mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![Andreas Bießmann](/assets/img/avatar_default.png)
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Acked-by: Scott Wood <scottwood@freescale.com>
373 lines
9.6 KiB
C
373 lines
9.6 KiB
C
/*
|
|
* (C) Copyright 2010-2011
|
|
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
|
|
* esd electronic system design gmbh <www.esd.eu>
|
|
*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/at91_matrix.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <netdev.h>
|
|
#ifdef CONFIG_LCD
|
|
# include <atmel_lcdc.h>
|
|
# include <lcd.h>
|
|
# ifdef CONFIG_LCD_INFO
|
|
# include <nand.h>
|
|
# include <version.h>
|
|
# endif
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
|
|
static int hw_rev = -1; /* hardware revision */
|
|
|
|
int get_hw_rev(void)
|
|
{
|
|
if (hw_rev >= 0)
|
|
return hw_rev;
|
|
|
|
hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
|
|
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
|
|
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
|
|
hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
|
|
|
|
if (hw_rev == 15)
|
|
hw_rev = 0;
|
|
|
|
return hw_rev;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
static void otc570_nand_hw_init(void)
|
|
{
|
|
unsigned long csa;
|
|
at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
|
|
at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
|
|
|
|
/* Enable CS3 */
|
|
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
|
|
writel(csa, &matrix->csa[0]);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
|
|
AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2),
|
|
&smc->cs[3].setup);
|
|
|
|
writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
|
|
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
|
|
&smc->cs[3].pulse);
|
|
|
|
writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6),
|
|
&smc->cs[3].cycle);
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
|
AT91_SMC_MODE_EXNW_DISABLE |
|
|
AT91_SMC_MODE_DBW_8 |
|
|
AT91_SMC_MODE_TDF_CYCLE(12),
|
|
&smc->cs[3].mode);
|
|
|
|
/* Configure RDY/BSY */
|
|
gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
|
|
|
|
/* Enable NandFlash */
|
|
gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
|
}
|
|
#endif /* CONFIG_CMD_NAND */
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void otc570_macb_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
|
|
at91_macb_hw_init();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
|
|
* controller debugging
|
|
* The ET1100 is located at physical address 0x70000000
|
|
* Its process memory is located at physical address 0x70001000
|
|
*/
|
|
static void otc570_ethercat_hw_init(void)
|
|
{
|
|
at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1;
|
|
|
|
/* Configure SMC EBI1_CS0 for EtherCAT */
|
|
writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
|
|
AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
|
|
&smc1->cs[0].setup);
|
|
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
|
|
AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
|
|
&smc1->cs[0].pulse);
|
|
writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
|
|
&smc1->cs[0].cycle);
|
|
/*
|
|
* Configure behavior at external wait signal, byte-select mode, 16 bit
|
|
* data bus width, none data float wait states and TDF optimization
|
|
*/
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
|
|
AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
|
|
AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
|
|
|
|
/* Configure RDY/BSY */
|
|
at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */
|
|
}
|
|
|
|
#ifdef CONFIG_LCD
|
|
/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */
|
|
vidinfo_t panel_info = {
|
|
.vl_col = 640,
|
|
.vl_row = 480,
|
|
.vl_clk = 25175000,
|
|
.vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
|
|
ATMEL_LCDC_INVFRAME_INVERTED,
|
|
|
|
.vl_bpix = LCD_BPP,/* Bits per pixel, 0 = 1bit, 3 = 8bit */
|
|
.vl_tft = 1, /* 0 = passive, 1 = TFT */
|
|
.vl_vsync_len = 1, /* Length of vertical sync in NOL */
|
|
.vl_upper_margin = 35, /* Idle lines at the frame start */
|
|
.vl_lower_margin = 5, /* Idle lines at the end of the frame */
|
|
.vl_hsync_len = 5, /* Width of the LCDHSYNC pulse */
|
|
.vl_left_margin = 112, /* Idle cycles at the line beginning */
|
|
