mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
2863724831
rk3036 mmc do not have internal dma, so we use fifo mode when read and write data, we get the fifo mode and fifo depth property from dts, pass to dw_mmc driver. Signed-off-by: Lin Huang <hl@rock-chips.com>
429 lines
10 KiB
Plaintext
429 lines
10 KiB
Plaintext
/*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/clock/rk3036-cru.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "rockchip,rk3036";
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
i2c1 = &i2c1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
mmc0 = &emmc;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x60000000 0x40000000>;
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "rockchip,rk3036-smp";
|
|
|
|
cpu0: cpu@f00 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf00>;
|
|
operating-points = <
|
|
/* KHz uV */
|
|
816000 1000000
|
|
>;
|
|
#cooling-cells = <2>; /* min followed by max */
|
|
clock-latency = <40000>;
|
|
clocks = <&cru ARMCLK>;
|
|
resets = <&cru SRST_CORE0>;
|
|
};
|
|
cpu1: cpu@f01 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf01>;
|
|
resets = <&cru SRST_CORE1>;
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma: pdma@20078000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x20078000 0x4000>;
|
|
arm,pl330-broken-no-flushp;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
clocks = <&cru ACLK_DMAC2>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
|
|
xin24m: oscillator {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xin24m";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
arm,cpu-registers-not-fw-configured;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
cru: clock-controller@20000000 {
|
|
compatible = "rockchip,rk3036-cru";
|
|
reg = <0x20000000 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
assigned-clocks = <&cru PLL_GPLL>;
|
|
assigned-clock-rates = <594000000>;
|
|
};
|
|
|
|
uart0: serial@20060000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20060000 0x100>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
};
|
|
|
|
uart1: serial@20064000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20064000 0x100>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_xfer>;
|
|
};
|
|
|
|
uart2: serial@20068000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20068000 0x100>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_xfer>;
|
|
};
|
|
|
|
pwm0: pwm@20050000 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050000 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@20050010 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050010 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm1_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@20050020 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050020 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@20050030 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050030 0x10>;
|
|
#pwm-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
sram: sram@10080000 {
|
|
compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
|
|
reg = <0x10080000 0x2000>;
|
|
};
|
|
|
|
gic: interrupt-controller@10139000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
|
|
reg = <0x10139000 0x1000>,
|
|
<0x1013a000 0x1000>,
|
|
<0x1013c000 0x2000>,
|
|
<0x1013e000 0x2000>;
|
|
interrupts = <GIC_PPI 9 0xf04>;
|
|
};
|
|
|
|
grf: syscon@20008000 {
|
|
compatible = "rockchip,rk3036-grf", "syscon";
|
|
reg = <0x20008000 0x1000>;
|
|
};
|
|
|
|
usb_otg: usb@10180000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x10180000 0x40000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG0>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <275>;
|
|
g-tx-fifo-size = <256 128 128 64 64 32>;
|
|
g-use-dma;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host: usb@101c0000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x101c0000 0x40000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG1>;
|
|
clock-names = "otg";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: dwmmc@1021c000 {
|
|
compatible = "rockchip,rk3288-dw-mshc";
|
|
clock-frequency = <37500000>;
|
|
clock-freq-min-max = <400000 37500000>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
|
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
|
|
dmas = <&pdma 12>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1021c000 0x4000>;
|
|
broken-cd;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
disable-wp;
|
|
fifo-mode;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
default-sample-phase = <158>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "rockchip,rk3036-pinctrl";
|
|
rockchip,grf = <&grf>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio0: gpio0@2007c000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x2007c000 0x100>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio1@20080000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20080000 0x100>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio2@20084000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20084000 0x100>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO2>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcfg_pull_up: pcfg-pull-up {
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcfg_pull_down: pcfg-pull-down {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pcfg_pull_none: pcfg-pull-none {
|
|
bias-disable;
|
|
};
|
|
|
|
emmc {
|
|
/*
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 25 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 26 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 27 RK_FUNC_2 &pcfg_pull_none>;
|
|
/*
|
|
<1 28 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 29 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 30 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 31 RK_FUNC_2 &pcfg_pull_up>;
|
|
*/
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
uart0_xfer: uart0-xfer {
|
|
rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 17 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_cts: uart0-cts {
|
|
rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts: uart0-rts {
|
|
rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
uart1_xfer: uart1-xfer {
|
|
rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
|
|
<2 23 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart1 */
|
|
};
|
|
|
|
uart2 {
|
|
uart2_xfer: uart2-xfer {
|
|
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 19 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart2 */
|
|
};
|
|
|
|
pwm0 {
|
|
pwm0_pin: pwm0-pin {
|
|
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm1 {
|
|
pwm1_pin: pwm1-pin {
|
|
rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm2 {
|
|
pwm2_pin: pwm2-pin {
|
|
rockchip,pins = <0 1 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm3 {
|
|
pwm3_pin: pwm3-pin {
|
|
rockchip,pins = <0 27 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
i2c1_xfer: i2c1-xfer {
|
|
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 3 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@20056000 {
|
|
compatible = "rockchip,rk3288-i2c";
|
|
reg = <0x20056000 0x1000>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "i2c";
|
|
clocks = <&cru PCLK_I2C1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_xfer>;
|
|
status = "disabled";
|
|
};
|
|
};
|