u-boot-brain/board/freescale
Aneesh Bansal 467a40dfe3 powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041
Secure Boot Target is added for NAND for P3041.
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF.

In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is
configured as SRAM. U-Boot binary will be located on SRAM configured
at address 0xBFF00000.
In the U-Boot code, TLB entries are created to map the virtual address
0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:18 -07:00
..
b4860qds B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig 2014-12-05 08:06:14 -08:00
bsc9131rdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
bsc9132qds driver/ifc: Add 64KB page support 2015-04-23 16:46:50 -07:00
c29xpcie driver/ifc: Add 64KB page support 2015-04-23 16:46:50 -07:00
common powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
corenet_ds powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
ls1021aqds arm/ls102xa: Add little-endian mode support for audio IPs 2015-07-20 11:44:38 -07:00
ls1021atwr arm/ls102xa: Add little-endian mode support for audio IPs 2015-07-20 11:44:38 -07:00
ls2085a armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr 2015-07-20 11:44:36 -07:00
ls2085aqds armv8/ls2085aqds: DSPI pin muxing configure through QIXIS 2015-07-20 11:44:39 -07:00
ls2085ardb armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLD 2015-07-20 11:44:39 -07:00
m547xevb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m548xevb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5208evbe m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5235evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5249evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5253demo m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5253evbe m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5272c3 m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5275evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5282evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5329evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m5373evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m52277evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m53017evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m54418twr m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m54451evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
m54455evb m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
mpc832xemds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc837xemds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc837xerdb mpc837xerdb: "fix Calling __hwconfig without a buffer" warning 2015-03-02 15:11:36 -05:00
mpc5121ads fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8308rdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8313erdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8315erdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8323erdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8349emds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8349itx fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8536ds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8540ads fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8541cds MAINTAINERS: comment out invalid maintainers 2014-09-24 18:30:28 -04:00
mpc8544ds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8548cds MAINTAINERS: comment out blank M: field 2014-09-24 18:30:28 -04:00
mpc8555cds MAINTAINERS: comment out invalid maintainers 2014-09-24 18:30:28 -04:00
mpc8560ads fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8568mds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8569mds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8572ds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8610hpcd fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
mpc8641hpcn fdt: Try to use fdt_address_cells()/fdt_size_cells() 2014-11-21 04:43:18 +01:00
mx6qarm2 imx:mx6qarm2 add board level support for usb 2014-12-19 15:32:13 +01:00
mx6qsabreauto imx:mx6 set normal APS and standby PFM mode 2015-02-11 12:38:48 +01:00
mx6sabresd mx6sabresd: Remove uneeded ifdef 2015-04-22 16:02:46 +02:00
mx6slevk mx6slevk: Provide a proper pad configuration for OTG1_ID pin 2015-03-02 11:55:26 +01:00
mx6sxsabresd imx:mx6 set normal APS and standby PFM mode 2015-02-11 12:38:48 +01:00
mx23evk kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx25pdk mx25pdk: Turn on the LCD supply 2015-03-02 09:57:05 +01:00
mx28evk mx28evk: README: Revision C is also supported 2014-11-12 09:05:57 +01:00
mx31ads kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx31pdk kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx35pdk kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx51evk mx51evk: Fix MX51EVK_USB_CLK_EN_B definition 2014-12-19 15:32:14 +01:00
mx53ard mx53ard: Fix error handling in board_mmc_init() 2014-11-21 16:47:55 +01:00
mx53evk mx53evk: Fix error handling in board_mmc_init() 2014-11-21 16:47:55 +01:00
mx53loco mx53loco: Disable printing cpuinfo 2015-04-08 10:45:50 +02:00
mx53smd mx53smd: Fix error handling in board_mmc_init() 2014-11-21 16:47:55 +01:00
p1_p2_rdb_pc powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issue 2015-07-28 14:41:15 -07:00
p1_twr fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
p1010rdb driver/ifc: Add 64KB page support 2015-04-23 16:46:50 -07:00
p1022ds fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
p1023rdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
p2041rdb fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
qemu-ppce500 fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
t4qds powerpc/t4240qds: Update RCW, defconfig and maintainer 2015-05-04 09:26:01 -07:00
t4rdb powerpc/t4rdb: fix cpld reset altbank 2015-07-28 14:41:15 -07:00
t102xqds powerpc/t104x, t102x: Update CPC debug register value in PBI commands 2015-07-28 14:41:15 -07:00
t102xrdb powerpc/t104x, t102x: Update CPC debug register value in PBI commands 2015-07-28 14:41:15 -07:00
t104xrdb powerpc/t104x, t102x: Update CPC debug register value in PBI commands 2015-07-28 14:41:15 -07:00
t208xqds powerpc/t2080: updating rcw for silicon v1.1 2014-12-05 08:06:14 -08:00
t208xrdb t2080rdb/rcw: update ddr frequency from 1600MT/s to 1867MT/s 2015-05-04 09:25:53 -07:00
t1040qds powerpc/t104x, t102x: Update CPC debug register value in PBI commands 2015-07-28 14:41:15 -07:00
vf610twr ARM: vf610: Enable external 32KHz oscillator 2015-04-23 14:56:08 -04:00