mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-05 02:36:39 +09:00
2a4741d9a1
The pxa255_idp being an old unmaintained board showed several issues: 1. CONFIG_INIT_CRITICAL was still defined. 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. 3. Symbol flash_addr was undeclared. 4. The boards lowlevel_init function was still called memsetup. 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. 6. Using -march=armv5 instead of -march=armv5te resulted in lots of 'target CPU does not support interworking' warnings on recent compilers. 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as indexes rather than the register definitions from the pxa-regs header file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to avoid any ambiguities. 8. There were several redefinition warnings concerning ICMR, OSMR3, OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. 9. The board configuration file was rather outdated. 10. The part header file defined the vendor, product and revision arrays as unsigned chars instead of just chars in the block_dev_desc_t structure. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
355 lines
9.7 KiB
C
355 lines
9.7 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* Copied from lubbock.h
|
|
*
|
|
* (C) Copyright 2004
|
|
* BEC Systems <http://bec-systems.com>
|
|
* Cliff Brake <cliff.brake@gmail.com>
|
|
* Configuation settings for the Accelent/Vibren PXA255 IDP
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
/*
|
|
* If we are developing, we might want to start U-Boot from RAM
|
|
* so we MUST NOT initialize critical regs like mem-timing ...
|
|
*/
|
|
#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
|
|
#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */
|
|
|
|
/*
|
|
* define the following to enable debug blinks. A debug blink function
|
|
* must be defined in memsetup.S
|
|
*/
|
|
#undef DEBUG_BLINK_ENABLE
|
|
#undef DEBUG_BLINKC_ENABLE
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
|
|
|
|
#undef CONFIG_LCD
|
|
#ifdef CONFIG_LCD
|
|
#define CONFIG_SHARP_LM8V31
|
|
#endif
|
|
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#define BOARD_LATE_INIT 1
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* PXA250 IDP memory map information
|
|
*/
|
|
|
|
#define IDP_CS5_ETH_OFFSET 0x03400000
|
|
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_SMC91111
|
|
#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
|
|
#define CONFIG_SMC_USE_32_BIT 1
|
|
/* #define CONFIG_SMC_USE_IOFUNCS */
|
|
|
|
/* the following has to be set high -- suspect something is wrong with
|
|
* with the tftp timeout routines. FIXME!!!
|
|
*/
|
|
#define CONFIG_NET_RETRY_COUNT 100
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTCOMMAND "bootm 40000"
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
/*
|
|
* Current memory map for Vibren supplied Linux images:
|
|
*
|
|
* Flash:
|
|
* 0 - 0x3ffff (size = 0x40000): bootloader
|
|
* 0x40000 - 0x13ffff (size = 0x100000): kernel
|
|
* 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
|
|
*
|
|
* RAM:
|
|
* 0xa0008000 - kernel is loaded
|
|
* 0xa3000000 - Uboot runs (48MB into RAM)
|
|
*
|
|
*/
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"prog_boot_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x40000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 u-boot.bin; " \
|
|
"then " \
|
|
"protect off 0x0 0x3ffff; " \
|
|
"erase 0x0 0x3ffff; " \
|
|
"cp.b 0xa0000000 0x0 0x40000; " \
|
|
"reset;" \
|
|
"fi\0" \
|
|
"prog_uzImage_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 uzImage; " \
|
|
"then " \
|
|
"protect off 0x40000 0xfffff; " \
|
|
"erase 0x40000 0xfffff; " \
|
|
"cp.b 0xa0000000 0x40000 0x100000; " \
|
|
"fi\0" \
|
|
"prog_jffs_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x1e00000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 root.jffs; " \
|
|
"then " \
|
|
"protect off 0x140000 0x1f3ffff; " \
|
|
"erase 0x140000 0x1f3ffff; " \
|
|
"cp.b 0xa0000000 0x140000 0x1e00000; " \
|
|
"fi\0" \
|
|
