mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-06 03:06:16 +09:00
700a0c648d
Old, obsolete and duplicated code was cleaned up and replace by the new partitioning method. There are two possible approaches now: * define a single, static partition * use mtdparts command line option and dynamic partitioning Default is static partitioning.
450 lines
10 KiB
C
450 lines
10 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
|
|
*
|
|
* Support for the Elmeg VoVPN Gateway Module
|
|
* ------------------------------------------
|
|
* This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3
|
|
* and 28F128J3A flashs working in 8 Bit mode.
|
|
*
|
|
* Most of this code is taken from existing u-boot source code.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
|
|
|
|
#define FLASH_CMD_READ_ID 0x90
|
|
#define FLASH_CMD_READ_STATUS 0x70
|
|
#define FLASH_CMD_RESET 0xff
|
|
#define FLASH_CMD_BLOCK_ERASE 0x20
|
|
#define FLASH_CMD_ERASE_CONFIRM 0xd0
|
|
#define FLASH_CMD_CLEAR_STATUS 0x50
|
|
#define FLASH_CMD_SUSPEND_ERASE 0xb0
|
|
#define FLASH_CMD_WRITE 0x40
|
|
#define FLASH_CMD_WRITE_BUFF 0xe8
|
|
#define FLASH_CMD_PROG_RESUME 0xd0
|
|
#define FLASH_CMD_PROTECT 0x60
|
|
#define FLASH_CMD_PROTECT_SET 0x01
|
|
#define FLASH_CMD_PROTECT_CLEAR 0xd0
|
|
#define FLASH_STATUS_DONE 0x80
|
|
|
|
#define FLASH_WRITE_BUFFER_SIZE 32
|
|
|
|
#ifdef CFG_FLASH_16BIT
|
|
#define FLASH_WORD_SIZE unsigned short
|
|
#define FLASH_ID_MASK 0xffff
|
|
#define FLASH_CMD_ADDR_SHIFT 0
|
|
#else
|
|
#define FLASH_WORD_SIZE unsigned char
|
|
#define FLASH_ID_MASK 0xff
|
|
/* A0 is not used in either 8x or 16x for READ ID */
|
|
#define FLASH_CMD_ADDR_SHIFT 1
|
|
#endif
|
|
|
|
|
|
static unsigned long
|
|
flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
|
|
{
|
|
volatile FLASH_WORD_SIZE *p;
|
|
FLASH_WORD_SIZE value;
|
|
int i;
|
|
|
|
addr[0] = FLASH_CMD_READ_ID;
|
|
|
|
/* manufactor */
|
|
value = addr[0 << FLASH_CMD_ADDR_SHIFT];
|
|
switch (value) {
|
|
case (INTEL_MANUFACT & FLASH_ID_MASK):
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
break;
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
*addr = FLASH_CMD_RESET;
|
|
return (0);
|
|
|
|
}
|
|
|
|
/* device */
|
|
value = addr[1 << FLASH_CMD_ADDR_SHIFT];
|
|
switch (value) {
|
|
case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
|
|
info->flash_id += FLASH_28F320J3A;
|
|
info->sector_count = 32;
|
|
info->size = 0x00400000;
|
|
break;
|
|
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
|
|
info->flash_id += FLASH_28F640J3A;
|
|
info->sector_count = 64;
|
|
info->size = 0x00800000;
|
|
break;
|
|
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
|
|
info->flash_id += FLASH_28F128J3A;
|
|
info->sector_count = 128;
|
|
info->size = 0x01000000;
|
|
break;
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
*addr = FLASH_CMD_RESET;
|
|
return (0);
|
|
}
|
|
|
|
/* setup sectors */
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count);
|
|
}
|
|
|
|
/* check protected sectors */
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
p = (volatile FLASH_WORD_SIZE *)(info->start[i]);
|
|
info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1;
|
|
}
|
|
|
|
/* reset bank */
|
|
*addr = FLASH_CMD_RESET;
|
|
return (info->size);
|
|
}
|
|
|
|
unsigned long
|
|
flash_init(void)
|
|
{
|
|
unsigned long size;
|
|
int i;
|
|
|
|
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
}
|
|
size = flash_get((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE, &flash_info[0]);
|
|
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
|
printf ("## Unknown FLASH Size=0x%08lx\n", size);
|
|
return (0);
|
|
}
|
|
|
|
/* always protect 1 sector containing the HRCW */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
flash_info[0].start[0],
|
|
flash_info[0].start[1] - 1,
|
|
&flash_info[0]);
|
|
|
|
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_MONITOR_FLASH,
|
|
CFG_MONITOR_FLASH+CFG_MONITOR_LEN-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR,
|
|
CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
return (size);
|
|
}
|
|
|
|
void
|
|
flash_print_info(flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_INTEL: printf ("INTEL "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F320J3A: printf ("28F320JA3 (32 Mbit)\n");
|
|
break;
|
|
case FLASH_28F640J3A: printf ("28F640JA3 (64 Mbit)\n");
|
|
break;
|
|
case FLASH_28F128J3A: printf ("28F128JA3 (128 Mbit)\n");
|
|
break;
|
|
default: printf ("Unknown Chip Type");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " "
|
|
);
|
|
}
|
|
printf ("\n");
|
|
}
|
|
|
|
int
|
|
flash_erase(flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
unsigned long start, now, last;
|
|
int flag, prot, sect;
