Miao Yan fa287b1580 x86: qemu: add the ability to load and link ACPI tables from QEMU ... This patch adds the ability to load and link ACPI tables provided by QEMU. QEMU tells guests how to load and patch ACPI tables through its fw_cfg interface, by adding a firmware file 'etc/table-loader'. Guests are supposed to parse this file and execute corresponding QEMU commands. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>		2016-01-28 13:53:30 +08:00
..
arch-baytrail	x86: fsp: Move struct fspinit_rtbuf definition to chipset header	2016-01-13 12:20:14 +08:00
arch-coreboot	Add more SPDX-License-Identifier tags	2016-01-19 08:31:21 -05:00
arch-efi	x86: Add support for U-Boot as an EFI application	2015-08-05 08:44:06 -06:00
arch-ivybridge	x86: ivybridge: Use syscon for the GMA device	2016-01-24 12:09:42 +08:00
arch-qemu	x86: qemu: setup PM IO base for ACPI in southbridge	2016-01-28 13:53:30 +08:00
arch-quark	x86: quark: Configure MTRR to enable cache	2015-09-16 19:53:53 -06:00
arch-queensbay	x86: fsp: Move struct fspinit_rtbuf definition to chipset header	2016-01-13 12:20:14 +08:00
fsp	x86: fsp: Set up init runtime buffer in update_fsp_configs()	2016-01-13 12:20:14 +08:00
video	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
acpi_table.h	x86: Generate a valid ACPI table	2015-08-26 07:54:13 -07:00
acpi.h	x86: Add a simple header file for ACPI	2014-11-25 06:34:00 -07:00
atomic.h	x86: Add atomic operations	2015-04-29 21:02:33 -06:00
bitops.h	x86: Use the generic bitops headers	2015-11-05 10:52:01 -05:00
bootm.h	x86: Move kernel boot function to arch/x86/lib/bootm.c	2014-10-28 20:43:58 -06:00
bootparam.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
byteorder.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
cache.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
config.h	generic-board: select SYS_GENERIC_BOARD for some architectures	2015-03-28 09:03:08 -04:00
control_regs.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
cpu_x86.h	x86: dm: Clean up cpu drivers	2015-07-14 18:03:15 -06:00
cpu.h	x86: ivybridge: Use syscon for the GMA device	2016-01-24 12:09:42 +08:00
e820.h	x86: Move install_e820_map() out of zimage.c	2015-10-21 07:46:25 -06:00
elf.h	x86: Add asm/elf.h for x86-specific ELF definitions	2015-08-05 08:44:05 -06:00
errno.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
fw_cfg.h	x86: qemu: add the ability to load and link ACPI tables from QEMU	2016-01-28 13:53:30 +08:00
global_data.h	x86: tsc: Remove legacy timer codes	2015-12-01 06:26:35 -07:00
gpio.h	x86: gpio: add pinctrl support from the device tree	2015-06-04 03:32:08 -06:00
i8254.h	x86: Fix cosmetic issues in the i8254 and i8259 codes	2015-11-13 06:46:17 -08:00
i8259.h	x86: Fix cosmetic issues in the i8254 and i8259 codes	2015-11-13 06:46:17 -08:00
ibmpc.h	x86: superio: Add keyboard controller support to smsc_lpc47m driver	2015-08-26 07:54:12 -07:00
init_helpers.h	x86: Remove calculate_relocation_address()	2015-08-26 07:54:07 -07:00
interrupt.h	x86: Rename CONFIG_SYS_NUM_IRQS to SYS_NUM_IRQS	2015-11-13 06:46:16 -08:00
io.h	Replace <compiler.h> with <linux/compiler.h>	2014-12-08 09:35:46 -05:00
ioapic.h	x86: Add I/O APIC register access routines	2015-07-14 18:03:17 -06:00
ioctl.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
irq.h	dm: x86: Drop the weak cpu_irq_init() function	2016-01-24 12:07:18 +08:00
ist.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
lapic.h	x86: Remove inline for lapic access routines	2015-07-14 18:03:17 -06:00
linkage.h	x86: move arch-specific asmlinkage to <asm/linkage.h>	2014-12-15 07:22:53 -07:00
mp.h	x86: Move MP initialization codes into a common place	2015-07-14 18:03:16 -06:00
mpspec.h	x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APIC	2015-07-28 10:36:24 -06:00
mrccache.h	x86: Use struct mrc_region to describe a mrc region	2015-10-21 07:46:27 -06:00
msr-index.h	x86: Add a CPU driver for baytrail	2015-04-30 16:13:50 -06:00
msr.h	x86: Add functions to set and clear bits on MSRs	2015-04-30 16:13:46 -06:00
mtrr.h	x86: Change pci option rom area MTRR setting to cacheable	2015-07-28 10:36:22 -06:00
pci.h	x86: Remove legacy pci codes	2015-11-13 06:46:25 -08:00
pirq_routing.h	x86: Support platform PIRQ routing	2015-04-29 18:51:49 -06:00
pnp_def.h	x86: Add a simple superio driver for SMSC LPC47M	2014-12-13 22:32:05 -07:00
posix_types.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
post.h	x86: Add post failure codes for bist and car	2014-12-13 22:32:05 -07:00
processor-flags.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
processor.h	x86: Add multi-processor init	2015-04-30 16:13:38 -06:00
ptrace.h	x86: Display correct CS/EIP/EFLAGS when there is an error code	2015-07-28 10:36:21 -06:00
relocate.h	x86: Drop unused copy_fdt_to_ram()	2015-08-05 08:42:40 -06:00
sections.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sfi.h	x86: Add support for the Simple Firmware Interface (SFI)	2015-04-29 21:02:33 -06:00
sipi.h	x86: Add multi-processor init	2015-04-30 16:13:38 -06:00
smbios.h	x86: Add SMBIOS table support	2015-10-21 07:46:26 -06:00
speedstep.h	x86: Add Intel speedstep and turbo mode code	2014-11-25 06:34:02 -07:00
string.h	x86: Import glibc memcpy implementation	2012-01-02 03:58:46 +11:00
tables.h	x86: Add MultiProcessor (MP) table APIs	2015-07-14 18:03:17 -06:00
turbo.h	x86: Add a CPU driver for baytrail	2015-04-30 16:13:50 -06:00
types.h	efi: Add 64-bit payload support	2015-08-05 08:44:07 -06:00
u-boot-x86.h	x86: baytrail: Add option to disable the internal UART to setup_early_uart()	2016-01-28 13:53:30 +08:00
u-boot.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
unaligned.h	x86: Rename i386 to x86	2011-04-13 19:43:28 +10:00
zimage.h	x86: Move install_e820_map() out of zimage.c	2015-10-21 07:46:25 -06:00