mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 04:48:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
453 lines
14 KiB
C
453 lines
14 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_DEEP_SLEEP
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 100000000
|
|
#define CONFIG_DDR_CLK_FREQ 100000000
|
|
|
|
#define DDR_SDRAM_CFG 0x470c0008
|
|
#define DDR_CS0_BNDS 0x008000bf
|
|
#define DDR_CS0_CONFIG 0x80014302
|
|
#define DDR_TIMING_CFG_0 0x50550004
|
|
#define DDR_TIMING_CFG_1 0xbcb38c56
|
|
#define DDR_TIMING_CFG_2 0x0040d120
|
|
#define DDR_TIMING_CFG_3 0x010e1000
|
|
#define DDR_TIMING_CFG_4 0x00000001
|
|
#define DDR_TIMING_CFG_5 0x03401400
|
|
#define DDR_SDRAM_CFG_2 0x00401010
|
|
#define DDR_SDRAM_MODE 0x00061c60
|
|
#define DDR_SDRAM_MODE_2 0x00180000
|
|
#define DDR_SDRAM_INTERVAL 0x18600618
|
|
#define DDR_DDR_WRLVL_CNTL 0x8655f605
|
|
#define DDR_DDR_WRLVL_CNTL_2 0x05060607
|
|
#define DDR_DDR_WRLVL_CNTL_3 0x05050505
|
|
#define DDR_DDR_CDR1 0x80040000
|
|
#define DDR_DDR_CDR2 0x00000001
|
|
#define DDR_SDRAM_CLK_CNTL 0x02000000
|
|
#define DDR_DDR_ZQ_CNTL 0x89080600
|
|
#define DDR_CS0_CONFIG_2 0
|
|
#define DDR_SDRAM_CFG_MEM_EN 0x80000000
|
|
#define SDRAM_CFG2_D_INIT 0x00000010
|
|
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
|
|
#define SDRAM_CFG2_FRC_SR 0x80000000
|
|
#define SDRAM_CFG_BI 0x00000001
|
|
|
|
#ifdef CONFIG_RAMBOOT_PBL
|
|
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
|
|
#endif
|
|
|
|
#ifdef CONFIG_SD_BOOT
|
|
#ifdef CONFIG_SD_BOOT_QSPI
|
|
#define CONFIG_SYS_FSL_PBL_RCW \
|
|
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
|
|
#else
|
|
#define CONFIG_SYS_FSL_PBL_RCW \
|
|
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
|
|
#endif
|
|
|
|
#ifdef CONFIG_NXP_ESBC
|
|
/*
|
|
* HDR would be appended at end of image and copied to DDR along
|
|
* with U-Boot image.
|
|
*/
|
|
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
|
|
#endif /* ifdef CONFIG_NXP_ESBC */
|
|
|
|
#define CONFIG_SPL_MAX_SIZE 0x1a000
|
|
#define CONFIG_SPL_STACK 0x1001d000
|
|
#define CONFIG_SPL_PAD_TO 0x1c000
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
|
|
#ifdef CONFIG_U_BOOT_HDR_SIZE
|
|
/*
|
|
* HDR would be appended at end of image and copied to DDR along
|
|
* with U-Boot image. Here u-boot max. size is 512K. So if binary
|
|
* size increases then increase this size in case of secure boot as
|
|
* it uses raw u-boot image instead of fit image.
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_LEN 0x100000
|
|
#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
|
|
#endif
|
|
|
|
#define PHYS_SDRAM 0x80000000
|
|
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
|
|
|
|
/*
|
|
* IFC Definitions
|
|
*/
|
|
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
|
|
#define CONFIG_FSL_IFC
|
|
#define CONFIG_SYS_FLASH_BASE 0x60000000
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
|
|
|
|
#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
|
|
#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
|
|
CSPR_PORT_SIZE_16 | \
|
|
CSPR_MSEL_NOR | \
|
|
CSPR_V)
|
|
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
|
|
|
|
/* NOR Flash Timing Params */
|
|
#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
|
|
CSOR_NOR_TRHZ_80)
|
|
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
|
|
FTIM0_NOR_TEADC(0x5) | \
|
|
FTIM0_NOR_TAVDS(0x0) | \
|
|
FTIM0_NOR_TEAHC(0x5))
|
|
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
|
|
FTIM1_NOR_TRAD_NOR(0x1A) | \
|
|
FTIM1_NOR_TSEQRAD_NOR(0x13))
|
|
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
|
|
FTIM2_NOR_TCH(0x4) | \
|
|
FTIM2_NOR_TWP(0x1c) | \
|
|
FTIM2_NOR_TWPH(0x0e))
|
|
#define CONFIG_SYS_NOR_FTIM3 0
|
|
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
|
|
|
|
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
|
|
#define CONFIG_SYS_WRITE_SWAPPED_DATA
|
|
#endif
|
|
|
|
/* CPLD */
|
|
|
|
#define CONFIG_SYS_CPLD_BASE 0x7fb00000
|
|
#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
|
|
|
|
#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
|
|
#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
|
|
CSPR_PORT_SIZE_8 | \
|
|
CSPR_MSEL_GPCM | \
|
|
CSPR_V)
|
|
#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
