.. |
am33xx
|
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
|
2015-03-04 14:55:04 -05:00 |
armada-xp
|
arm: armada-xp: Add SPL support used to include the DDR training code
|
2015-02-06 17:24:56 +01:00 |
bcm281xx
|
bcm281xx: add support for "USB OTG clock"
|
2014-12-29 16:31:23 -05:00 |
bcm2835
|
bcm2836 SoC support (used in Raspberry Pi 2 model B)
|
2015-02-21 08:27:48 -05:00 |
bcmcygnus
|
arm: bcmcygnus: Add bcmcygnus u-architecture
|
2014-08-30 07:46:40 -04:00 |
bcmnsp
|
arm: bcmnsp: Add bcmnsp u-architecture
|
2014-08-30 07:46:40 -04:00 |
exynos
|
Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800
|
2015-02-28 18:03:46 +09:00 |
iproc-common
|
arm: iproc: Initial commit of iproc architecture code
|
2014-08-30 07:46:40 -04:00 |
kona-common
|
bcm281xx: add support for "USB OTG clock"
|
2014-12-29 16:31:23 -05:00 |
ls102xa
|
arm: ls102xa: workaround for cache coherency problem
|
2015-02-24 13:10:59 -08:00 |
mx5
|
imx: consolidate set_chipselect_size function
|
2014-11-20 10:30:19 +01:00 |
mx6
|
mx6: soc: Switch to cold reset
|
2015-03-13 13:29:42 +01:00 |
omap3
|
ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766
|
2015-03-13 09:29:33 -04:00 |
omap4
|
ARM: OMAP: Change set_pl310_ctrl_reg to be generic
|
2015-03-13 09:28:55 -04:00 |
omap5
|
ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration
|
2015-03-13 09:29:13 -04:00 |
omap-common
|
ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1
|
2015-03-13 09:29:00 -04:00 |
rmobile
|
arm: rmobile: Add Porter board support
|
2015-02-25 14:17:49 +09:00 |
s5p-common
|
armv7: convert makefiles to Kbuild style
|
2013-10-31 12:53:39 -04:00 |
s5pc1xx
|
kconfig: remove unneeded dependency on !SPL_BUILD
|
2015-02-24 17:06:27 -05:00 |
socfpga
|
socfpga: Drop redundant save_boot_params
|
2015-01-05 15:13:44 -05:00 |
stv0991
|
stv0991: enable ethernet support
|
2014-12-09 15:16:19 -05:00 |
sunxi
|
sunxi: Support the FEL boot mode in the regular u-boot build
|
2015-02-16 20:23:52 +01:00 |
u8500
|
armv7: convert makefiles to Kbuild style
|
2013-10-31 12:53:39 -04:00 |
vf610
|
arm: vf610: improve evaluation of reset source
|
2014-12-01 10:20:22 +01:00 |
zynq
|
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
|
2015-01-26 06:42:15 -05:00 |
arch_timer.c
|
arm: add support for arch timer
|
2014-04-17 17:24:38 -04:00 |
cache_v7.c
|
ARM: cache_v7: Various minor cleanups
|
2014-11-12 07:25:41 +01:00 |
config.mk
|
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
2014-02-26 16:49:58 -05:00 |
cp15.c
|
ARM: Introduce erratum workaround for 454179
|
2015-03-13 09:28:48 -04:00 |
cpu.c
|
ARM: armv7 fix spelling of SCTRL
|
2015-01-30 09:19:17 -05:00 |
Kconfig
|
ARM: bootm: Allow booting in secure mode on hyp capable systems
|
2014-11-24 09:09:52 +01:00 |
lowlevel_init.S
|
arm: Reduce the scope of lowlevel_init()
|
2015-03-04 14:55:04 -05:00 |
Makefile
|
ARM: Introduce erratum workaround for 798870
|
2015-03-13 09:28:29 -04:00 |
nonsec_virt.S
|
ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
|
2014-12-11 09:41:45 -08:00 |
psci.S
|
ARM: HYP/non-sec: add generic ARMv7 PSCI code
|
2014-07-28 17:19:18 +02:00 |
start.S
|
ARM: Introduce erratum workaround for 621766
|
2015-03-13 09:28:53 -04:00 |
syslib.c
|
ARM: OMAP: hide custom bit manipulation function sr32()
|
2014-04-17 14:39:54 -04:00 |
virt-dt.c
|
ARM: PSCI: Rework the DT handler slightly
|
2015-03-09 11:13:29 -04:00 |
virt-v7.c
|
ARM: HYP/non-sec: relocation before enable secondary cores
|
2015-03-01 16:33:21 +01:00 |