mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![Ramneek Mehresh](/assets/img/avatar_default.png)
Remove all redundant dwc3 driver function calls that are defined by dwc3 driver Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
241 lines
5.9 KiB
C
241 lines
5.9 KiB
C
/*
|
|
* OMAP USB PHY Support
|
|
*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <asm-generic/errno.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#include <linux/compat.h>
|
|
#include <linux/usb/dwc3.h>
|
|
#include <linux/usb/xhci-omap.h>
|
|
|
|
#include "../host/xhci.h"
|
|
|
|
#ifdef CONFIG_OMAP_USB3PHY1_HOST
|
|
struct usb_dpll_params {
|
|
u16 m;
|
|
u8 n;
|
|
u8 freq:3;
|
|
u8 sd;
|
|
u32 mf;
|
|
};
|
|
|
|
#define NUM_USB_CLKS 6
|
|
|
|
static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = {
|
|
{1250, 5, 4, 20, 0}, /* 12 MHz */
|
|
{3125, 20, 4, 20, 0}, /* 16.8 MHz */
|
|
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
|
|
{1250, 12, 4, 20, 0}, /* 26 MHz */
|
|
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
|
|
{1000, 7, 4, 10, 0}, /* 20 MHz */
|
|
};
|
|
|
|
static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
u32 val;
|
|
|
|
writel(SET_PLL_GO, &phy_regs->pll_go);
|
|
do {
|
|
val = readl(&phy_regs->pll_status);
|
|
if (val & PLL_LOCK)
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
u32 clk_index = get_sys_clk_index();
|
|
u32 val;
|
|
|
|
val = readl(&phy_regs->pll_config_1);
|
|
val &= ~PLL_REGN_MASK;
|
|
val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT;
|
|
writel(val, &phy_regs->pll_config_1);
|
|
|
|
val = readl(&phy_regs->pll_config_2);
|
|
val &= ~PLL_SELFREQDCO_MASK;
|
|
val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT;
|
|
writel(val, &phy_regs->pll_config_2);
|
|
|
|
val = readl(&phy_regs->pll_config_1);
|
|
val &= ~PLL_REGM_MASK;
|
|
val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT;
|
|
writel(val, &phy_regs->pll_config_1);
|
|
|
|
val = readl(&phy_regs->pll_config_4);
|
|
val &= ~PLL_REGM_F_MASK;
|
|
val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT;
|
|
writel(val, &phy_regs->pll_config_4);
|
|
|
|
val = readl(&phy_regs->pll_config_3);
|
|
val &= ~PLL_SD_MASK;
|
|
val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT;
|
|
writel(val, &phy_regs->pll_config_3);
|
|
|
|
omap_usb_dpll_relock(phy_regs);
|
|
}
|
|
|
|
static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
u32 rate = get_sys_clk_freq()/1000000;
|
|
u32 val;
|
|
|
|
val = readl((*ctrl)->control_phy_power_usb);
|
|
val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK);
|
|
val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON);
|
|
val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT;
|
|
|
|
writel(val, (*ctrl)->control_phy_power_usb);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl((*ctrl)->control_phy_power_usb);
|
|
if (on) {
|
|
val &= ~USB3_PWRCTL_CLK_CMD_MASK;
|
|
val |= USB3_PHY_TX_RX_POWERON;
|
|
} else {
|
|
val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON);
|
|
}
|
|
|
|
writel(val, (*ctrl)->control_phy_power_usb);
|
|
}
|
|
|
|
void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
|
|
{
|
|
omap_usb_dpll_lock(phy_regs);
|
|
usb3_phy_partial_powerup(phy_regs);
|
|
/*
|
|
* Give enough time for the PHY to partially power-up before
|
|
* powering it up completely. delay value suggested by the HW
|
|
* team.
