mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Marcin Niestroj](/assets/img/avatar_default.png)
chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
32 lines
726 B
Plaintext
32 lines
726 B
Plaintext
How to use U-Boot on Grinn's chiliBoard
|
|
--------------------------------------
|
|
|
|
- Build U-Boot for chiliBoard:
|
|
|
|
$ make mrproper
|
|
$ make chiliboard_defconfig
|
|
$ make
|
|
|
|
This will generate the SPL image called MLO and the u-boot.img.
|
|
|
|
- Flash the SPL image into the micro SD card:
|
|
|
|
sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync
|
|
|
|
- Flash the u-boot.img image into the micro SD card:
|
|
|
|
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync
|
|
|
|
- Jumper settings:
|
|
|
|
S2: 1 1 1 0 1 0
|
|
|
|
where 0 means bottom position and 1 means top position (from the
|
|
switch label numbers reference).
|
|
|
|
- Insert the micro SD card in the board.
|
|
|
|
- Connect USB cable between chiliBoard and the PC for the power and console.
|
|
|
|
- U-Boot messages should come up.
|