brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-05 02:36:39 +09:00
Code Issues Projects Releases Wiki Activity
4893e34b00
u-boot-brain/board/denx/ma5d4evk/ma5d4evk.c
Wenyou Yang 2dc63f7367 gpio: at91_gpio: remove CPU_HAS_PIO3 macro 
The intention of the removal is the preparation to introduce the
new AT91 PIO pinctrl driver.

Use the union to make the PIO3 and PIO2's registers be together
and make their offset aligned.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-13 14:44:50 -06:00

413 lines
12 KiB
C
Raw Blame History

/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
#include <atmel_mci.h>
#include <lcd.h>
#include <mmc.h>
#include <net.h>
#include <netdev.h>
#include <spi.h>
#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ATMEL_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
}
static void ma5d4evk_spi0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_SPI0);
}
#endif /* CONFIG_ATMEL_SPI */
#ifdef CONFIG_CMD_USB
static void ma5d4evk_usb_hw_init(void)
{
at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
}
#endif
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
.vl_clk = 33500000,
.vl_bpix = LCD_BPP,
.vl_tft = 1,
.vl_hsync_len = 10,
.vl_left_margin = 89,
.vl_right_margin = 164,
.vl_vsync_len = 10,
.vl_upper_margin = 23,
.vl_lower_margin = 10,
.mmio = ATMEL_BASE_LCDC,
};
/* No power up/down pin for the LCD pannel */
void lcd_enable(void) { /* Empty! */ }
void lcd_disable(void) { /* Empty! */ }
unsigned int has_lcdc(void)
{
return 1;
}
static void ma5d4evk_lcd_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
}
#endif /* CONFIG_LCD */
#ifdef CONFIG_GENERIC_ATMEL_MCI
/* On-SoM eMMC */
void ma5d4evk_mci0_hw_init(void)
{
at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
}
/* On-board MicroSD slot */
void ma5d4evk_mci1_hw_init(void)
{
at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
/* Deal with WP pin on the microSD slot. */
at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI1);
}
int board_mmc_init(bd_t *bis)
{
int ret;
/* De-assert reset on On-SoM eMMC */
at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
if (ret) /* eMMC init failed, skip it. */
at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
/* Enable the power supply to On-board MicroSD */
at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
if (ret) /* uSD init failed, power it down. */
at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
return 0;
}
#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB
void ma5d4evk_macb0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC0);
}
#endif
static void ma5d4evk_serial_hw_init(void)
{
/* USART0 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART0);
/* USART1 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
int board_early_init_f(void)
{
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
/* Configure LEDs as OFF */
at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
/* Reset CAN controllers */
at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
udelay(100);
at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
ma5d4evk_serial_hw_init();
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_ATMEL_SPI
ma5d4evk_spi0_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
ma5d4evk_mci0_hw_init();
ma5d4evk_mci1_hw_init();
#endif
#ifdef CONFIG_MACB
ma5d4evk_macb0_hw_init();
#endif
#ifdef CONFIG_LCD
ma5d4evk_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
ma5d4evk_usb_hw_init();
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
at91_udp_hw_init();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
usb_eth_initialize(bis);
#endif
#endif
return rc;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
ma5d4evk_spi0_hw_init();
}
static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
{
ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_13 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_NDQS_DISABLED |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddr2->rtr = 0x2b0;
ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddrc_config ddr2;
ddr2_conf(&ddr2);
/* enable MPDDR clock */
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
/* DDRAM2 Controller initialize */
ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(87) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
writel(0x0 << 8, &pmc->pllicpr);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif
Reference in New Issue View Git Blame Copy Permalink