Jagan Teki f4b7532f82 arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support ... Boot Log for i.CoreM6 DualLite/Solo Starter Kit: ----------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6SOLO rev1.3 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 31C Reset cause: POR DRAM: 256 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device switch to partitions #0, OK mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading zImage 6741808 bytes read in 341 ms (18.9 MiB/s) Booting from mmc ... reading imx6dl-icore.dtb 30600 bytes read in 19 ms (1.5 MiB/s) Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a787 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 Boot Log for i.CoreM6 Quad/Dual Starter Kit: -------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6Q rev1.2 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 28C Reset cause: POR DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>		2016-10-26 16:53:16 +02:00
..
boot_mode.h	imx: imx7d: Add SoC system support	2015-09-13 10:11:53 +02:00
dma.h	imx: apbh_dma: Update APBH-DMA for MX7D	2016-01-24 12:09:16 +01:00
gpio.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hab.h	imx: hab: add secure boot fuse details	2015-10-30 15:22:36 +01:00
imximage.cfg	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
iomux-v3.h	imx-common: enlarge mux width to 4	2016-10-04 19:37:28 +02:00
mx5_video.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mxc_i2c.h	dm: i2c: mxc_i2c: implement i2c_idle_bus	2016-03-28 09:22:58 +02:00
rdc-sema.h	imx: imx-common: introduce Resource Domain Controller support	2016-02-21 11:46:26 +01:00
regs-apbh.h	imx: apbh_dma: Update APBH-DMA for MX7D	2016-01-24 12:09:16 +01:00
regs-bch.h	imx: nand: update GPMI NAND driver to support MX7	2016-01-24 12:09:32 +01:00
regs-common.h	imx: include linux/types.h for regs-common.h	2015-11-12 17:38:08 +01:00
regs-gpmi.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
regs-lcdif.h	imx: lcdif: use one register structure for i.MXes	2015-11-12 17:38:09 +01:00
regs-usbphy.h	usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's	2015-04-23 14:56:09 -04:00
sata.h	nitrogen6x: Move setup_sata to common part	2013-12-17 18:12:14 +01:00
spi.h	ARM: i.MX: provide declaration for board_spi_cs_gpio	2014-10-21 10:47:14 +02:00
sys_proto.h	arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support	2016-10-26 16:53:16 +02:00
syscounter.h	imx: system counter driver for imx7d and mx6ul	2015-09-13 10:11:53 +02:00
video.h	video, ipu: make ldb clock frequency overwritable through board code	2015-04-20 09:36:59 +02:00