|
|
#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
|
|
CSOR_NOR_NOR_MODE_AVD_NOR | \
|
|
CSOR_NOR_TRHZ_80)
|
|
|
|
/* CPLD Timing parameters for IFC GPCM */
|
|
#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
|
|
FTIM0_GPCM_TEADC(0xf) | \
|
|
FTIM0_GPCM_TEAHC(0xf))
|
|
#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
|
|
FTIM1_GPCM_TRAD(0x3f))
|
|
#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
|
|
FTIM2_GPCM_TCH(0xf) | \
|
|
FTIM2_GPCM_TWP(0xff))
|
|
#define CONFIG_SYS_FPGA_FTIM3 0x0
|
|
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
|
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
|
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
|
|
#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
|
|
#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
|
|
#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
|
|
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
|
|
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
|
|
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
|
|
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#ifdef CONFIG_LPUART
|
|
#define CONFIG_LPUART_32B_REG
|
|
#else
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#ifndef CONFIG_DM_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#endif
|
|
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
#endif
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#ifndef CONFIG_DM_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#else
|
|
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
|
|
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
|
|
#endif
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
|
|
/* EEPROM */
|
|
#define CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 1
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
|
|
/*
|
|
* MMC
|
|
*/
|
|
|
|
/*
|
|
* Video
|
|
*/
|
|
#ifdef CONFIG_VIDEO_FSL_DCU_FB
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
|
|
#define CONFIG_FSL_DCU_SII9022A
|
|
#define CONFIG_SYS_I2C_DVI_BUS_NUM 1
|
|
#define CONFIG_SYS_I2C_DVI_ADDR 0x39
|
|
#endif
|
|
|
|
/*
|
|
* eTSEC
|
|
*/
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
#define CONFIG_ETHPRIME "ethernet@2d10000"
|
|
#endif
|
|
|
|
/* PCIe */
|
|
#define CONFIG_PCIE1 /* PCIE controller 1 */
|
|
#define CONFIG_PCIE2 /* PCIE controller 2 */
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#endif
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
#define CONFIG_PEN_ADDR_BIG_ENDIAN
|
|
#define CONFIG_LAYERSCAPE_NS_ACCESS
|
|
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
|
|
#define COUNTER_FREQUENCY 12500000
|
|
|
|
#define CONFIG_HWCONFIG
|
|
#define HWCONFIG_BUFFER_SIZE 256
|
|
|
|
#define CONFIG_FSL_DEVICE_DISABLE
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(USB, usb, 0) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#ifdef CONFIG_LPUART
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
|
|
"cma=64M@0x0-0xb0000000\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_addr=0x64f00000\0" \
|
|
"kernel_addr=0x65000000\0" \
|
|
"scriptaddr=0x80000000\0" \
|
|
"scripthdraddr=0x80080000\0" \
|
|
"fdtheader_addr_r=0x80100000\0" \
|
|
"kernelheader_addr_r=0x80200000\0" \
|
|
"kernel_addr_r=0x81000000\0" \
|
|
"fdt_addr_r=0x90000000\0" \
|
|
"ramdisk_addr_r=0xa0000000\0" \
|
|
"load_addr=0xa0000000\0" \
|
|
"kernel_size=0x2800000\0" \
|
|
"kernel_addr_sd=0x8000\0" \
|
|
"kernel_size_sd=0x14000\0" \
|
|
"othbootargs=cma=64M@0x0-0xb0000000\0" \
|
|
BOOTENV \
|
|
"boot_scripts=ls1021atwr_boot.scr\0" \
|
|
"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
|
|
"scan_dev_for_boot_part=" \
|
|
"part list ${devtype} ${devnum} devplist; " \
|
|
"env exists devplist || setenv devplist 1; " \
|
|
"for distro_bootpart in ${devplist}; do " \
|
|
"if fstype ${devtype} " \
|
|
"${devnum}:${distro_bootpart} " \
|
|
"bootfstype; then " \
|
|
"run scan_dev_for_boot; " \
|
|
"fi; " \
|
|
"done\0" \
|
|
"scan_dev_for_boot=" \
|
|
"echo Scanning ${devtype} " \
|
|
"${devnum}:${distro_bootpart}...; " \
|
|
"for prefix in ${boot_prefixes}; do " \
|
|
"run scan_dev_for_scripts; " \
|
|
"done;" \
|
|
"\0" \
|
|
"boot_a_script=" \
|
|
"load ${devtype} ${devnum}:${distro_bootpart} " \
|
|