|
|
*/
|
|
mdelay(100);
|
|
}
|
|
|
|
static void omap_enable_usb3_phy(struct omap_xhci *omap)
|
|
{
|
|
u32 val;
|
|
|
|
val = (USBOTGSS_DMADISABLE |
|
|
USBOTGSS_STANDBYMODE_SMRT_WKUP |
|
|
USBOTGSS_IDLEMODE_NOIDLE);
|
|
writel(val, &omap->otg_wrapper->sysconfig);
|
|
|
|
/* Clear the utmi OTG status */
|
|
val = readl(&omap->otg_wrapper->utmi_otg_status);
|
|
writel(val, &omap->otg_wrapper->utmi_otg_status);
|
|
|
|
/* Enable interrupts */
|
|
writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0);
|
|
val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN |
|
|
USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN |
|
|
USBOTGSS_IRQ_SET_1_OEVT_EN);
|
|
writel(val, &omap->otg_wrapper->irqenable_set_1);
|
|
|
|
/* Clear the IRQ status */
|
|
val = readl(&omap->otg_wrapper->irqstatus_1);
|
|
writel(val, &omap->otg_wrapper->irqstatus_1);
|
|
val = readl(&omap->otg_wrapper->irqstatus_0);
|
|
writel(val, &omap->otg_wrapper->irqstatus_0);
|
|
};
|
|
#endif /* CONFIG_OMAP_USB3PHY1_HOST */
|
|
|
|
#ifdef CONFIG_OMAP_USB2PHY2_HOST
|
|
static void omap_enable_usb2_phy2(struct omap_xhci *omap)
|
|
{
|
|
u32 reg, val;
|
|
|
|
val = (~USB2PHY_AUTORESUME_EN & USB2PHY_DISCHGDET);
|
|
writel(val, (*ctrl)->control_srcomp_north_side);
|
|
|
|
setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl,
|
|
(USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K |
|
|
OTG_SS_CLKCTRL_MODULEMODE_HW));
|
|
|
|
/* This is an undocumented Reserved register */
|
|
reg = 0x4a0086c0;
|
|
val = readl(reg);
|
|
val |= 0x100;
|
|
setbits_le32(reg, val);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
return;
|
|
}
|
|
#endif /* CONFIG_OMAP_USB2PHY2_HOST */
|
|
|
|
#ifdef CONFIG_AM437X_USB2PHY2_HOST
|
|
static void am437x_enable_usb2_phy2(struct omap_xhci *omap)
|
|
{
|
|
const u32 usb_otg_ss_clk_val = (USBOTGSSX_CLKCTRL_MODULE_EN |
|
|
USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
|
|
|
|
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS0_CLKCTRL);
|
|
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS1_CLKCTRL);
|
|
|
|
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP0_CLKCTRL);
|
|
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP1_CLKCTRL);
|
|
}
|
|
|
|
void usb_phy_power(int on)
|
|
{
|
|
u32 val;
|
|
|
|
/* USB1_CTRL */
|
|
val = readl(USB1_CTRL);
|
|
if (on) {
|
|
/*
|
|
* these bits are re-used on AM437x to power up/down the USB
|
|
* CM and OTG PHYs, if we don't toggle them, USB will not be
|
|
* functional on newer silicon revisions
|
|
*/
|
|
val &= ~(USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN);
|
|
} else {
|
|
val |= USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN;
|
|
}
|
|
|
|
writel(val, USB1_CTRL);
|
|
}
|
|
#endif /* CONFIG_AM437X_USB2PHY2_HOST */
|
|
|
|
void omap_enable_phy(struct omap_xhci *omap)
|
|
{
|
|
#ifdef CONFIG_OMAP_USB2PHY2_HOST
|
|
omap_enable_usb2_phy2(omap);
|
|
#endif
|
|
|
|
#ifdef CONFIG_AM437X_USB2PHY2_HOST
|
|
am437x_enable_usb2_phy2(omap);
|
|
#endif
|
|
|
|
#ifdef CONFIG_OMAP_USB3PHY1_HOST
|
|
omap_enable_usb3_phy(omap);
|
|
omap_usb3_phy_init(omap->usb3_phy);
|
|
#endif
|
|
}
|