|
|
volatile FLASH_WORD_SIZE *addr;
|
|
FLASH_WORD_SIZE status;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("Cannot erase unknown flash - aborted\n");
|
|
return (1);
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
|
|
for (sect = s_first; sect<=s_last; sect++) {
|
|
if (info->protect[sect]) {
|
|
continue;
|
|
}
|
|
|
|
addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
#ifdef DEBUG
|
|
printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
|
|
#endif
|
|
|
|
*addr = FLASH_CMD_CLEAR_STATUS;
|
|
*addr = FLASH_CMD_BLOCK_ERASE;
|
|
*addr = FLASH_CMD_ERASE_CONFIRM;
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag) {
|
|
enable_interrupts();
|
|
}
|
|
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
|
|
if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
|
|
printf("Flash erase timeout at address %lx\n", info->start[sect]);
|
|
*addr = FLASH_CMD_SUSPEND_ERASE;
|
|
*addr = FLASH_CMD_RESET;
|
|
return (1);
|
|
}
|
|
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
*addr = FLASH_CMD_RESET;
|
|
}
|
|
printf (" done\n");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
write_buff2( volatile FLASH_WORD_SIZE *dst,
|
|
volatile FLASH_WORD_SIZE *src,
|
|
unsigned long cnt )
|
|
{
|
|
unsigned long start;
|
|
FLASH_WORD_SIZE status;
|
|
int flag, i;
|
|
|
|
start = get_timer (0);
|
|
while (1) {
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
dst[0] = FLASH_CMD_WRITE_BUFF;
|
|
if ((status = *dst) & FLASH_STATUS_DONE) {
|
|
break;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag) {
|
|
enable_interrupts();
|
|
}
|
|
|
|
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
|
|
return (-1);
|
|
}
|
|
}
|
|
dst[0] = (FLASH_WORD_SIZE)(cnt - 1);
|
|
for (i=0; i<cnt; i++) {
|
|
dst[i] = src[i];
|
|
}
|
|
dst[0] = FLASH_CMD_PROG_RESUME;
|
|
|
|
if (flag) {
|
|
enable_interrupts();
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
static int
|
|
poll_status( volatile FLASH_WORD_SIZE *addr )
|
|
{
|
|
unsigned long start;
|
|
|
|
start = get_timer (0);
|
|
/* wait for error or finish */
|
|
while (1) {
|
|
if (*addr == FLASH_STATUS_DONE) {
|
|
if (*addr == FLASH_STATUS_DONE) {
|
|
break;
|
|
}
|
|
}
|
|
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
|
|
*addr = FLASH_CMD_RESET;
|
|
return (-1);
|
|
}
|
|
}
|
|
*addr = FLASH_CMD_RESET;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* write_buff return values:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
* 4 - Flash not identified
|
|
*/
|
|
int
|
|
write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
|
|
{
|
|
volatile FLASH_WORD_SIZE *addr, *dst;
|
|
unsigned long bcnt;
|
|
int flag, i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
return (4);
|
|
}
|
|
|
|
addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
|
|
dst = (volatile FLASH_WORD_SIZE *) udst;
|
|
|
|
#ifdef CFG_FLASH_16BIT
|
|
#error NYI
|
|
#else
|
|
while (cnt > 0) {
|
|
/* Check if buffer write is possible */
|
|
if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) {
|
|
bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt;
|
|
/* Check if Flash is (sufficiently) erased */
|
|
for (i=0; i<bcnt; i++) {
|
|
if ((dst[i] & src[i]) != src[i]) {
|
|
return (2);
|
|
}
|
|
}
|
|
if (write_buff2( dst,src,bcnt ) != 0) {
|
|
addr[0] = FLASH_CMD_READ_STATUS;
|
|
}
|
|
if (poll_status( dst ) != 0) {
|
|
return (1);
|
|
}
|
|
cnt -= bcnt;
|
|
dst += bcnt;
|
|
src += bcnt;
|
|
continue;
|
|
}
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dst & *src) != *src) {
|
|
return (2);
|
|
}
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
addr[0] = FLASH_CMD_ERASE_CONFIRM;
|
|
addr[0] = FLASH_CMD_WRITE;
|
|
*dst++ = *src++;
|
|
/* re-enable interrupts if necessary */
|
|
if (flag) {
|
|
enable_interrupts();
|
|
}
|
|
|
|
if (poll_status( dst ) != 0) {
|
|
return (1);
|
|
}
|
|
cnt --;
|
|
}
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
flash_real_protect(flash_info_t *info, long sector, int prot)
|
|
{
|
|
volatile FLASH_WORD_SIZE *addr;
|
|
unsigned long start;
|
|
|
|
addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]);
|
|
*addr = FLASH_CMD_CLEAR_STATUS;
|
|
*addr = FLASH_CMD_PROTECT;
|
|
|
|
if(prot) {
|
|
*addr = FLASH_CMD_PROTECT_SET;
|
|
} else {
|
|
*addr = FLASH_CMD_PROTECT_CLEAR;
|
|
}
|
|
|
|
/* wait for error or finish */
|
|
start = get_timer (0);
|
|
while(!(addr[0] & FLASH_STATUS_DONE)){
|
|
if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
|
|
printf("Flash protect timeout at address %lx\n", info->start[sector]);
|
|
addr[0] = FLASH_CMD_RESET;
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/* Set software protect flag */
|
|
info->protect[sector] = prot;
|
|
*addr = FLASH_CMD_RESET;
|
|
return (0);
|
|
}
|