u-boot-brain/include/asm-generic/u-boot.h
Heiko Schocher 5025897774 powerpc, 5xx: remove support for 5xx
There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:38:05 -04:00

141 lines
5.1 KiB
C

/*
* Copyright (c) 2011 The Chromium OS Authors.
*
* (C) Copyright 2000 - 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef __ASM_GENERIC_U_BOOT_H__
#define __ASM_GENERIC_U_BOOT_H__
/*
* Board information passed to Linux kernel from U-Boot
*
* include/asm-ppc/u-boot.h
*/
#ifndef __ASSEMBLY__
typedef struct bd_info {
unsigned long bi_memstart; /* start of DRAM memory */
phys_size_t bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
#ifdef CONFIG_AVR32
unsigned char bi_phy_id[4]; /* PHY address for ATAG_ETHERNET */
unsigned long bi_board_number;/* ATAG_BOARDINFO */
#endif
#ifdef CONFIG_ARM
unsigned long bi_arm_freq; /* arm frequency */
unsigned long bi_dsp_freq; /* dsp core frequency */
unsigned long bi_ddr_freq; /* ddr frequency */
#endif
#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
unsigned long bi_mbar_base; /* base of internal registers */
#endif
#if defined(CONFIG_MPC83xx)
unsigned long bi_immrbar;
#endif
unsigned long bi_bootflags; /* boot / reboot flag (Unused) */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
#if defined(CONFIG_CPM2)
unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
unsigned long bi_vco; /* VCO Out from PLL, in MHz */
#endif
#if defined(CONFIG_MPC512X)
unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
#if defined(CONFIG_EXTRA_CLOCK)
unsigned long bi_inpfreq; /* input Freq in MHz */
unsigned long bi_vcofreq; /* vco Freq in MHz */
unsigned long bi_flbfreq; /* Flexbus Freq in MHz */
#endif
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || \
defined(CONFIG_440)
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
#ifdef CONFIG_HAS_ETH1
unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
#endif
#ifdef CONFIG_HAS_ETH2
unsigned char bi_enet2addr[6]; /* OLD: see README.enetaddr */
#endif
#ifdef CONFIG_HAS_ETH3
unsigned char bi_enet3addr[6]; /* OLD: see README.enetaddr */
#endif
#ifdef CONFIG_HAS_ETH4
unsigned char bi_enet4addr[6]; /* OLD: see README.enetaddr */
#endif
#ifdef CONFIG_HAS_ETH5
unsigned char bi_enet5addr[6]; /* OLD: see README.enetaddr */
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_4xx)
#if defined(CONFIG_440GX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
#elif defined(CONFIG_405EP) || defined(CONFIG_405EX) || defined(CONFIG_440)
int bi_phynum[2]; /* Determines phy mapping */
int bi_phymode[2]; /* Determines phy mode */
#else
int bi_phynum[1]; /* Determines phy mapping */
int bi_phymode[1]; /* Determines phy mode */
#endif
#endif /* defined(CONFIG_4xx) */
ulong bi_arch_number; /* unique id for this board */
ulong bi_boot_params; /* where this board expects params */
#ifdef CONFIG_NR_DRAM_BANKS
struct { /* RAM configuration */
phys_addr_t start;
phys_size_t size;
} bi_dram[CONFIG_NR_DRAM_BANKS];
#endif /* CONFIG_NR_DRAM_BANKS */
} bd_t;
#endif /* __ASSEMBLY__ */
#endif /* __ASM_GENERIC_U_BOOT_H__ */