"boot_mmc=" \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa1000000 uzImage && " \
|
|
"then " \
|
|
"bootm 0xa1000000; " \
|
|
"fi\0" \
|
|
"prog_boot_net=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if bootp 0xa0000000 u-boot.bin; " \
|
|
"then " \
|
|
"protect off 0x0 0x3ffff; " \
|
|
"erase 0x0 0x3ffff; " \
|
|
"cp.b 0xa0000000 0x0 0x40000; " \
|
|
"reset; " \
|
|
"fi\0" \
|
|
"prog_uzImage_net=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if bootp 0xa0000000 uzImage; " \
|
|
"then " \
|
|
"protect off 0x40000 0xfffff; " \
|
|
"erase 0x40000 0xfffff; " \
|
|
"cp.b 0xa0000000 0x40000 0x100000; " \
|
|
"fi\0" \
|
|
"prog_jffs_net=" \
|
|
"mw.b 0xa0000000 0xff 0x1e00000; " \
|
|
"if bootp 0xa0000000 root.jffs; " \
|
|
"then " \
|
|
"protect off 0x140000 0x1f3ffff; " \
|
|
"erase 0x140000 0x1f3ffff; " \
|
|
"cp.b 0xa0000000 0x140000 0x1e00000; " \
|
|
"fi\0"
|
|
|
|
|
|
/* "erase_env=" */
|
|
/* "protect off" */
|
|
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_HUSH_PARSER 1
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT "$ " /* Monitor Command Prompt */
|
|
#else
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#endif
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_DEVICE_NULLDEV 1
|
|
|
|
#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0xa0800000 /* default load address */
|
|
|
|
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
|
|
#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
|
|
|
|
#define RTC 1 /* enable 32KHz osc */
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CFG_MMC_BASE 0xF0000000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 4 /* we have 1 banks of DRAM */
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
|
|
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
|
|
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
|
|
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
|
|
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
|
|
#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
|
|
#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
|
|
|
|
#define CFG_DRAM_BASE 0xa0000000
|
|
#define CFG_DRAM_SIZE 0x04000000
|
|
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*
|
|
* GPIO settings
|
|
*/
|
|
|
|
#define CFG_GAFR0_L_VAL 0x80001005
|
|
#define CFG_GAFR0_U_VAL 0xa5128012
|
|
#define CFG_GAFR1_L_VAL 0x699a9558
|
|
#define CFG_GAFR1_U_VAL 0xaaa5aa6a
|
|
#define CFG_GAFR2_L_VAL 0xaaaaaaaa
|
|
#define CFG_GAFR2_U_VAL 0x2
|
|
#define CFG_GPCR0_VAL 0x1800400
|
|
#define CFG_GPCR1_VAL 0x0
|
|
#define CFG_GPCR2_VAL 0x0
|
|
#define CFG_GPDR0_VAL 0xc1818440
|
|
#define CFG_GPDR1_VAL 0xfcffab82
|
|
#define CFG_GPDR2_VAL 0x1ffff
|
|
#define CFG_GPSR0_VAL 0x8000
|
|
#define CFG_GPSR1_VAL 0x3f0002
|
|
#define CFG_GPSR2_VAL 0x1c000
|
|
|
|
#define CFG_PSSR_VAL 0x20
|
|
|
|
/*
|
|
* Memory settings
|
|
*/
|
|
#define CFG_MSC0_VAL 0x29DCA4D2
|
|
#define CFG_MSC1_VAL 0x43AC494C
|
|
#define CFG_MSC2_VAL 0x39D449D4
|
|
#define CFG_MDCNFG_VAL 0x090009C9
|
|
#define CFG_MDREFR_VAL 0x0085C017
|
|
#define CFG_MDMRS_VAL 0x00220022
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CFG_MECR_VAL 0x00000003
|
|
#define CFG_MCMEM0_VAL 0x00014405
|
|
#define CFG_MCMEM1_VAL 0x00014405
|
|
#define CFG_MCATT0_VAL 0x00014405
|
|
#define CFG_MCATT1_VAL 0x00014405
|
|
#define CFG_MCIO0_VAL 0x00014405
|
|
#define CFG_MCIO1_VAL 0x00014405
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_FLASH_CFI
|
|
#define CFG_FLASH_CFI_DRIVER 1
|
|
|
|
#define CFG_MONITOR_BASE 0
|
|
#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
#define CFG_FLASH_USE_BUFFER_WRITE 1
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
/* put cfg at end of flash for now */
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
/* Addr of Environment Sector */
|
|
#define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
|
|
#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
|
|
#define CFG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
|
|
|
|
#endif /* __CONFIG_H */
|