mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Jan Kiszka](/assets/img/avatar_default.png)
CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to be taken into account additionally. CONFIG_ARMV7_PSCI is only set on boards that support CONFIG_ARMV7_NONSEC, and it only works on those. CC: Tang Yuantian <Yuantian.Tang@freescale.com> CC: York Sun <yorksun@freescale.com> CC: Steve Rae <srae@broadcom.com> CC: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
198 lines
4.6 KiB
C
198 lines
4.6 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* (C) Copyright 2004
|
|
* ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/systimer.h>
|
|
#include <asm/arch/sysctrl.h>
|
|
#include <asm/arch/wdt.h>
|
|
#include "../drivers/mmc/arm_pl180_mmci.h"
|
|
|
|
static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01;
|
|
static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
|
|
|
|
static void flash__init(void);
|
|
static void vexpress_timer_init(void);
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
|
|
void show_boot_progress(int progress)
|
|
{
|
|
printf("Boot reached stage %d\n", progress);
|
|
}
|
|
#endif
|
|
|
|
static inline void delay(ulong loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b" : "=r" (loops) : "0" (loops));
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
|
|
gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS;
|
|
gd->flags = 0;
|
|
|
|
icache_enable();
|
|
flash__init();
|
|
vexpress_timer_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_SMC911X
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
(void) bis;
|
|
#ifdef CONFIG_ARM_PL180_MMCI
|
|
struct pl180_mmc_host *host;
|
|
|
|
host = malloc(sizeof(struct pl180_mmc_host));
|
|
if (!host)
|
|
return -ENOMEM;
|
|
memset(host, 0, sizeof(*host));
|
|
|
|
strcpy(host->name, "MMC");
|
|
host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
|
|
host->pwr_init = INIT_PWR;
|
|
host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
|
|
host->voltages = VOLTAGE_WINDOW_MMC;
|
|
host->caps = 0;
|
|
host->clock_in = ARM_MCLK;
|
|
host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
|
|
host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
|
|
rc = arm_pl180_mmci_init(host);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
static void flash__init(void)
|
|
{
|
|
/* Setup the sytem control register to allow writing to flash */
|
|
writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN,
|
|
&sysctrl_base->scflashctrl);
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size =
|
|
get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size =
|
|
get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
gd->bd->bi_dram[1].size =
|
|
get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Start timer:
|
|
* Setup a 32 bit timer, running at 1KHz
|
|
* Versatile Express Motherboard provides 1 MHz timer
|
|
*/
|
|
static void vexpress_timer_init(void)
|
|
{
|
|
/*
|
|
* Set clock frequency in system controller:
|
|
* VEXPRESS_REFCLK is 32KHz
|
|
* VEXPRESS_TIMCLK is 1MHz
|
|
*/
|
|
writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL |
|
|
SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL |
|
|
readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl);
|
|
|
|
/*
|
|
* Set Timer0 to be:
|
|
* Enabled, free running, no interrupt, 32-bit, wrapping
|
|
*/
|
|
writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
|
|
writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
|
|
writel(SYSTIMER_EN | SYSTIMER_32BIT |
|
|
readl(&systimer_base->timer0control),
|
|
&systimer_base->timer0control);
|
|
}
|
|
|
|
int v2m_cfg_write(u32 devfn, u32 data)
|
|
{
|
|
/* Configuration interface broken? */
|
|
u32 val;
|
|
|
|
devfn |= SYS_CFG_START | SYS_CFG_WRITE;
|
|
|
|
val = readl(V2M_SYS_CFGSTAT);
|
|
writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT);
|
|
|
|
writel(data, V2M_SYS_CFGDATA);
|
|
writel(devfn, V2M_SYS_CFGCTRL);
|
|
|
|
do {
|
|
val = readl(V2M_SYS_CFGSTAT);
|
|
} while (val == 0);
|
|
|
|
return !!(val & SYS_CFG_ERR);
|
|
}
|
|
|
|
/* Use the ARM Watchdog System to cause reset */
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
|
|
printf("Unable to reboot\n");
|
|
}
|
|
|
|
void lowlevel_init(void)
|
|
{
|
|
}
|
|
|
|
ulong get_board_rev(void){
|
|
return readl((u32 *)SYS_ID);
|
|
}
|
|
|
|
#ifdef CONFIG_ARMV7_NONSEC
|
|
/* Setting the address at which secondary cores start from.
|
|
* Versatile Express uses one address for all cores, so ignore corenr
|
|
*/
|
|
void smp_set_core_boot_addr(unsigned long addr, int corenr)
|
|
{
|
|
/* The SYSFLAGS register on VExpress needs to be cleared first
|
|
* by writing to the next address, since any writes to the address
|
|
* at offset 0 will only be ORed in
|
|
*/
|
|
writel(~0, CONFIG_SYSFLAGS_ADDR + 4);
|
|
writel(addr, CONFIG_SYSFLAGS_ADDR);
|
|
}
|
|
#endif
|