mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Bryan O'Donoghue](/assets/img/avatar_default.png)
This patch sets up an alias for mmc0 to usdhc3. Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing warp7 bootscripts and environment variables that rely on mmc 0. Setup the alias of mmc0 and usdhc3 so that existing warp7 boot code will work unmodified. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
443 lines
9.6 KiB
Plaintext
443 lines
9.6 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2016 NXP Semiconductors.
|
|
* Author: Fabio Estevam <fabio.estevam@nxp.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx7s.dtsi"
|
|
|
|
/ {
|
|
model = "Warp i.MX7 Board";
|
|
compatible = "warp,imx7s-warp", "fsl,imx7s";
|
|
|
|
memory@80000000 {
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
aliases {
|
|
mmc0 = &usdhc3;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&pinctrl_gpio>;
|
|
autorepeat;
|
|
|
|
back {
|
|
label = "Back";
|
|
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_BACK>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
reg_brcm: regulator-brcm {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_brcm_reg>;
|
|
regulator-name = "brcm_reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <200000>;
|
|
};
|
|
|
|
reg_bt: regulator-bt {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_bt_reg>;
|
|
enable-active-high;
|
|
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "bt_reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "imx7-sgtl5000";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&dailink_master>;
|
|
simple-audio-card,frame-master = <&dailink_master>;
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sai1>;
|
|
};
|
|
|
|
dailink_master: simple-audio-card,codec {
|
|
sound-dai = <&codec>;
|
|
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&clks {
|
|
assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
|
|
assigned-clock-rates = <884736000>;
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze3000@8 {
|
|
compatible = "fsl,pfuze3000";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1a {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
|
sw1c_reg: sw1b {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vldo2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vccsd {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: v33 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vldo4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
status = "okay";
|
|
|
|
codec: sgtl5000@a {
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x0a>;
|
|
compatible = "fsl,sgtl5000";
|
|
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai1_mclk>;
|
|
VDDA-supply = <&vgen4_reg>;
|
|
VDDIO-supply = <&vgen4_reg>;
|
|
VDDD-supply = <&vgen2_reg>;
|
|
};
|
|
|
|
mpl3115@60 {
|
|
compatible = "fsl,mpl3115";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
&sai1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai1>;
|
|
assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
|
|
<&clks IMX7D_SAI1_ROOT_CLK>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
|
|
assigned-clock-rates = <0>, <36864000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart6>;
|
|
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
fsl,dte-mode;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
bus-width = <4>;
|
|
keep-power-in-suspend;
|
|
no-1-8-v;
|
|
non-removable;
|
|
vmmc-supply = <®_brcm>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
|
|
assigned-clock-rates = <400000000>;
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
fsl,tuning-step = <2>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_brcm_reg: brcmreggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */
|
|
>;
|
|
};
|
|
|
|
pinctrl_bt_reg: btreggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* BT_REG_ON */
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio: gpiogrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x14
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
|
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
|
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
|
|
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
|
|
MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai1: sai1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
|
|
MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f
|
|
MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
|
|
MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai1_mclk: sai1mclkgrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
|
|
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
|
|
MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
|
|
MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79
|
|
MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart6: uart6grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79
|
|
MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
|
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
|
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
|
|
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
|
|
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b
|
|
>;
|
|
};
|
|
};
|
|
|
|
&iomuxc_lpsr {
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
|
|
>;
|
|
};
|
|
};
|