mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
74 lines
2.6 KiB
C
74 lines
2.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* FSL USB HOST xHCI Controller
|
|
*
|
|
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
|
|
*/
|
|
|
|
#ifndef _ASM_ARCH_XHCI_FSL_H_
|
|
#define _ASM_ARCH_XHCI_FSL_H_
|
|
|
|
/* Default to the FSL XHCI defines */
|
|
#define USB3_PWRCTL_CLK_CMD_MASK 0x3FE000
|
|
#define USB3_PWRCTL_CLK_FREQ_MASK 0xFFC
|
|
#define USB3_PHY_PARTIAL_RX_POWERON BIT(6)
|
|
#define USB3_PHY_RX_POWERON BIT(14)
|
|
#define USB3_PHY_TX_POWERON BIT(15)
|
|
#define USB3_PHY_TX_RX_POWERON (USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
|
|
#define USB3_PWRCTL_CLK_CMD_SHIFT 14
|
|
#define USB3_PWRCTL_CLK_FREQ_SHIFT 22
|
|
#define USB3_ENABLE_BEAT_BURST 0xF
|
|
#define USB3_ENABLE_BEAT_BURST_MASK 0xFF
|
|
#define USB3_SET_BEAT_BURST_LIMIT 0xF00
|
|
|
|
/* USBOTGSS_WRAPPER definitions */
|
|
#define USBOTGSS_WRAPRESET BIT(17)
|
|
#define USBOTGSS_DMADISABLE BIT(16)
|
|
#define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
|
|
#define USBOTGSS_STANDBYMODE_SMRT BIT(5)
|
|
#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
|
|
#define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
|
|
#define USBOTGSS_IDLEMODE_SMRT BIT(3)
|
|
#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_0 bit */
|
|
#define USBOTGSS_COREIRQ_EN BIT(1)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_1 bits */
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN BIT(1)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN BIT(3)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN BIT(4)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN BIT(5)
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN BIT(8)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN BIT(11)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN BIT(12)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN BIT(13)
|
|
#define USBOTGSS_IRQ_SET_1_OEVT_EN BIT(16)
|
|
#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN BIT(17)
|
|
|
|
struct fsl_xhci {
|
|
struct xhci_hccr *hcd;
|
|
struct dwc3 *dwc3_reg;
|
|
};
|
|
|
|
#if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_ARCH_LS1012A)
|
|
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
|
|
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
|
|
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
|
|
#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
|
|
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
|
|
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
|
|
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
|
|
#elif defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
|
|
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
|
|
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
|
|
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR
|
|
#endif
|
|
|
|
#define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
|
|
CONFIG_SYS_FSL_XHCI_USB2_ADDR, \
|
|
CONFIG_SYS_FSL_XHCI_USB3_ADDR}
|
|
#endif /* _ASM_ARCH_XHCI_FSL_H_ */
|