Patrice Chotard 4e97e25723 clk: clk_stm32fx: add clock configuration for mmc usage ... MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>		2017-11-29 22:30:50 -05:00
..
arc	arc: cache: Add required NOPs after invalidation of instruction cache	2017-11-24 19:38:23 +03:00
arm	clk: clk_stm32fx: add clock configuration for mmc usage	2017-11-29 22:30:50 -05:00
m68k	m68k: Use asm-generic/io.h	2017-10-02 21:52:20 -04:00
microblaze	microblaze: Use asm-generic/io.h	2017-10-02 21:52:21 -04:00
mips	MIPS: Break out of cache loops for unimplemented caches	2017-11-28 21:59:30 +01:00
nds32	nds32: dts: Support ftsdc010 DM.	2017-11-30 10:04:21 +08:00
nios2	nios2: 10m50: Add CPU pre-relocation in device tree	2017-11-17 10:51:24 -05:00
powerpc	powerpc: mpc85xx: Implement CPU erratum A-007907 for secondary cores	2017-10-23 14:02:48 -07:00
sandbox	sandbox: Add clrbits/setbits macros	2017-11-16 18:45:05 -07:00
sh	sh: Use asm-generic/io.h	2017-10-02 21:52:21 -04:00
x86	pylibfdt: compile pylibfdt only when dtoc/binman is necessary	2017-11-17 07:43:32 -05:00
xtensa	xtensa: Use asm-generic/io.h	2017-10-02 21:52:22 -04:00
.gitignore
Kconfig	usb: net: migrate USB Ethernet adapters to Kconfig	2017-09-08 10:23:00 -04:00