.vl_right_margin = 1, /* Idle cycles at the end of the line */
|
|
|
|
.mmio = ATMEL_BASE_LCDC,
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */
|
|
}
|
|
|
|
static void otc570_lcd_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
|
|
at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 30, 1); /* PCI */
|
|
|
|
writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
|
|
}
|
|
|
|
#ifdef CONFIG_LCD_INFO
|
|
void lcd_show_board_info(void)
|
|
{
|
|
ulong dram_size, nand_size;
|
|
int i;
|
|
char temp[32];
|
|
|
|
dram_size = 0;
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
|
|
dram_size += gd->bd->bi_dram[i].size;
|
|
nand_size = 0;
|
|
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
|
nand_size += nand_info[i].size;
|
|
|
|
lcd_printf("\n%s\n", U_BOOT_VERSION);
|
|
lcd_printf("CPU at %s MHz\n", strmhz(temp, get_cpu_clk_rate()));
|
|
lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
|
|
dram_size >> 20,
|
|
nand_size >> 20 );
|
|
lcd_printf(" Board : esd ARM9 HMI Panel - OTC570\n");
|
|
lcd_printf(" Hardware-revision: 1.%d\n", get_hw_rev());
|
|
lcd_printf(" Mach-type : %lu\n", gd->bd->bi_arch_number);
|
|
}
|
|
#endif /* CONFIG_LCD_INFO */
|
|
#endif /* CONFIG_LCD */
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size(
|
|
(void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_MACB
|
|
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char str[32];
|
|
|
|
puts("Board : esd ARM9 HMI Panel - OTC570");
|
|
if (getenv_f("serial#", str, sizeof(str)) > 0) {
|
|
puts(", serial# ");
|
|
puts(str);
|
|
}
|
|
printf("\n");
|
|
printf("Hardware-revision: 1.%d\n", get_hw_rev());
|
|
printf("Mach-type : %lu\n", gd->bd->bi_arch_number);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_TAG
|
|
void get_board_serial(struct tag_serialnr *serialnr)
|
|
{
|
|
char *str;
|
|
|
|
char *serial = getenv("serial#");
|
|
if (serial) {
|
|
str = strchr(serial, '_');
|
|
if (str && (strlen(str) >= 4)) {
|
|
serialnr->high = (*(str + 1) << 8) | *(str + 2);
|
|
serialnr->low = simple_strtoul(str + 3, NULL, 16);
|
|
}
|
|
} else {
|
|
serialnr->high = 0;
|
|
serialnr->low = 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_REVISION_TAG
|
|
u32 get_board_rev(void)
|
|
{
|
|
return hw_rev | 0x100;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
int misc_init_r(void)
|
|
{
|
|
char str[64];
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
|
|
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */
|
|
writel(1 << ATMEL_ID_USART0, &pmc->pcer);
|
|
/* Set USART_MODE = 1 (RS485) */
|
|
writel(1, 0xFFF8C004);
|
|
|
|
printf("USART0: ");
|
|
|
|
if (getenv_f("usart0", str, sizeof(str)) == -1) {
|
|
printf("No entry - assuming 1-wire\n");
|
|
/* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
|
|
} else {
|
|
if (strcmp(str, "1-wire") == 0) {
|
|
printf("%s\n", str);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
|
|
} else if (strcmp(str, "rs485") == 0) {
|
|
printf("%s\n", str);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
|
|
} else {
|
|
printf("Wrong entry - assuming 1-wire ");
|
|
printf("(valid values are '1-wire' or 'rs485')\n");
|
|
at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
|
|
}
|
|
}
|
|
#ifdef CONFIG_LCD
|
|
printf("Display memory address: 0x%08lX\n", gd->fb_base);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MISC_INIT_R */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
/* enable all clocks */
|
|
writel((1 << ATMEL_ID_PIOA) |
|
|
(1 << ATMEL_ID_PIOB) |
|
|
(1 << ATMEL_ID_PIOCDE) |
|
|
(1 << ATMEL_ID_TWI) |
|
|
(1 << ATMEL_ID_SPI0) |
|
|
#ifdef CONFIG_LCD
|
|
(1 << ATMEL_ID_LCDC) |
|
|
#endif
|
|
(1 << ATMEL_ID_UHP),
|
|
&pmc->pcer);
|
|
|
|
at91_seriald_hw_init();
|
|
|
|
/* arch number of OTC570-Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_OTC570;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* initialize ET1100 Controller */
|
|
otc570_ethercat_hw_init();
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
otc570_nand_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
at91_spi0_hw_init(1 << 0);
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
otc570_macb_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_AT91_CAN
|
|
at91_can_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
at91_uhp_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
otc570_lcd_hw_init();
|
|
#endif
|
|
return 0;
|
|
}
|