"${scriptaddr} ${prefix}${script}; " \
|
|
"env exists secureboot && load ${devtype} " \
|
|
"${devnum}:${distro_bootpart} " \
|
|
"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
|
|
"env exists secureboot " \
|
|
"&& esbc_validate ${scripthdraddr};" \
|
|
"source ${scriptaddr}\0" \
|
|
"installer=load mmc 0:2 $load_addr " \
|
|
"/flex_installer_arm32.itb; " \
|
|
"bootm $load_addr#ls1021atwr\0" \
|
|
"qspi_bootcmd=echo Trying load from qspi..;" \
|
|
"sf probe && sf read $load_addr " \
|
|
"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
|
|
"nor_bootcmd=echo Trying load from nor..;" \
|
|
"cp.b $kernel_addr $load_addr " \
|
|
"$kernel_size && bootm $load_addr#$board\0"
|
|
#else
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
|
|
"cma=64M@0x0-0xb0000000\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_addr=0x64f00000\0" \
|
|
"kernel_addr=0x61000000\0" \
|
|
"kernelheader_addr=0x60800000\0" \
|
|
"scriptaddr=0x80000000\0" \
|
|
"scripthdraddr=0x80080000\0" \
|
|
"fdtheader_addr_r=0x80100000\0" \
|
|
"kernelheader_addr_r=0x80200000\0" \
|
|
"kernel_addr_r=0x81000000\0" \
|
|
"kernelheader_size=0x40000\0" \
|
|
"fdt_addr_r=0x90000000\0" \
|
|
"ramdisk_addr_r=0xa0000000\0" \
|
|
"load_addr=0xa0000000\0" \
|
|
"kernel_size=0x2800000\0" \
|
|
"kernel_addr_sd=0x8000\0" \
|
|
"kernel_size_sd=0x14000\0" \
|
|
"kernelhdr_addr_sd=0x4000\0" \
|
|
"kernelhdr_size_sd=0x10\0" \
|
|
"othbootargs=cma=64M@0x0-0xb0000000\0" \
|
|
BOOTENV \
|
|
"boot_scripts=ls1021atwr_boot.scr\0" \
|
|
"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
|
|
"scan_dev_for_boot_part=" \
|
|
"part list ${devtype} ${devnum} devplist; " \
|
|
"env exists devplist || setenv devplist 1; " \
|
|
"for distro_bootpart in ${devplist}; do " \
|
|
"if fstype ${devtype} " \
|
|
"${devnum}:${distro_bootpart} " \
|
|
"bootfstype; then " \
|
|
"run scan_dev_for_boot; " \
|
|
"fi; " \
|
|
"done\0" \
|
|
"scan_dev_for_boot=" \
|
|
"echo Scanning ${devtype} " \
|
|
"${devnum}:${distro_bootpart}...; " \
|
|
"for prefix in ${boot_prefixes}; do " \
|
|
"run scan_dev_for_scripts; " \
|
|
"done;" \
|
|
"\0" \
|
|
"boot_a_script=" \
|
|
"load ${devtype} ${devnum}:${distro_bootpart} " \
|
|
"${scriptaddr} ${prefix}${script}; " \
|
|
"env exists secureboot && load ${devtype} " \
|
|
"${devnum}:${distro_bootpart} " \
|
|
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
|
|
"&& esbc_validate ${scripthdraddr};" \
|
|
"source ${scriptaddr}\0" \
|
|
"qspi_bootcmd=echo Trying load from qspi..;" \
|
|
"sf probe && sf read $load_addr " \
|
|
"$kernel_addr $kernel_size; env exists secureboot " \
|
|
"&& sf read $kernelheader_addr_r $kernelheader_addr " \
|
|
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
|
|
"bootm $load_addr#$board\0" \
|
|
"nor_bootcmd=echo Trying load from nor..;" \
|
|
"cp.b $kernel_addr $load_addr " \
|
|
"$kernel_size; env exists secureboot " \
|
|
"&& cp.b $kernelheader_addr $kernelheader_addr_r " \
|
|
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
|
|
"bootm $load_addr#$board\0" \
|
|
"sd_bootcmd=echo Trying load from SD ..;" \
|
|
"mmcinfo && mmc read $load_addr " \
|
|
"$kernel_addr_sd $kernel_size_sd && " \
|
|
"env exists secureboot && mmc read $kernelheader_addr_r " \
|
|
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
|
|
" && esbc_validate ${kernelheader_addr_r};" \
|
|
"bootm $load_addr#$board\0"
|
|
#endif
|
|
|
|
#undef CONFIG_BOOTCOMMAND
|
|
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
|
|
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
|
|
"env exists secureboot && esbc_halt"
|
|
#elif defined(CONFIG_SD_BOOT)
|
|
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \
|
|
"env exists secureboot && esbc_halt;"
|
|
#else
|
|
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;" \
|
|
"env exists secureboot && esbc_halt;"
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x82000000
|
|
|
|
#define CONFIG_LS102XA_STREAM_ID
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
|
|
#undef CONFIG_DM_I2C
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_QE_FW_ADDR 0x60940000
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
|
|
#include <asm/fsl_secure_boot.h>
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
#endif
|