
|
pins = "PH22";
|
|
function = "gpio_out";
|
|
};
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-int-dll";
|
|
};
|
|
|
|
®_ldo1 {
|
|
regulator-name = "vdd-rtc";
|
|
};
|
|
|
|
®_ldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "avcc";
|
|
};
|
|
|
|
®_usb0_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
|
|
usb0_vbus_power-supply = <&usb_power_supply>;
|
|
usb0_vbus-supply = <®_usb0_vbus>;
|
|
/* VBUS on usb host ports are tied to DC5V and therefore always on */
|
|
status = "okay";
|
|
};
|